Quick answer
The 1991 BMW 5 Series typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1991 BMW 5 Series keys on site in Fullerton, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1991 BMW 5 Series
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1991 BMW 5 Series use?
- How we make a 1991 BMW 5 Series key
- How BMW key and immobilizer systems work
- Common BMW key and lock problems
- All keys lost or just need a spare?
- Stranded with your BMW right now?
- 1991 BMW 5 Series key replacement across Fullerton
- Getting a 1991 BMW 5 Series key made, step by step
- What to have ready
- Mobile locksmith or dealership for a BMW key?
- What affects the cost of a 1991 BMW 5 Series key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Fullerton choose Big Daddy
- Looking after your BMW key
- Choosing a car locksmith you can trust
- Other BMW 5 Series years
- Other BMW models
- Related automotive locksmith services in Fullerton
- 1991 BMW 5 Series keys near Fullerton
- 1991 BMW 5 Series key replacement in Fullerton: frequently asked questions
What kind of key does a 1991 BMW 5 Series use?
The 1991 BMW 5 Series typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1991 BMW 5 Series key
For the 1991 BMW 5 Series we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1991 model year. For other years, see the BMW 5 Series key replacement overview, or browse all BMW models.
How BMW key and immobilizer systems work
BMW and Mini immobilizers are named for the module that holds the key data: EWS on cars from the mid-1990s, CAS from the mid-2000s, and FEM or BDC on later F- and G-series cars. Each key occupies one of a fixed number of slots and is individually encrypted to the car. Making a key means reading the module’s security data and writing a new key to a free slot.
BMW moved from EWS chip keys to the CAS slot-fob system in the mid-2000s and then to FEM and BDC modules with Comfort Access. Each generation needs different equipment, and the newest G-series cars often require a dealer-ordered key.
Common BMW key and lock problems
These are the issues we see most often on BMW vehicles in Fullerton:
- Comfort Access fobs that stop being detected as the internal battery ages
- Slot-type fobs that are not read by a worn ignition dock
- Lost keys on FEM and BDC cars, which require module programming
- G-series vehicles whose keys are dealer-order only
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your BMW right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1991 BMW 5 Series key replacement across Fullerton
Located in Orange County, Fullerton is an incorporated city within our service area. Customers anywhere in Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, the Cal State Fullerton area, the Coyote Hills area, and the Orangethorpe Avenue corridor, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 92831, 92832, 92833, and 92835.
Fullerton pairs a historic downtown and streets of pre-war bungalows with a large university, a community college and the hillside homes of Sunny Hills, so student rental lockouts, original door hardware that needs careful repair and late-night car lockouts downtown are all familiar calls.
If you are out and about near Cal State Fullerton, Fullerton College, the Fullerton Transportation Center, the Fullerton Arboretum, or the Muckenthaler Cultural Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Fullerton follows SR-91, SR-57, I-5, Harbor Boulevard, Commonwealth Avenue, and Chapman Avenue. You get a realistic arrival estimate when you call.
Getting a 1991 BMW 5 Series key made, step by step
Call with the year, make and model
Tell us you need a key for a 1991 BMW 5 Series, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a BMW key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1991 BMW 5 Series key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
Why drivers in Fullerton choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fullerton.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your BMW key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other BMW 5 Series years
- 2026 5 Series
- 2025 5 Series
- 2024 5 Series
- 2023 5 Series
- 2022 5 Series
- 2021 5 Series
- 2020 5 Series
- 2019 5 Series
- 2018 5 Series
- 2017 5 Series
- 2016 5 Series
- 2015 5 Series
- 2014 5 Series
- 2013 5 Series
- 2012 5 Series
- 2011 5 Series
- 2010 5 Series
- 2009 5 Series
- 2008 5 Series
- 2007 5 Series
- 2006 5 Series
- 2005 5 Series
- 2004 5 Series
- 2003 5 Series
- 2002 5 Series
- 2001 5 Series
- 2000 5 Series
- 1999 5 Series
- 1998 5 Series
- 1997 5 Series
- 1996 5 Series
- 1995 5 Series
- 1994 5 Series
- 1993 5 Series
- 1992 5 Series
- 1990 5 Series
Other BMW models
- BMW 3 Series keys
- BMW 7 Series keys
- BMW X5 keys
- BMW Z4 keys
- BMW X3 keys
- BMW X6 keys
- BMW 6 Series keys
- BMW 8 Series keys
- BMW X1 keys
- BMW 2 Series keys
- BMW 4 Series keys
- BMW X4 keys
- BMW X2 keys
Related automotive locksmith services in Fullerton
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
1991 BMW 5 Series keys near Fullerton
We make 1991 BMW 5 Series keys in the communities around Fullerton as well. See the main 1991 BMW 5 Series key replacement page or the Fullerton locksmith page.
- 1991 BMW 5 Series keys in Anaheim
- 1991 BMW 5 Series keys in Placentia
- 1991 BMW 5 Series keys in Buena Park
- 1991 BMW 5 Series keys in La Mirada
- 1991 BMW 5 Series keys in Stanton
- 1991 BMW 5 Series keys in La Habra Heights
- 1991 BMW 5 Series keys in Yorba Linda
- 1991 BMW 5 Series keys in Garden Grove
- 1991 BMW 5 Series keys in Orange
- 1991 BMW 5 Series keys in Rowland Heights
- 1991 BMW 5 Series keys in Cypress
- 1991 BMW 5 Series keys in Cerritos
1991 BMW 5 Series key replacement in Fullerton: frequently asked questions
Does a 1991 BMW 5 Series key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1991 BMW 5 Series key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My BMW key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can a locksmith make a BMW key without the dealer?
For most EWS, CAS and FEM/BDC vehicles, yes. We read the security data and program a new key on site. The newest systems are restricted to dealer-supplied keys.
How many keys can a BMW have?
Typically up to ten key slots exist per car. A lost key’s slot can be disabled so it will no longer start the engine.
What do you need from me to make a 1991 BMW 5 Series key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do I have to tow my 1991 BMW 5 Series to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
How many keys should I have for my 1991 BMW 5 Series?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
How much does a 1991 BMW 5 Series key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you make a key for a 1991 BMW 5 Series if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you make car keys in Fullerton?
Yes. We cut and program car keys on site anywhere in Fullerton, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Fullerton?
It depends on where the nearest technician is and on traffic along SR-91, SR-57, or I-5. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
