Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Diamond Bar as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Diamond Bar, Los Angeles County, CA (91765)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our electric strike installation service
- Who uses this service
- When you need electric strike installation service
- Electric Strike Installation across Diamond Bar
- What happens when you call
- Common situations in Diamond Bar
- What our technicians bring
- Terms worth knowing
- How electric strike installation service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Diamond Bar
- Electric Strike Installation near Diamond Bar
- Electric Strike Installation in Diamond Bar: frequently asked questions
About our electric strike installation service
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our electric strike installation service in Diamond Bar takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Diamond Bar range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Diamond Bar.
When you need electric strike installation service
These are the most common reasons customers in Diamond Bar ask for electric strike installation service:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Diamond Bar
Diamond Bar is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Our electric strike installation service reaches all of Diamond Bar, including The Country, Diamond Ridge, the Diamond Bar Boulevard corridor, the Grand Avenue corridor, and the Gateway Corporate Center, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91765 ZIP code.
Diamond Bar is a hillside suburb of planned neighborhoods and the guard-gated community known as The Country, where smart locks, double-door hardware and luxury vehicle keys are common requests.
People call us from all over Diamond Bar, including the areas around the Diamond Bar Center, Sycamore Canyon Park, Diamond Bar Golf Course, and Pantera Park. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Diamond Bar follows SR-57, SR-60, Diamond Bar Boulevard, Grand Avenue, Golden Springs Drive, and Brea Canyon Road. You get a realistic arrival estimate when you call.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Diamond Bar
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- An apartment building wants to replace a shared entry key with fobs.
- An office wants to stop rekeying each time an employee leaves.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
How electric strike installation service is priced
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Diamond Bar. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Diamond Bar.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Practical advice from our locksmiths
- Keep firmware up to date. Updates often fix security issues.
- Review the user list every few months and remove anyone who no longer needs access.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Delete factory default codes on the day of installation.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Diamond Bar
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Diamond Bar.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Audit Trail Lock Systems
Installing locks that track access history.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Access Code Programming
Adding, removing or changing access codes.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Key Fob Access Systems
Installing and programming key fob systems.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
Electric Strike Installation near Diamond Bar
We provide the same electric strike installation service in the communities around Diamond Bar. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Walnut
- Electric Strike Installation in Pomona
- Electric Strike Installation in San Dimas
- Electric Strike Installation in La Verne
- Electric Strike Installation in Covina
- Electric Strike Installation in Rowland Heights
- Electric Strike Installation in Claremont
- Electric Strike Installation in West Covina
- Electric Strike Installation in La Puente
- Electric Strike Installation in Glendora
- Electric Strike Installation in City of Industry
- Electric Strike Installation in Irwindale
Electric Strike Installation in Diamond Bar: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which smart lock is best for a home in Diamond Bar?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Are you open 24 hours in Diamond Bar?
Yes. We take calls and dispatch to Diamond Bar 24 hours a day, including weekends and holidays.
Which parts of Diamond Bar do you serve?
All of Diamond Bar, including The Country, Diamond Ridge, the Diamond Bar Boulevard corridor, and the Grand Avenue corridor, and addresses in ZIP code 91765.
Do you have a locksmith shop in Diamond Bar?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Diamond Bar and the rest of the San Gabriel Valley area. All work is done at your location.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
