Quick answer
Condo Locksmith Service: Lock services for condo units, shared entries, storage rooms and garage access doors. Big Daddy Car Key Replacement provides condo locksmith service in Culver City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Condo Locksmith Service
- Area
- Culver City, Los Angeles County, CA (90230, 90232)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What condo locksmith service means
- Who we help in Culver City
- When you need condo locksmith service
- Condo Locksmith Service across Culver City
- What happens when you call
- Common situations in Culver City
- What our technicians bring
- A short glossary
- What affects the cost of condo locksmith service
- What you can expect from us
- Tips to avoid problems
- Professional service compared with doing it yourself
- How we work on every job
- Questions to ask any locksmith
- What to have ready when you call
- After the visit
- Related locksmith services in Culver City
- Condo Locksmith Service near Culver City
- Condo Locksmith Service in Culver City: frequently asked questions
What condo locksmith service means
Lock services for condo units, shared entries, storage rooms and garage access doors. Condo owners control their unit door but share lobbies, garages, storage cages and mail rooms with the HOA. We service unit locks freely, coordinate with the association for common-area hardware, and follow HOA rules on finishes and door modifications, which often restrict what can be changed on the corridor side.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our condo locksmith service in Culver City is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Who we help in Culver City
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Culver City. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Culver City.
When you need condo locksmith service
People in Culver City usually call us for condo locksmith service in situations like these:
- You bought a condo and want it rekeyed
- The HOA requires a specific lock finish
- Your storage cage or mailbox key is missing
- The unit door closer or latch is failing
Condo Locksmith Service across Culver City
Culver City is an incorporated city in Los Angeles County, part of the Westside area we cover every day. We cover every part of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, Carlson Park, Blair Hills, and Sunkist Park. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90230 and 90232.
Culver City has become a studio and tech hub, with creative offices in the Hayden Tract, condos in Fox Hills and 1940s cottages, driving demand for access control alongside ordinary home rekeys.
Whether you are at home, at work, or stuck near Sony Pictures Studios, The Culver Studios, the Culver Hotel, Baldwin Hills Scenic Overlook, or Westfield Culver City, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Culver City by I-405, I-10, SR-90, Washington Boulevard, Culver Boulevard, and Venice Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Culver City
- An older parent is having trouble with a round knob and needs lever handles.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A roommate, partner or tenant has moved out and still has a key.
- A handbag with house keys and a driver’s license was stolen from a car.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- Each door in the house takes a different key and the ring keeps growing.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
A short glossary
- Keyed alike
- Several locks set to operate with the same key.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
What affects the cost of condo locksmith service
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Culver City. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Tips to avoid problems
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
Professional service compared with doing it yourself
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Culver City
Customers who need condo locksmith service often ask about these as well. Each can usually be handled in the same visit to Culver City.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Deadbolt Repair
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
Condo Locksmith Service near Culver City
We provide the same condo locksmith service in the communities around Culver City. See the main condo locksmith service page or the full list of service areas.
- Condo Locksmith Service in Ladera Heights
- Condo Locksmith Service in View Park–Windsor Hills
- Condo Locksmith Service in Beverly Hills
- Condo Locksmith Service in Marina del Rey
- Condo Locksmith Service in Inglewood
- Condo Locksmith Service in West Hollywood
- Condo Locksmith Service in Santa Monica
- Condo Locksmith Service in El Segundo
- Condo Locksmith Service in Hawthorne
- Condo Locksmith Service in Westmont
- Condo Locksmith Service in Studio City
- Condo Locksmith Service in Athens
Condo Locksmith Service in Culver City: frequently asked questions
Do I need HOA approval to change my condo lock?
Rekeying or replacing with matching hardware usually needs no approval. Changing the visible style, adding a smart lock on the corridor side, or drilling a fire-rated door often does, so check your CC&Rs first.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Should I rekey or replace the locks in my Culver City home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Is there a travel charge for Culver City?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Culver City, so you know the cost in advance.
Can you make car keys in Culver City?
Yes. We cut and program car keys on site anywhere in Culver City, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Culver City do you serve?
All of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, and Carlson Park, and addresses in ZIP codes 90230 and 90232.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
