Quick answer
The 2004 Subaru Baja typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2004 Subaru Baja keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2004 Subaru Baja
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2004 Subaru Baja use?
- How we make a 2004 Subaru Baja key
- How Subaru key and immobilizer systems work
- Common Subaru key and lock problems
- All keys lost or just need a spare?
- Stranded with your Subaru right now?
- 2004 Subaru Baja key replacement across Compton
- Getting a 2004 Subaru Baja key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Subaru key?
- What affects the cost of a 2004 Subaru Baja key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Compton choose Big Daddy
- Looking after your Subaru key
- Choosing a car locksmith you can trust
- Other Subaru Baja years
- Other Subaru models
- Related automotive locksmith services in Compton
- 2004 Subaru Baja keys near Compton
- 2004 Subaru Baja key replacement in Compton: frequently asked questions
What kind of key does a 2004 Subaru Baja use?
The 2004 Subaru Baja typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2004 Subaru Baja key
For the 2004 Subaru Baja we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2004 model year. For other years, see the Subaru Baja key replacement overview, or browse all Subaru models.
How Subaru key and immobilizer systems work
Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.
Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.
Common Subaru key and lock problems
These are the issues we see most often on Subaru vehicles in Compton:
- Lost keys on vehicles where every key is registered at once
- Remote-head keys with failed buttons
- Proximity fobs not detected after battery replacement
- Uncertainty about whether older Imprezas and Foresters have a chip
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Subaru right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2004 Subaru Baja key replacement across Compton
Located in Los Angeles County, Compton is an incorporated city within our Gateway Cities service area. We cover every part of Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90220, 90221, and 90222.
Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.
People call us from all over Compton, including the areas around Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, and Gateway Towne Center. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Compton follows SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. You get a realistic arrival estimate when you call.
Getting a 2004 Subaru Baja key made, step by step
Call with the year, make and model
Tell us you need a key for a 2004 Subaru Baja, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Subaru key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2004 Subaru Baja key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
Why drivers in Compton choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Subaru key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
Other Subaru Baja years
Other Subaru models
- Subaru Legacy keys
- Subaru Impreza keys
- Subaru Outback keys
- Subaru Forester keys
- Subaru WRX keys
- Subaru BRZ keys
- Subaru Crosstrek keys
- Subaru Tribeca keys
- Subaru Ascent keys
- Subaru Solterra keys
Related automotive locksmith services in Compton
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Key Fob Programming
Programming new or replacement key fobs.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
2004 Subaru Baja keys near Compton
We make 2004 Subaru Baja keys in the communities around Compton as well. See the main 2004 Subaru Baja key replacement page or the Compton locksmith page.
- 2004 Subaru Baja keys in Lynwood
- 2004 Subaru Baja keys in Willowbrook
- 2004 Subaru Baja keys in Paramount
- 2004 Subaru Baja keys in South Gate
- 2004 Subaru Baja keys in Cudahy
- 2004 Subaru Baja keys in Athens
- 2004 Subaru Baja keys in Gardena
- 2004 Subaru Baja keys in Westmont
- 2004 Subaru Baja keys in Carson
- 2004 Subaru Baja keys in Lakewood
- 2004 Subaru Baja keys in Downey
- 2004 Subaru Baja keys in Huntington Park
2004 Subaru Baja key replacement in Compton: frequently asked questions
Does a 2004 Subaru Baja key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2004 Subaru Baja key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Subaru key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does my older Subaru have a chip key?
Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.
Do I need to bring all my Subaru keys for programming?
Yes. Keys are registered as a set, and any key not present will stop starting the car.
Does car insurance cover a replacement Subaru key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How much does a 2004 Subaru Baja key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do I have to tow my 2004 Subaru Baja to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you program a key I bought online for my 2004 Subaru Baja?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you make a key for a 2004 Subaru Baja if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Which parts of Compton do you serve?
All of Compton, including Richland Farms, Sunny Cove, Downtown Compton, and the Rosecrans corridor, and addresses in ZIP codes 90220, 90221, and 90222.
Are you open 24 hours in Compton?
Yes. We take calls and dispatch to Compton 24 hours a day, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
