Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Latch Guard Installation in Encino, CA

Need latch guard installation service in Encino? Big Daddy Car Key Replacement sends a mobile locksmith to your home, business or vehicle, 24 hours a day. Installing latch guards to protect against forced entry.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Latch Guard Installation in Encino, CA by Big Daddy Car Key Replacement

Quick answer

Latch Guard Installation: Installing latch guards to protect against forced entry. Big Daddy Car Key Replacement provides latch guard installation service in Encino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Latch Guard Installation
Area
Encino, Los Angeles County, CA (91316, 91436)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our latch guard installation service

Installing latch guards to protect against forced entry. A latch guard is a steel plate that covers the gap between door and frame at the lock, so a pry bar or credit card cannot reach the latch. It is essential on out-swinging doors, where the latch is otherwise exposed, and is a standard fitting on commercial back doors.

Latch Guard Installation in Encino, CA by Big Daddy Car Key Replacement
Latch Guard Installation in Encino: mobile service, carried out at your location.

A lock can only do its job if the door around it works. Hinges, latches, strike plates and frames move over time, and the lock is usually blamed for problems that begin elsewhere. Our latch guard installation service in Encino looks at the whole opening and fixes the cause, so the door closes with a push and locks without force.

Customers we serve in Encino

Door hardware calls in Encino come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Encino.

Signs you need latch guard installation service

People in Encino usually call us for latch guard installation service in situations like these:

  • Your door swings outward
  • Pry marks show at the latch
  • The gap at the lock is wide enough to see the latch
  • A back or side door is hidden from view

Latch Guard Installation across Encino

Encino is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our latch guard installation service reaches all of Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 91316 and 91436.

Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.

Whether you are at home, at work, or stuck near Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, or Balboa Sports Complex, tell the dispatcher the nearest landmark and we will find you. Encino is served by US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

How our latch guard installation service works

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing latch guard installation service in Encino, California
Our technicians work from fully equipped vans throughout Encino.

Typical calls we receive

  • The door drifts open by itself because the latch no longer catches.
  • The back door swings outward and its latch is visible through the gap.
  • The deadbolt only turns if you pull the door hard toward you.
  • A latch has jammed and someone is stuck in a room.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • A previous break-in left the jamb cracked around the strike.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Terms worth knowing

Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Strike plate
The plate on the frame that receives the latch or bolt.

Cost factors for latch guard installation service

Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Number of doors
Several doors in one visit cost less per door than separate calls.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Encino. The technician confirms the figure before starting.

Why call Big Daddy Car Key Replacement

Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Encino.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Door Hardware locksmith work in Encino, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Advice worth knowing

  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.

Doing it yourself versus calling a professional

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

What we commit to

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

How to choose a locksmith you can trust

  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

How to prepare for the visit

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need latch guard installation service often ask about these as well. Each can usually be handled in the same visit to Encino.

Latch Guard Installation near Encino

We provide the same latch guard installation service in the communities around Encino. See the main latch guard installation page or the full list of service areas.

Latch Guard Installation in Encino: frequently asked questions

What does a latch guard do?

It shields the latch and bolt from prying and shimming by covering the gap at the door edge. On out-swinging doors it is one of the most effective low-cost security additions.

Why do I have to push my door to lock it in Encino?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Is there a travel charge for Encino?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Encino, so you know the cost in advance.

Do you have a locksmith shop in Encino?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Encino and the rest of the San Fernando Valley area. All work is done at your location.

Which parts of Encino do you serve?

All of Encino, including Encino Hills, Amestoy Estates, Encino Village, and Royal Oaks, and addresses in ZIP codes 91316 and 91436.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Call Now (562) 550-7206Open 24 hours · mobile locksmith