Quick answer
The 1999 Subaru Legacy typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1999 Subaru Legacy keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1999 Subaru Legacy
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1999 Subaru Legacy use?
- How we make a 1999 Subaru Legacy key
- How Subaru key and immobilizer systems work
- Common Subaru key and lock problems
- All keys lost or just need a spare?
- Stranded with your Subaru right now?
- 1999 Subaru Legacy key replacement across Compton
- Getting a 1999 Subaru Legacy key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Subaru key?
- What affects the cost of a 1999 Subaru Legacy key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Compton choose Big Daddy
- Looking after your Subaru key
- Choosing a car locksmith you can trust
- Other Subaru Legacy years
- Other Subaru models
- Related automotive locksmith services in Compton
- 1999 Subaru Legacy keys near Compton
- 1999 Subaru Legacy key replacement in Compton: frequently asked questions
What kind of key does a 1999 Subaru Legacy use?
The 1999 Subaru Legacy typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1999 Subaru Legacy key
For the 1999 Subaru Legacy we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1999 model year. For other years, see the Subaru Legacy key replacement overview, or browse all Subaru models.
How Subaru key and immobilizer systems work
Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.
Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.
Common Subaru key and lock problems
These are the issues we see most often on Subaru vehicles in Compton:
- Lost keys on vehicles where every key is registered at once
- Remote-head keys with failed buttons
- Proximity fobs not detected after battery replacement
- Uncertainty about whether older Imprezas and Foresters have a chip
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Subaru right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1999 Subaru Legacy key replacement across Compton
Compton is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Customers anywhere in Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90220, 90221, and 90222.
Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.
People call us from all over Compton, including the areas around Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, and Gateway Towne Center. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Compton by SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1999 Subaru Legacy key made, step by step
Call with the year, make and model
Tell us you need a key for a 1999 Subaru Legacy, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Subaru key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1999 Subaru Legacy key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
- A used car was sold with one worn key and no spare.
- The ignition will not turn and the key will not come out.
Why drivers in Compton choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Compton.

Looking after your Subaru key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other Subaru Legacy years
- 2025 Legacy
- 2024 Legacy
- 2023 Legacy
- 2022 Legacy
- 2021 Legacy
- 2020 Legacy
- 2019 Legacy
- 2018 Legacy
- 2017 Legacy
- 2016 Legacy
- 2015 Legacy
- 2014 Legacy
- 2013 Legacy
- 2012 Legacy
- 2011 Legacy
- 2010 Legacy
- 2009 Legacy
- 2008 Legacy
- 2007 Legacy
- 2006 Legacy
- 2005 Legacy
- 2004 Legacy
- 2003 Legacy
- 2002 Legacy
- 2001 Legacy
- 2000 Legacy
- 1998 Legacy
- 1997 Legacy
- 1996 Legacy
- 1995 Legacy
- 1994 Legacy
- 1993 Legacy
- 1992 Legacy
- 1991 Legacy
- 1990 Legacy
Other Subaru models
- Subaru Impreza keys
- Subaru Outback keys
- Subaru Forester keys
- Subaru WRX keys
- Subaru BRZ keys
- Subaru Crosstrek keys
- Subaru Tribeca keys
- Subaru Ascent keys
- Subaru Baja keys
- Subaru Solterra keys
Related automotive locksmith services in Compton
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
1999 Subaru Legacy keys near Compton
We make 1999 Subaru Legacy keys in the communities around Compton as well. See the main 1999 Subaru Legacy key replacement page or the Compton locksmith page.
- 1999 Subaru Legacy keys in Lynwood
- 1999 Subaru Legacy keys in Willowbrook
- 1999 Subaru Legacy keys in Paramount
- 1999 Subaru Legacy keys in South Gate
- 1999 Subaru Legacy keys in Cudahy
- 1999 Subaru Legacy keys in Athens
- 1999 Subaru Legacy keys in Gardena
- 1999 Subaru Legacy keys in Westmont
- 1999 Subaru Legacy keys in Carson
- 1999 Subaru Legacy keys in Lakewood
- 1999 Subaru Legacy keys in Downey
- 1999 Subaru Legacy keys in Huntington Park
1999 Subaru Legacy key replacement in Compton: frequently asked questions
Does a 1999 Subaru Legacy key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1999 Subaru Legacy key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Subaru key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does my older Subaru have a chip key?
Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.
Do I need to bring all my Subaru keys for programming?
Yes. Keys are registered as a set, and any key not present will stop starting the car.
Do I have to tow my 1999 Subaru Legacy to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a 1999 Subaru Legacy key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you program a key I bought online for my 1999 Subaru Legacy?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Is a locksmith-made Subaru key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1999 Subaru Legacy if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Is there a travel charge for Compton?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Compton, so you know the cost in advance.
How long does it take a locksmith to reach me in Compton?
It depends on where the nearest technician is and on traffic along SR-91, I-710, or I-105. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
