Quick answer
Big Daddy Car Key Replacement cuts and programs Mercury Tracer keys on site in Fillmore, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Mercury Tracer
- Model years covered
- 1991–1999
- Service area
- Fillmore, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Mercury Tracer keys made and programmed on site
- Mercury Tracer key types by model year
- Choose your Mercury Tracer year
- Types of Mercury Tracer keys
- How Mercury key and immobilizer systems work
- Common Mercury key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mercury right now?
- Mercury Tracer key replacement across Fillmore
- Getting a Mercury Tracer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mercury key?
- What affects the cost of a Mercury Tracer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Fillmore choose Big Daddy
- Looking after your Mercury key
- Choosing a car locksmith you can trust
- Other Mercury models
- Related automotive locksmith services in Fillmore
- Mercury Tracer keys near Fillmore
- Mercury Tracer key replacement in Fillmore: frequently asked questions
Mercury Tracer keys made and programmed on site
The Mercury Tracer was sold in the United States for model years 1991–1999, and its key technology changed along the way. We make keys for every one of those years in Fillmore: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Mercury models are mechanical twins of Fords and use the same PATS transponder keys. Parts and key blanks remain easy to source even though the brand ended in 2011.

Mercury Tracer key types by model year
The table shows the key most Mercury Tracer models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1991–1997 | Traditional metal key | No | Edge-cut |
| 1998–1999 | Transponder chip key | Yes on most; varies by trim | Edge-cut |
Choose your Mercury Tracer year
Select a model year for the exact key type, programming method and what to expect.
- 1999 Mercury Tracer
- 1998 Mercury Tracer
- 1997 Mercury Tracer
- 1996 Mercury Tracer
- 1995 Mercury Tracer
- 1994 Mercury Tracer
- 1993 Mercury Tracer
- 1992 Mercury Tracer
- 1991 Mercury Tracer
Types of Mercury Tracer keys
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Mercury Tracer we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Mercury Tracer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Mercury key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Common Mercury key and lock problems
These are the issues we see most often on Mercury vehicles in Fillmore:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mercury right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Mercury Tracer key replacement across Fillmore
Located in Ventura County, Fillmore is an incorporated city within our service area. Customers anywhere in Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, can have a mobile technician sent directly to them. Service is available throughout ZIP code 93015.
Fillmore is a small citrus-country town in the Santa Clara River Valley with a preserved early-1900s downtown, where farm gates, packing house locks and older home hardware are typical work.
Whether you are at home, at work, or stuck near the historic Central Avenue downtown, the Fillmore train depot and Central Park, the Fillmore Fish Hatchery, or the Sespe Creek citrus groves, tell the dispatcher the nearest landmark and we will find you. Fillmore is served by SR-126, SR-23, Central Avenue, Old Telegraph Road, Sespe Avenue, and Goodenough Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a Mercury Tracer key made, step by step
Call with the year, make and model
Tell us you need a key for a Mercury Tracer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mercury key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Mercury Tracer key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- The dash reads "key not detected" and the start button does nothing.
- A hardware-store copy opens the door but the engine will not start.
- The key fob went through the washing machine.
Why drivers in Fillmore choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fillmore.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Mercury key
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
Other Mercury models
- Mercury Grand Marquis keys
- Mercury Sable keys
- Mercury Mountaineer keys
- Mercury Cougar keys
- Mercury Villager keys
- Mercury Mariner keys
- Mercury Milan keys
- Mercury Mystique keys
- Mercury Monterey keys
- Mercury Montego keys
Related automotive locksmith services in Fillmore
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
Mercury Tracer keys near Fillmore
We make Mercury Tracer keys in the communities around Fillmore as well. See the main Mercury Tracer key replacement page or the Fillmore locksmith page.
- Mercury Tracer keys in Moorpark
- Mercury Tracer keys in Santa Paula
- Mercury Tracer keys in Simi Valley
- Mercury Tracer keys in Camarillo
- Mercury Tracer keys in Thousand Oaks
- Mercury Tracer keys in Westlake Village
- Mercury Tracer keys in Ojai
- Mercury Tracer keys in Stevenson Ranch
- Mercury Tracer keys in Agoura Hills
- Mercury Tracer keys in Ventura
- Mercury Tracer keys in Valencia
- Mercury Tracer keys in Oxnard
Mercury Tracer key replacement in Fillmore: frequently asked questions
I have only one Mercury key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Mercury key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
How many keys should I have for my Mercury Tracer?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you unlock my Mercury Tracer if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do you also repair the ignition on a Mercury Tracer?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost Mercury Tracer key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
How much does a Mercury Tracer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do I have to tow my Mercury Tracer to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Does car insurance cover a replacement Mercury key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you have a locksmith shop in Fillmore?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Fillmore and the surrounding communities. All work is done at your location.
Which parts of Fillmore do you serve?
All of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, and addresses in ZIP code 93015.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
