Quick answer
Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in Encino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Repair
- Area
- Encino, Los Angeles County, CA (91316, 91436)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What deadbolt repair means
- Customers we serve in Encino
- Signs you need deadbolt repair service
- Deadbolt Repair across Encino
- Our deadbolt repair process, step by step
- Common situations in Encino
- Equipment and hardware on the van
- Trade terms explained
- How deadbolt repair service is priced
- What you can expect from us
- Tips to avoid problems
- Why this is a job for a locksmith
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Encino
- Deadbolt Repair near Encino
- Deadbolt Repair in Encino: frequently asked questions
What deadbolt repair means
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Your locks are only as good as their condition and the keys in circulation. Our deadbolt repair service in Encino deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Customers we serve in Encino
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Encino. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Encino.
Signs you need deadbolt repair service
If any of the following sounds familiar, deadbolt repair service is likely what you need:
- You have to push or pull the door to lock it
- The key turns but the bolt does not move
- The thumbturn is stiff or spins freely
- The deadbolt will not extend all the way
Deadbolt Repair across Encino
Encino is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our deadbolt repair service reaches all of Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 91316 and 91436.
Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.
People call us from all over Encino, including the areas around Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, and Balboa Sports Complex. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Encino follows US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue. You get a realistic arrival estimate when you call.
Our deadbolt repair process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Encino
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A roommate, partner or tenant has moved out and still has a key.
- A handbag with house keys and a driver’s license was stolen from a car.
- Each door in the house takes a different key and the ring keeps growing.
- An older parent is having trouble with a round knob and needs lever handles.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyed alike
- Several locks set to operate with the same key.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
How deadbolt repair service is priced
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Encino. The technician confirms the figure before starting.
What you can expect from us
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Encino.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Tips to avoid problems
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Encino
Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to Encino.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- Security Door Lock Service
Installing, repairing and rekeying locks for security screen doors and metal security doors.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Lock Maintenance
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Deadbolt Repair near Encino
We provide the same deadbolt repair service in the communities around Encino. See the main deadbolt repair page or the full list of service areas.
- Deadbolt Repair in Lake Balboa
- Deadbolt Repair in Sherman Oaks
- Deadbolt Repair in Tarzana
- Deadbolt Repair in Reseda
- Deadbolt Repair in Van Nuys
- Deadbolt Repair in Valley Glen
- Deadbolt Repair in Northridge
- Deadbolt Repair in North Hills
- Deadbolt Repair in Panorama City
- Deadbolt Repair in Winnetka
- Deadbolt Repair in Woodland Hills
- Deadbolt Repair in Valley Village
Deadbolt Repair in Encino: frequently asked questions
Why do I have to lift my door to lock the deadbolt?
The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Should I rekey or replace the locks in my Encino home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you have a locksmith shop in Encino?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Encino and the rest of the San Fernando Valley area. All work is done at your location.
Which parts of Encino do you serve?
All of Encino, including Encino Hills, Amestoy Estates, Encino Village, and Royal Oaks, and addresses in ZIP codes 91316 and 91436.
Can you make car keys in Encino?
Yes. We cut and program car keys on site anywhere in Encino, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
