Quick answer
Door Closer Repair: Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Big Daddy Car Key Replacement provides door closer repair service in Encino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Repair
- Area
- Encino, Los Angeles County, CA (91316, 91436)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What door closer repair involves
- Who we help in Encino
- Reasons to call for door closer repair service
- Door Closer Repair across Encino
- How our door closer repair service works
- Common situations in Encino
- Equipment and hardware on the van
- A short glossary
- Cost factors for door closer repair service
- Why call Big Daddy Car Key Replacement
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Encino
- Door Closer Repair near Encino
- Door Closer Repair in Encino: frequently asked questions
What door closer repair involves
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Most door closer complaints are adjustment problems: sweep speed, latch speed and backcheck are controlled by small valves that drift or get turned too far. Oil on the closer body or the floor, however, means the seal has failed and the closer must be replaced, since leaking units cannot be reliably rebuilt on site.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For door closer repair service in Encino, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Who we help in Encino
Our commercial customers in Encino include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Encino.
Reasons to call for door closer repair service
If any of the following sounds familiar, door closer repair service is likely what you need:
- The door slams shut
- The door closes too slowly or stops short
- Oil is leaking from the closer
- The closer arm is loose or disconnected
Door Closer Repair across Encino
Encino is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Customers anywhere in Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91316 and 91436.
Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.
If you are out and about near Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, or Balboa Sports Complex, give us that location when you call and wait somewhere safe and visible. Encino is served by US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our door closer repair service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Encino
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- The back door shows pry marks around the latch after the weekend.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Cost factors for door closer repair service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Encino. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Tips to avoid problems
- Give each employee access only to the doors their job requires.
- Consider keypad or card access for doors with frequent staff turnover.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Encino
Customers who need door closer repair service often ask about these as well. Each can usually be handled in the same visit to Encino.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
Door Closer Repair near Encino
We provide the same door closer repair service in the communities around Encino. See the main door closer repair page or the full list of service areas.
- Door Closer Repair in Lake Balboa
- Door Closer Repair in Sherman Oaks
- Door Closer Repair in Tarzana
- Door Closer Repair in Reseda
- Door Closer Repair in Van Nuys
- Door Closer Repair in Valley Glen
- Door Closer Repair in Northridge
- Door Closer Repair in North Hills
- Door Closer Repair in Panorama City
- Door Closer Repair in Winnetka
- Door Closer Repair in Woodland Hills
- Door Closer Repair in Valley Village
Door Closer Repair in Encino: frequently asked questions
Can a leaking door closer be repaired?
No. Once hydraulic fluid leaks, the closer has lost its damping and should be replaced. If there is no leak, slamming or slow closing can almost always be corrected by adjusting the valves.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you work outside our business hours in Encino?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Do you have a locksmith shop in Encino?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Encino and the rest of the San Fernando Valley area. All work is done at your location.
Are you open 24 hours in Encino?
Yes. We take calls and dispatch to Encino 24 hours a day, including weekends and holidays.
Can you make car keys in Encino?
Yes. We cut and program car keys on site anywhere in Encino, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
