Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2000 Nissan Quest Key Replacement in Fillmore, CA

Need a 2000 Nissan Quest key in Fillmore? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2000 Nissan Quest Key Replacement in Fillmore, CA by Big Daddy Car Key Replacement

Quick answer

The 2000 Nissan Quest typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Nissan Quest keys on site in Fillmore, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2000 Nissan Quest
Typical key
Transponder chip key
Transponder chip
Yes on most; varies by trim
Blade
Edge-cut
Programming
Required, done on site
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2000 Nissan Quest use?

The 2000 Nissan Quest typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

2000 Nissan Quest key replacement in Fillmore
Transponder chip key for a 2000 Nissan Quest, made on site in Fillmore.

How we make a 2000 Nissan Quest key

For the 2000 Nissan Quest we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.

This page covers the 2000 model year. For other years, see the Nissan Quest key replacement overview, or browse all Nissan models.

How Nissan key and immobilizer systems work

Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.

Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.

Common Nissan key and lock problems

These are the issues we see most often on Nissan vehicles in Fillmore:

  • Steering lock (ESCL) failures on some push-button models that prevent starting
  • Intelligent Keys that are not detected when the fob battery is weak
  • Twist-knob ignitions that will not turn without a recognized key
  • Body control module problems that erase programmed keys

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Nissan right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

2000 Nissan Quest key replacement across Fillmore

Located in Ventura County, Fillmore is an incorporated city within our service area. Our Nissan key replacement service reaches all of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, as well as the streets in between. You do not need to bring anything to a shop. We serve the 93015 ZIP code.

Fillmore is a small citrus-country town in the Santa Clara River Valley with a preserved early-1900s downtown, where farm gates, packing house locks and older home hardware are typical work.

Whether you are at home, at work, or stuck near the historic Central Avenue downtown, the Fillmore train depot and Central Park, the Fillmore Fish Hatchery, or the Sespe Creek citrus groves, tell the dispatcher the nearest landmark and we will find you. Fillmore is served by SR-126, SR-23, Central Avenue, Old Telegraph Road, Sespe Avenue, and Goodenough Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Getting a 2000 Nissan Quest key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2000 Nissan Quest, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2000 Nissan Quest key in Fillmore
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Nissan key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2000 Nissan Quest key

Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.

Situations we are called to most often

  • The key fob went through the washing machine.
  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The key is locked in the trunk and the trunk release is disabled.
  • The ignition will not turn and the key will not come out.

Why drivers in Fillmore choose Big Daddy

Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fillmore.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Nissan car key service in Fillmore
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Nissan key

The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.

  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

Other Nissan Quest years

Other Nissan models

2000 Nissan Quest keys near Fillmore

We make 2000 Nissan Quest keys in the communities around Fillmore as well. See the main 2000 Nissan Quest key replacement page or the Fillmore locksmith page.

2000 Nissan Quest key replacement in Fillmore: frequently asked questions

Does my 2000 Nissan Quest key have a chip?

Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.

Can I program a 2000 Nissan Quest key myself?

Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.

Why does my Nissan crank but not start with the new copy?

The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.

My Nissan says "No Key Detected". What should I do?

Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.

Do all keys have to be present when programming a Nissan?

Yes on most models. Programming re-registers every key, and any key not present is erased from the system.

Can you unlock my 2000 Nissan Quest if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Does car insurance cover a replacement Nissan key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

What do you need from me to make a 2000 Nissan Quest key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Is a locksmith-made Nissan key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

How many keys should I have for my 2000 Nissan Quest?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

How long does it take a locksmith to reach me in Fillmore?

It depends on where the nearest technician is and on traffic along SR-126, SR-23, or Central Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Do you have a locksmith shop in Fillmore?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Fillmore and the surrounding communities. All work is done at your location.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Call Now (562) 550-7206Open 24 hours · mobile locksmith