Quick answer
Door Closer Repair: Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Big Daddy Car Key Replacement provides door closer repair service in El Segundo as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Repair
- Area
- El Segundo, Los Angeles County, CA (90245)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What door closer repair means
- Who we help in El Segundo
- When you need door closer repair service
- Door Closer Repair across El Segundo
- How our door closer repair service works
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- How door closer repair service is priced
- Why El Segundo customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- Our service standards
- How to choose a locksmith you can trust
- What to have ready when you call
- Once the work is done
- Related locksmith services in El Segundo
- Door Closer Repair near El Segundo
- Door Closer Repair in El Segundo: frequently asked questions
What door closer repair means
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Most door closer complaints are adjustment problems: sweep speed, latch speed and backcheck are controlled by small valves that drift or get turned too far. Oil on the closer body or the floor, however, means the seal has failed and the closer must be replaced, since leaking units cannot be reliably rebuilt on site.

A business door has three jobs: keep the wrong people out, let everyone inside get out safely, and survive thousands of cycles a week. Our door closer repair service in El Segundo covers all three, from storefront locks and exit devices to master key systems, with work scheduled around your hours of operation.
Who we help in El Segundo
Our commercial customers in El Segundo include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in El Segundo.
When you need door closer repair service
These are the most common reasons customers in El Segundo ask for door closer repair service:
- The door slams shut
- The door closes too slowly or stops short
- Oil is leaking from the closer
- The closer arm is loose or disconnected
Door Closer Repair across El Segundo
Located in Los Angeles County, El Segundo is an incorporated city within our South Bay service area. We cover every part of El Segundo, including Downtown El Segundo, Smoky Hollow, the aerospace corridor east of Pacific Coast Highway, and the residential grid west of Main Street. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90245 ZIP code.
El Segundo is a small beach-adjacent town wrapped in aerospace and corporate campuses, where businesses ask for access control and audit-trail locks while travelers near LAX need fast car key help.
If you are out and about near Los Angeles International Airport, the Chevron El Segundo Refinery, The Point and Plaza El Segundo, or Los Angeles Air Force Base, give us that location when you call and wait somewhere safe and visible. Technicians usually reach El Segundo by I-105, I-405, Pacific Coast Highway, El Segundo Boulevard, Imperial Highway, and Rosecrans Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our door closer repair service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
How door closer repair service is priced
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why El Segundo customers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to El Segundo.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Give each employee access only to the doors their job requires.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Consider keypad or card access for doors with frequent staff turnover.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in El Segundo
Customers who need door closer repair service often ask about these as well. Each can usually be handled in the same visit to El Segundo.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
Door Closer Repair near El Segundo
We provide the same door closer repair service in the communities around El Segundo. See the main door closer repair page or the full list of service areas.
- Door Closer Repair in Manhattan Beach
- Door Closer Repair in Hawthorne
- Door Closer Repair in Hermosa Beach
- Door Closer Repair in Lawndale
- Door Closer Repair in Inglewood
- Door Closer Repair in Marina del Rey
- Door Closer Repair in Redondo Beach
- Door Closer Repair in Ladera Heights
- Door Closer Repair in Gardena
- Door Closer Repair in View Park–Windsor Hills
- Door Closer Repair in Athens
- Door Closer Repair in Westmont
Door Closer Repair in El Segundo: frequently asked questions
Can a leaking door closer be repaired?
No. Once hydraulic fluid leaks, the closer has lost its damping and should be replaced. If there is no leak, slamming or slow closing can almost always be corrected by adjusting the valves.
Can you work outside our business hours in El Segundo?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you make car keys in El Segundo?
Yes. We cut and program car keys on site anywhere in El Segundo, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in El Segundo?
Yes. We take calls and dispatch to El Segundo 24 hours a day, including weekends and holidays.
Which parts of El Segundo do you serve?
All of El Segundo, including Downtown El Segundo, Smoky Hollow, the aerospace corridor east of Pacific Coast Highway, and the residential grid west of Main Street, and addresses in ZIP code 90245.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
