Quick answer
Deadbolt Installation: Installing single-cylinder, double-cylinder, high-security or smart deadbolts. Big Daddy Car Key Replacement provides deadbolt installation service in Compton as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Installation
- Area
- Compton, Los Angeles County, CA (90220, 90221, 90222)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our deadbolt installation service
- Who we help in Compton
- Signs you need deadbolt installation service
- Deadbolt Installation across Compton
- What happens when you call
- Typical calls we receive
- Equipment and hardware on the van
- Terms worth knowing
- What affects the cost of deadbolt installation service
- Why Compton customers choose Big Daddy
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- What to have ready when you call
- After the visit
- Related locksmith services in Compton
- Deadbolt Installation near Compton
- Deadbolt Installation in Compton: frequently asked questions
About our deadbolt installation service
Installing single-cylinder, double-cylinder, high-security or smart deadbolts. A deadbolt is the lock that actually resists force, because its bolt cannot be pushed back with a card or pried like a spring latch. We install single-cylinder deadbolts with an inside thumbturn, double-cylinder models where glass is near the lock, and keypad or smart versions, each with a reinforced strike anchored into the wall stud.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our deadbolt installation service in Compton is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Who we help in Compton
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Compton. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Compton.
Signs you need deadbolt installation service
If any of the following sounds familiar, deadbolt installation service is likely what you need:
- Your door only has a locking knob
- The existing deadbolt has a short or wobbly bolt
- There is glass within reach of the thumbturn
- You want keyless entry on the main door
Deadbolt Installation across Compton
Located in Los Angeles County, Compton is an incorporated city within our Gateway Cities service area. We cover every part of Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 90220, 90221, and 90222.
Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.
If you are out and about near Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, or Gateway Towne Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Compton follows SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. You get a realistic arrival estimate when you call.
What happens when you call
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- Each door in the house takes a different key and the ring keeps growing.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A handbag with house keys and a driver’s license was stolen from a car.
- A roommate, partner or tenant has moved out and still has a key.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- An older parent is having trouble with a round knob and needs lever handles.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Keyed alike
- Several locks set to operate with the same key.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
What affects the cost of deadbolt installation service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Compton customers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Compton.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Practical advice from our locksmiths
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
Doing it yourself versus calling a professional
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Compton
Customers who need deadbolt installation service often ask about these as well. Each can usually be handled in the same visit to Compton.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Eviction Locksmith Service
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
Deadbolt Installation near Compton
We provide the same deadbolt installation service in the communities around Compton. See the main deadbolt installation page or the full list of service areas.
- Deadbolt Installation in Lynwood
- Deadbolt Installation in Willowbrook
- Deadbolt Installation in Paramount
- Deadbolt Installation in South Gate
- Deadbolt Installation in Cudahy
- Deadbolt Installation in Athens
- Deadbolt Installation in Gardena
- Deadbolt Installation in Westmont
- Deadbolt Installation in Carson
- Deadbolt Installation in Lakewood
- Deadbolt Installation in Downey
- Deadbolt Installation in Huntington Park
Deadbolt Installation in Compton: frequently asked questions
Should I get a single or double cylinder deadbolt?
Single-cylinder deadbolts use a key outside and a thumbturn inside and suit most doors. Double-cylinder deadbolts need a key on both sides, which helps when glass is nearby but can slow an emergency exit, so check local code and keep a key close.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Should I rekey or replace the locks in my Compton home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Is there a travel charge for Compton?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Compton, so you know the cost in advance.
Are you open 24 hours in Compton?
Yes. We take calls and dispatch to Compton 24 hours a day, including weekends and holidays.
Can you make car keys in Compton?
Yes. We cut and program car keys on site anywhere in Compton, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
