Quick answer
The 1990 Porsche 911 typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 Porsche 911 keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1990 Porsche 911
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1990 Porsche 911 use?
- How we make a 1990 Porsche 911 key
- How Porsche key and immobilizer systems work
- Common Porsche key and lock problems
- All keys lost or just need a spare?
- Stranded with your Porsche right now?
- 1990 Porsche 911 key replacement across Compton
- Getting a 1990 Porsche 911 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Porsche key?
- What affects the cost of a 1990 Porsche 911 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Compton choose Big Daddy
- Looking after your Porsche key
- Choosing a car locksmith you can trust
- Other Porsche 911 years
- Other Porsche models
- Related automotive locksmith services in Compton
- 1990 Porsche 911 keys near Compton
- 1990 Porsche 911 key replacement in Compton: frequently asked questions
What kind of key does a 1990 Porsche 911 use?
The 1990 Porsche 911 typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1990 Porsche 911 key
For the 1990 Porsche 911 we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1990 model year. For other years, see the Porsche 911 key replacement overview, or browse all Porsche models.
How Porsche key and immobilizer systems work
Volkswagen, Audi and Porsche use a multi-generation immobilizer that ties the key to the instrument cluster, engine computer and, on later cars, several other modules. Keys are laser-cut and many must be pre-coded to the vehicle before they can be adapted. Older generations are programmed with a PIN; MQB-platform and newer vehicles need online or dealer-level procedures, and some keys are supplied only against the VIN.
Porsche keys are laser-cut with the remote in the head, and newer models use a car-shaped fob that turns in the dash, with Entry & Drive proximity optional. Many late-model Porsche keys are dealer-supplied.
Common Porsche key and lock problems
These are the issues we see most often on Porsche vehicles in Compton:
- Flip keys with worn buttons or a broken blade hinge
- An immobilizer warning after cluster or module replacement
- Slot-type fobs that are not read because of a failing ignition switch
- Late-model vehicles whose keys must be dealer-ordered
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Porsche right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1990 Porsche 911 key replacement across Compton
Located in Los Angeles County, Compton is an incorporated city within our Gateway Cities service area. Customers anywhere in Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor, can have a mobile technician sent directly to them. We serve the 90220, 90221, and 90222 ZIP codes.
Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.
Whether you are at home, at work, or stuck near Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, or Gateway Towne Center, tell the dispatcher the nearest landmark and we will find you. Compton is served by SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1990 Porsche 911 key made, step by step
Call with the year, make and model
Tell us you need a key for a 1990 Porsche 911, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Porsche key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1990 Porsche 911 key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The key is locked in the trunk and the trunk release is disabled.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Compton choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Porsche key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Porsche 911 years
- 2026 911
- 2025 911
- 2024 911
- 2023 911
- 2022 911
- 2021 911
- 2020 911
- 2019 911
- 2018 911
- 2017 911
- 2016 911
- 2015 911
- 2014 911
- 2013 911
- 2012 911
- 2011 911
- 2010 911
- 2009 911
- 2008 911
- 2007 911
- 2006 911
- 2005 911
- 2004 911
- 2003 911
- 2002 911
- 2001 911
- 2000 911
- 1999 911
- 1998 911
- 1997 911
- 1996 911
- 1995 911
- 1994 911
- 1993 911
- 1992 911
- 1991 911
Other Porsche models
- Porsche Boxster keys
- Porsche Cayenne keys
- Porsche Cayman keys
- Porsche Panamera keys
- Porsche Macan keys
- Porsche Taycan keys
Related automotive locksmith services in Compton
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Key Fob Programming
Programming new or replacement key fobs.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
1990 Porsche 911 keys near Compton
We make 1990 Porsche 911 keys in the communities around Compton as well. See the main 1990 Porsche 911 key replacement page or the Compton locksmith page.
- 1990 Porsche 911 keys in Lynwood
- 1990 Porsche 911 keys in Willowbrook
- 1990 Porsche 911 keys in Paramount
- 1990 Porsche 911 keys in South Gate
- 1990 Porsche 911 keys in Cudahy
- 1990 Porsche 911 keys in Athens
- 1990 Porsche 911 keys in Gardena
- 1990 Porsche 911 keys in Westmont
- 1990 Porsche 911 keys in Carson
- 1990 Porsche 911 keys in Lakewood
- 1990 Porsche 911 keys in Downey
- 1990 Porsche 911 keys in Huntington Park
1990 Porsche 911 key replacement in Compton: frequently asked questions
Does a 1990 Porsche 911 key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1990 Porsche 911 key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Porsche key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can every Porsche key be made by a locksmith?
Most can, including many laser-cut flip keys and proximity fobs. Some recent models require a key ordered from the dealer by VIN. Call with your VIN and we will tell you before you spend anything.
Why do Porsche keys cost more than many other brands?
The keys are laser-cut, the electronics are model-specific, and the immobilizer requires specialized equipment and security data to program.
Is a locksmith-made Porsche key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1990 Porsche 911 if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do I have to tow my 1990 Porsche 911 to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a 1990 Porsche 911 key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
How much does a 1990 Porsche 911 key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Are you open 24 hours in Compton?
Yes. We take calls and dispatch to Compton 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Compton?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Compton and the rest of the Gateway Cities area. All work is done at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
