Quick answer
Commercial Locksmith: Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings. Big Daddy Car Key Replacement provides commercial locksmith service in Culver City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Locksmith
- Area
- Culver City, Los Angeles County, CA (90230, 90232)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial locksmith involves
- Who we help in Culver City
- When you need commercial locksmith service
- Commercial Locksmith across Culver City
- Our commercial locksmith process, step by step
- Common situations in Culver City
- Equipment and hardware on the van
- A short glossary
- How commercial locksmith service is priced
- Why Culver City customers choose Big Daddy
- Tips to avoid problems
- Why this is a job for a locksmith
- What we commit to
- How to choose a locksmith you can trust
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Culver City
- Commercial Locksmith near Culver City
- Commercial Locksmith in Culver City: frequently asked questions
What commercial locksmith involves
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings. Commercial locksmithing covers hardware built for heavy use and for code: Grade 1 lever locks, mortise locks, storefront deadlatches, exit devices, door closers, master key systems and electronic access. The goal is doors that lock reliably, let people out safely, and give the right people the right level of access.

Every business in Culver City eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial locksmith service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Culver City
Our commercial customers in Culver City include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
Our full list of locksmith services shows everything we offer, and the Culver City locksmith page covers local details.
When you need commercial locksmith service
People in Culver City usually call us for commercial locksmith service in situations like these:
- Employees with keys have left the company
- A door fails to latch or lock at closing
- You are opening a new location or build-out
- An inspector flagged an exit door
Commercial Locksmith across Culver City
Located in Los Angeles County, Culver City is an incorporated city within our Westside service area. Customers anywhere in Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, Carlson Park, Blair Hills, and Sunkist Park, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90230 and 90232.
Culver City has become a studio and tech hub, with creative offices in the Hayden Tract, condos in Fox Hills and 1940s cottages, driving demand for access control alongside ordinary home rekeys.
If you are out and about near Sony Pictures Studios, The Culver Studios, the Culver Hotel, Baldwin Hills Scenic Overlook, or Westfield Culver City, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Culver City by I-405, I-10, SR-90, Washington Boulevard, Culver Boulevard, and Venice Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our commercial locksmith process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Culver City
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The back door shows pry marks around the latch after the weekend.
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
How commercial locksmith service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Culver City customers choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Culver City.

Tips to avoid problems
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Consider keypad or card access for doors with frequent staff turnover.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Culver City
Customers who need commercial locksmith service often ask about these as well. Each can usually be handled in the same visit to Culver City.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
Commercial Locksmith near Culver City
We provide the same commercial locksmith service in the communities around Culver City. See the main commercial locksmith page or the full list of service areas.
- Commercial Locksmith in Ladera Heights
- Commercial Locksmith in View Park–Windsor Hills
- Commercial Locksmith in Beverly Hills
- Commercial Locksmith in Marina del Rey
- Commercial Locksmith in Inglewood
- Commercial Locksmith in West Hollywood
- Commercial Locksmith in Santa Monica
- Commercial Locksmith in El Segundo
- Commercial Locksmith in Hawthorne
- Commercial Locksmith in Westmont
- Commercial Locksmith in Studio City
- Commercial Locksmith in Athens
Commercial Locksmith in Culver City: frequently asked questions
What is the difference between commercial and residential locks?
Commercial locks are built to ANSI/BHMA Grade 1 or 2 for hundreds of thousands of cycles, fit thicker doors and metal frames, and must meet fire and egress codes. Residential hardware is lighter and will fail quickly on a busy business door.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you work outside our business hours in Culver City?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Which parts of Culver City do you serve?
All of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, and Carlson Park, and addresses in ZIP codes 90230 and 90232.
Can you make car keys in Culver City?
Yes. We cut and program car keys on site anywhere in Culver City, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Culver City?
Yes. We take calls and dispatch to Culver City 24 hours a day, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
