Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Deadbolt Repair in Fillmore, CA

For deadbolt repair service in Fillmore, one call brings a fully equipped mobile locksmith to your location, day or night. Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Deadbolt Repair in Fillmore, CA by Big Daddy Car Key Replacement

Quick answer

Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in Fillmore as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Deadbolt Repair
Area
Fillmore, Ventura County, CA (93015)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Residential Locksmith Services
Phone
(562) 550-7206
On this page

About our deadbolt repair service

Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Deadbolt Repair in Fillmore, CA by Big Daddy Car Key Replacement
Deadbolt Repair in Fillmore: mobile service, carried out at your location.

Homes change hands, tenants come and go, doors settle and locks wear. For deadbolt repair service in Fillmore, we bring the workshop to your driveway: rekeying kits, deadbolts, locksets, strike plates and key machines. You get a clear recommendation, a price before work begins, and locks that are tested with you before we leave.

Who uses this service

We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Fillmore. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.

This service is part of our residential locksmith services in Fillmore.

Reasons to call for deadbolt repair service

These are the most common reasons customers in Fillmore ask for deadbolt repair service:

  • You have to push or pull the door to lock it
  • The key turns but the bolt does not move
  • The thumbturn is stiff or spins freely
  • The deadbolt will not extend all the way

Deadbolt Repair across Fillmore

Fillmore is an incorporated city in Ventura County, part of the Ventura County area we cover every day. We cover every part of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 93015 ZIP code.

Fillmore is a small citrus-country town in the Santa Clara River Valley with a preserved early-1900s downtown, where farm gates, packing house locks and older home hardware are typical work.

People call us from all over Fillmore, including the areas around the historic Central Avenue downtown, the Fillmore train depot and Central Park, the Fillmore Fish Hatchery, and the Sespe Creek citrus groves. A landmark or cross street helps the technician reach you quickly. Fillmore is served by SR-126, SR-23, Central Avenue, Old Telegraph Road, Sespe Avenue, and Goodenough Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

How our deadbolt repair service works

  1. A short phone consultation

    Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.

  2. On-site inspection

    The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.

  3. Clear options and a firm price

    You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.

  4. The work is done at your door

    Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.

  5. Every lock is tested with you

    You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.

  6. Keys and advice are handed over

    You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing deadbolt repair service in Fillmore, California
Our technicians work from fully equipped vans throughout Fillmore.

Typical calls we receive

  • A roommate, partner or tenant has moved out and still has a key.
  • Each door in the house takes a different key and the ring keeps growing.
  • A handbag with house keys and a driver’s license was stolen from a car.
  • The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
  • You have just closed on a house and have no idea how many keys the previous owners handed out.
  • An older parent is having trouble with a round knob and needs lever handles.
  • A back door has only a locking knob, which can be slipped or forced in seconds.

Equipment and hardware on the van

Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.

A short glossary

ANSI/BHMA grade
A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
Backset
The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
Keyed alike
Several locks set to operate with the same key.
Rekeying
Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
Deadbolt
A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
Keyway
The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Single and double cylinder
A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
Strike plate
The metal plate on the door frame that the latch or bolt enters when the door is closed.

Cost factors for deadbolt repair service

Grade and brand of hardware
A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
Smart or electronic features
Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
Number of locks
Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
Condition of door and frame
A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
Door preparation
Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
Scheduling
Planned daytime appointments are typically priced lower than urgent late-night calls.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Fillmore. The technician confirms the figure before starting.

Why Fillmore customers choose Big Daddy

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Residential locksmith work in Fillmore, CA
Residential Locksmith Services from Big Daddy Car Key Replacement.

Practical advice from our locksmiths

  • Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
  • Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
  • Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
  • Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
  • Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
  • Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
  • Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
  • Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.

Doing it yourself versus calling a professional

Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Choosing a locksmith: a short checklist

  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

Before you call (562) 550-7206

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to Fillmore.

  • Residential Locksmith

    Complete lock and key service for houses, apartments, condos and rental properties.

  • Master Key System for Home

    Creating one key that opens multiple selected locks in a home or property.

  • Sliding Door Lock Repair

    Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.

  • Garage Door Lock Repair

    Repairing or replacing manual garage locks, side door locks and garage entry door hardware.

  • Deadbolt Installation

    Installing single-cylinder, double-cylinder, high-security or smart deadbolts.

  • Change Locks

    Swapping out the locks on your doors for new ones, with new keys, in one visit.

  • Door Handle Lock Repair

    Repairing broken, loose, jammed or malfunctioning door handles and lever locks.

  • Rekey Locks

    Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.

  • Tenant Move-Out Rekey

    Rekeying locks after tenants move out to protect property owners and new occupants.

  • Security Door Lock Service

    Installing, repairing and rekeying locks for security screen doors and metal security doors.

  • Lost Car Key Replacement

    Making a new car key when all keys are lost.

  • Access Control Installation

    Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.

  • Mailbox Lock Replacement

    Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.

  • Safe Locksmith

    Opening, repairing, servicing and changing combinations on home and business safes.

  • Master Key System

    Creating a key hierarchy where owners, managers and employees have different levels of access.

Deadbolt Repair near Fillmore

We provide the same deadbolt repair service in the communities around Fillmore. See the main deadbolt repair page or the full list of service areas.

Deadbolt Repair in Fillmore: frequently asked questions

Why do I have to lift my door to lock the deadbolt?

The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.

Can you install locks I bought myself?

Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.

How long does a typical residential job take?

A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.

Do you need to see proof that I live here?

For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.

Do you provide service for landlords and tenants?

Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.

What is the most secure type of front door lock?

A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.

Should I rekey or replace the locks in my Fillmore home?

Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.

What lock brands do you work with?

We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.

Are you open 24 hours in Fillmore?

Yes. We take calls and dispatch to Fillmore 24 hours a day, including weekends and holidays.

Do you have a locksmith shop in Fillmore?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Fillmore and the rest of the Ventura County area. All work is done at your location.

How long does it take a locksmith to reach me in Fillmore?

It depends on where the nearest technician is and on traffic along SR-126, SR-23, or Central Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith