Quick answer
Latch Guard Installation: Installing latch guards to protect against forced entry. Big Daddy Car Key Replacement provides latch guard installation service in Cypress as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Latch Guard Installation
- Area
- Cypress, Orange County, CA (90630)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- What latch guard installation means
- Who uses this service
- Reasons to call for latch guard installation service
- Latch Guard Installation across Cypress
- Our latch guard installation process, step by step
- Situations we handle regularly
- Tools, parts and hardware we carry
- Terms worth knowing
- What affects the cost of latch guard installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Cypress
- Latch Guard Installation near Cypress
- Latch Guard Installation in Cypress: frequently asked questions
What latch guard installation means
Installing latch guards to protect against forced entry. A latch guard is a steel plate that covers the gap between door and frame at the lock, so a pry bar or credit card cannot reach the latch. It is essential on out-swinging doors, where the latch is otherwise exposed, and is a standard fitting on commercial back doors.

A lock can only do its job if the door around it works. Hinges, latches, strike plates and frames move over time, and the lock is usually blamed for problems that begin elsewhere. Our latch guard installation service in Cypress looks at the whole opening and fixes the cause, so the door closes with a push and locks without force.
Who uses this service
Door hardware calls in Cypress come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Cypress.
Reasons to call for latch guard installation service
If any of the following sounds familiar, latch guard installation service is likely what you need:
- Your door swings outward
- Pry marks show at the latch
- The gap at the lock is wide enough to see the latch
- A back or side door is hidden from view
Latch Guard Installation across Cypress
Located in Orange County, Cypress is an incorporated city within our service area. We cover every part of Cypress, including the Cypress Business Park along Katella Avenue, the Cypress College area, the Lincoln Avenue corridor, the neighborhoods around Oak Knoll Park, and the Moody Street corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90630 ZIP code.
Cypress is a quiet residential city of 1960s and 1970s tract homes, with a large business park along Katella Avenue, a community college and a race course, so deadbolt upgrades and move-in rekeys share the schedule with office access control and keys for commuter cars.
If you are out and about near Cypress College, Los Alamitos Race Course, Oak Knoll Park, the Cypress Civic Center, or the Katella Avenue business parks, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Cypress follows Katella Avenue, Lincoln Avenue, Valley View Street, Ball Road, Cerritos Avenue, and Walker Street. You get a realistic arrival estimate when you call.
Our latch guard installation process, step by step
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- The back door swings outward and its latch is visible through the gap.
- The deadbolt only turns if you pull the door hard toward you.
- The door drifts open by itself because the latch no longer catches.
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- A latch has jammed and someone is stuck in a room.
Tools, parts and hardware we carry
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Terms worth knowing
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
What affects the cost of latch guard installation service
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Cypress.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Advice worth knowing
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
Doing it yourself versus calling a professional
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Cypress
Customers who need latch guard installation service often ask about these as well. Each can usually be handled in the same visit to Cypress.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
Latch Guard Installation near Cypress
We provide the same latch guard installation service in the communities around Cypress. See the main latch guard installation page or the full list of service areas.
- Latch Guard Installation in Hawaiian Gardens
- Latch Guard Installation in Stanton
- Latch Guard Installation in Cerritos
- Latch Guard Installation in Buena Park
- Latch Guard Installation in Artesia
- Latch Guard Installation in Lakewood
- Latch Guard Installation in Bellflower
- Latch Guard Installation in Garden Grove
- Latch Guard Installation in Norwalk
- Latch Guard Installation in La Mirada
- Latch Guard Installation in Anaheim
- Latch Guard Installation in Fullerton
Latch Guard Installation in Cypress: frequently asked questions
What does a latch guard do?
It shields the latch and bolt from prying and shimming by covering the gap at the door edge. On out-swinging doors it is one of the most effective low-cost security additions.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Why do I have to push my door to lock it in Cypress?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Are you open 24 hours in Cypress?
Yes. We take calls and dispatch to Cypress 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Cypress?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Cypress and the surrounding communities. All work is done at your location.
How long does it take a locksmith to reach me in Cypress?
It depends on where the nearest technician is and on traffic along Katella Avenue, Lincoln Avenue, or Valley View Street. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
