Quick answer
IC Core Lock Systems: Installing and rekeying interchangeable core lock systems for commercial properties. Big Daddy Car Key Replacement provides IC core lock service in Fillmore as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- IC Core Lock Systems
- Area
- Fillmore, Ventura County, CA (93015)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our IC core lock service
- Who we help in Fillmore
- When you need IC core lock service
- IC Core Lock Systems across Fillmore
- What happens when you call
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- What affects the cost of IC core lock service
- Why Fillmore customers choose Big Daddy
- Advice worth knowing
- Professional service compared with doing it yourself
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Fillmore
- IC Core Lock Systems near Fillmore
- IC Core Lock Systems in Fillmore: frequently asked questions
About our IC core lock service
Installing and rekeying interchangeable core lock systems for commercial properties. Interchangeable core locks let you rekey a door in seconds: a special control key pulls the figure-eight core out and a new core drops in, with no disassembly. Schools, retail chains and property managers use them so staff can swap cores themselves after a key is lost, and send the old cores out to be repinned.

Every business in Fillmore eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our IC core lock service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Fillmore
Our commercial customers in Fillmore include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Fillmore.
When you need IC core lock service
People in Fillmore usually call us for IC core lock service in situations like these:
- You rekey often because of staff turnover
- You manage many doors across locations
- You want to rekey without a service call each time
- An existing IC system needs new cores or keys
IC Core Lock Systems across Fillmore
Fillmore is an incorporated city in Ventura County, part of the Ventura County area we cover every day. Our IC core lock service reaches all of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 93015.
Fillmore is a small citrus-country town in the Santa Clara River Valley with a preserved early-1900s downtown, where farm gates, packing house locks and older home hardware are typical work.
People call us from all over Fillmore, including the areas around the historic Central Avenue downtown, the Fillmore train depot and Central Park, the Fillmore Fish Hatchery, and the Sespe Creek citrus groves. A landmark or cross street helps the technician reach you quickly. Fillmore is served by SR-126, SR-23, Central Avenue, Old Telegraph Road, Sespe Avenue, and Goodenough Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A manager is let go and returns only some of the keys issued.
- The storefront door will not latch and the shop cannot be left for the night.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
What affects the cost of IC core lock service
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Fillmore. The technician confirms the figure before starting.
Why Fillmore customers choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fillmore.

Advice worth knowing
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Consider keypad or card access for doors with frequent staff turnover.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Fillmore
Customers who need IC core lock service often ask about these as well. Each can usually be handled in the same visit to Fillmore.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
IC Core Lock Systems near Fillmore
We provide the same IC core lock service in the communities around Fillmore. See the main IC core lock systems page or the full list of service areas.
- IC Core Lock Systems in Moorpark
- IC Core Lock Systems in Santa Paula
- IC Core Lock Systems in Simi Valley
- IC Core Lock Systems in Camarillo
- IC Core Lock Systems in Thousand Oaks
- IC Core Lock Systems in Westlake Village
- IC Core Lock Systems in Ojai
- IC Core Lock Systems in Stevenson Ranch
- IC Core Lock Systems in Agoura Hills
- IC Core Lock Systems in Ventura
- IC Core Lock Systems in Valencia
- IC Core Lock Systems in Oxnard
IC Core Lock Systems in Fillmore: frequently asked questions
What does IC core mean on a lock?
IC stands for interchangeable core. The keyed portion of the lock is a removable cartridge that a control key releases, so the lock can be rekeyed by swapping the core instead of taking the lock apart.
Can you work outside our business hours in Fillmore?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you make car keys in Fillmore?
Yes. We cut and program car keys on site anywhere in Fillmore, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Fillmore?
Yes. We take calls and dispatch to Fillmore 24 hours a day, including weekends and holidays.
Which parts of Fillmore do you serve?
All of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, and addresses in ZIP code 93015.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
