Quick answer
Big Daddy Car Key Replacement cuts and programs Mitsubishi 3000GT keys on site in Encino, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Mitsubishi 3000GT
- Model years covered
- 1991–1999
- Service area
- Encino, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Mitsubishi 3000GT keys made and programmed on site
- Mitsubishi 3000GT key types by model year
- Choose your Mitsubishi 3000GT year
- Types of Mitsubishi 3000GT keys
- How Mitsubishi key and immobilizer systems work
- Common Mitsubishi key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mitsubishi right now?
- Mitsubishi 3000GT key replacement across Encino
- Getting a Mitsubishi 3000GT key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mitsubishi key?
- What affects the cost of a Mitsubishi 3000GT key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Encino choose Big Daddy
- Looking after your Mitsubishi key
- Choosing a car locksmith you can trust
- Other Mitsubishi models
- Related automotive locksmith services in Encino
- Mitsubishi 3000GT keys near Encino
- Mitsubishi 3000GT key replacement in Encino: frequently asked questions
Mitsubishi 3000GT keys made and programmed on site
The Mitsubishi 3000GT was sold in the United States for model years 1991–1999, and its key technology changed along the way. We make keys for every one of those years in Encino: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.

Mitsubishi 3000GT key types by model year
The table shows the key most Mitsubishi 3000GT models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1991–1999 | Traditional metal key | No | Edge-cut |
Choose your Mitsubishi 3000GT year
Select a model year for the exact key type, programming method and what to expect.
- 1999 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1991 Mitsubishi 3000GT
Types of Mitsubishi 3000GT keys
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Mitsubishi 3000GT we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Mitsubishi key and immobilizer systems work
Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.
Common Mitsubishi key and lock problems
These are the issues we see most often on Mitsubishi vehicles in Encino:
- Remotes that stop working while the chip still starts the car
- Lost keys on models that need a PIN for programming
- FAST-Key fobs not detected with a weak battery
- Worn ignition cylinders on older Galant and Eclipse models
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Mitsubishi right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Mitsubishi 3000GT key replacement across Encino
Encino is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our Mitsubishi key replacement service reaches all of Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 91316 and 91436.
Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.
People call us from all over Encino, including the areas around Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, and Balboa Sports Complex. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Encino follows US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue. You get a realistic arrival estimate when you call.
Getting a Mitsubishi 3000GT key made, step by step
Call with the year, make and model
Tell us you need a key for a Mitsubishi 3000GT, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mitsubishi key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Mitsubishi 3000GT key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Encino choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Encino.

Looking after your Mitsubishi key
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other Mitsubishi models
- Mitsubishi Mirage keys
- Mitsubishi Outlander keys
- Mitsubishi Eclipse keys
- Mitsubishi Galant keys
- Mitsubishi Montero keys
- Mitsubishi Lancer keys
- Mitsubishi Outlander Sport keys
- Mitsubishi Diamante keys
- Mitsubishi Eclipse Cross keys
- Mitsubishi Endeavor keys
- Mitsubishi Montero Sport keys
- Mitsubishi Raider keys
Related automotive locksmith services in Encino
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
Mitsubishi 3000GT keys near Encino
We make Mitsubishi 3000GT keys in the communities around Encino as well. See the main Mitsubishi 3000GT key replacement page or the Encino locksmith page.
- Mitsubishi 3000GT keys in Lake Balboa
- Mitsubishi 3000GT keys in Sherman Oaks
- Mitsubishi 3000GT keys in Tarzana
- Mitsubishi 3000GT keys in Reseda
- Mitsubishi 3000GT keys in Van Nuys
- Mitsubishi 3000GT keys in Valley Glen
- Mitsubishi 3000GT keys in Northridge
- Mitsubishi 3000GT keys in North Hills
- Mitsubishi 3000GT keys in Panorama City
- Mitsubishi 3000GT keys in Winnetka
- Mitsubishi 3000GT keys in Woodland Hills
- Mitsubishi 3000GT keys in Valley Village
Mitsubishi 3000GT key replacement in Encino: frequently asked questions
Can you program a key for my Mitsubishi?
Yes for most models. We cut the key, program the transponder and pair the remote on site.
Why does my Mitsubishi remote not work after the key was programmed?
The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.
Do you also repair the ignition on a Mitsubishi 3000GT?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you program a key I bought online for my Mitsubishi 3000GT?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Does car insurance cover a replacement Mitsubishi key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Can you make a key for a Mitsubishi 3000GT if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you unlock my Mitsubishi 3000GT if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do I have to tow my Mitsubishi 3000GT to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a Mitsubishi 3000GT key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Do you have a locksmith shop in Encino?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Encino and the rest of the San Fernando Valley area. All work is done at your location.
Which parts of Encino do you serve?
All of Encino, including Encino Hills, Amestoy Estates, Encino Village, and Royal Oaks, and addresses in ZIP codes 91316 and 91436.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
