Quick answer
Key Card Access Systems: Installing card reader systems for controlled entry. Big Daddy Car Key Replacement provides key card access system service in Encino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Key Card Access Systems
- Area
- Encino, Los Angeles County, CA (91316, 91436)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our key card access system service
- Who uses this service
- When you need key card access system service
- Key Card Access Systems across Encino
- Our key card access system process, step by step
- Situations we handle regularly
- Tools, parts and hardware we carry
- A short glossary
- How key card access system service is priced
- What you can expect from us
- Advice worth knowing
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Encino
- Key Card Access Systems near Encino
- Key Card Access Systems in Encino: frequently asked questions
About our key card access system service
Installing card reader systems for controlled entry. Card systems issue each person a credential that can be printed as a photo ID badge. We install readers and controllers, recommend encrypted smart-card formats over older 125 kHz proximity cards, which are easily cloned, and enroll your cards so they are ready on day one.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our key card access system service in Encino takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Encino range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Encino.
When you need key card access system service
These are the most common reasons customers in Encino ask for key card access system service:
- Staff already wear ID badges
- You want one card for several doors
- Old proximity cards are a cloning risk
- Visitors and contractors need temporary cards
Key Card Access Systems across Encino
Located in Los Angeles County, Encino is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Customers anywhere in Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91316 and 91436.
Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.
People call us from all over Encino, including the areas around Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, and Balboa Sports Complex. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Encino follows US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue. You get a realistic arrival estimate when you call.
Our key card access system process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- An office wants to stop rekeying each time an employee leaves.
- A short-term rental needs a new code for every guest.
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
- A business needs to know who entered the stockroom and when.
- Children get home from school before their parents and keep losing keys.
- A homeowner wants to let a contractor in while at work.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Audit trail
- A stored record of which credential opened a door and when.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
How key card access system service is priced
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Advice worth knowing
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Review the user list every few months and remove anyone who no longer needs access.
- Turn on two-factor authentication for any account that can unlock your door.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Delete factory default codes on the day of installation.
- Give each person their own code or credential so access can be removed individually.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Encino
Customers who need key card access system service often ask about these as well. Each can usually be handled in the same visit to Encino.
- Audit Trail Lock Systems
Installing locks that track access history.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Key Fob Access Systems
Installing and programming key fob systems.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
Key Card Access Systems near Encino
We provide the same key card access system service in the communities around Encino. See the main key card access systems page or the full list of service areas.
- Key Card Access Systems in Lake Balboa
- Key Card Access Systems in Sherman Oaks
- Key Card Access Systems in Tarzana
- Key Card Access Systems in Reseda
- Key Card Access Systems in Van Nuys
- Key Card Access Systems in Valley Glen
- Key Card Access Systems in Northridge
- Key Card Access Systems in North Hills
- Key Card Access Systems in Panorama City
- Key Card Access Systems in Winnetka
- Key Card Access Systems in Woodland Hills
- Key Card Access Systems in Valley Village
Key Card Access Systems in Encino: frequently asked questions
Are key cards more secure than keys?
Yes, when encrypted cards are used. A lost card is deleted in seconds, access can be limited by door and time, and every use is logged, none of which is possible with a metal key.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Which smart lock is best for a home in Encino?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you make car keys in Encino?
Yes. We cut and program car keys on site anywhere in Encino, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Encino?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Encino, so you know the cost in advance.
Are you open 24 hours in Encino?
Yes. We take calls and dispatch to Encino 24 hours a day, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
