Quick answer
Keypad Lock Programming: Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Big Daddy Car Key Replacement provides keypad lock programming service in Fillmore as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keypad Lock Programming
- Area
- Fillmore, Ventura County, CA (93015)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our keypad lock programming service
- Who we help in Fillmore
- Reasons to call for keypad lock programming service
- Keypad Lock Programming across Fillmore
- What happens when you call
- Common situations in Fillmore
- What our technicians bring
- Trade terms explained
- How keypad lock programming service is priced
- Why Fillmore customers choose Big Daddy
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Fillmore
- Keypad Lock Programming near Fillmore
- Keypad Lock Programming in Fillmore: frequently asked questions
About our keypad lock programming service
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Codes should be personal and temporary where possible: one per person, removed when no longer needed. We program master and user codes, set auto-lock timing, schedule or one-time codes on models that support them, and remove any default codes that shipped with the lock.

Electronic locks replace the question "who has a key?" with a list you control. Our keypad lock programming service in Fillmore covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who we help in Fillmore
Electronic lock and access control customers in Fillmore range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Fillmore.
Reasons to call for keypad lock programming service
If any of the following sounds familiar, keypad lock programming service is likely what you need:
- You do not know the programming code
- A contractor’s code should be removed
- Everyone shares one code
- The manual is lost and settings need changing
Keypad Lock Programming across Fillmore
Located in Ventura County, Fillmore is an incorporated city within our Ventura County service area. Customers anywhere in Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, can have a mobile technician sent directly to them. That includes addresses in ZIP code 93015.
Fillmore is a small citrus-country town in the Santa Clara River Valley with a preserved early-1900s downtown, where farm gates, packing house locks and older home hardware are typical work.
If you are out and about near the historic Central Avenue downtown, the Fillmore train depot and Central Park, the Fillmore Fish Hatchery, or the Sespe Creek citrus groves, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Fillmore by SR-126, SR-23, Central Avenue, Old Telegraph Road, Sespe Avenue, and Goodenough Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Fillmore
- A smart lock reports "jammed" every evening when the door swells.
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
- A homeowner wants to let a contractor in while at work.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
How keypad lock programming service is priced
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Fillmore customers choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fillmore.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Advice worth knowing
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Delete factory default codes on the day of installation.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Review the user list every few months and remove anyone who no longer needs access.
- Turn on two-factor authentication for any account that can unlock your door.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Fillmore
Customers who need keypad lock programming service often ask about these as well. Each can usually be handled in the same visit to Fillmore.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Key Fob Access Systems
Installing and programming key fob systems.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
Keypad Lock Programming near Fillmore
We provide the same keypad lock programming service in the communities around Fillmore. See the main keypad lock programming page or the full list of service areas.
- Keypad Lock Programming in Moorpark
- Keypad Lock Programming in Santa Paula
- Keypad Lock Programming in Simi Valley
- Keypad Lock Programming in Camarillo
- Keypad Lock Programming in Thousand Oaks
- Keypad Lock Programming in Westlake Village
- Keypad Lock Programming in Ojai
- Keypad Lock Programming in Stevenson Ranch
- Keypad Lock Programming in Agoura Hills
- Keypad Lock Programming in Ventura
- Keypad Lock Programming in Valencia
- Keypad Lock Programming in Oxnard
Keypad Lock Programming in Fillmore: frequently asked questions
I lost the programming code for my keypad lock. Can it be reset?
Yes. Most keypad locks have a reset procedure from inside the door that restores factory settings, after which new master and user codes are programmed.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Which smart lock is best for a home in Fillmore?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Is there a travel charge for Fillmore?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Fillmore, so you know the cost in advance.
Do you have a locksmith shop in Fillmore?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Fillmore and the rest of the Ventura County area. All work is done at your location.
Which parts of Fillmore do you serve?
All of Fillmore, including Historic Downtown Fillmore, the Central Avenue corridor, the Sespe Creek area, and the North Fillmore neighborhoods, and addresses in ZIP code 93015.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
