Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1990 Mitsubishi Eclipse Key Replacement in Fullerton, CA

Lost or broken 1990 Mitsubishi Eclipse key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle in Fullerton, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1990 Mitsubishi Eclipse Key Replacement in Fullerton, CA by Big Daddy Car Key Replacement

Quick answer

The 1990 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 Mitsubishi Eclipse keys on site in Fullerton, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1990 Mitsubishi Eclipse
Typical key
Traditional metal key
Transponder chip
No
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1990 Mitsubishi Eclipse use?

The 1990 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

1990 Mitsubishi Eclipse key replacement in Fullerton
Traditional metal key for a 1990 Mitsubishi Eclipse, made on site in Fullerton.

How we make a 1990 Mitsubishi Eclipse key

For the 1990 Mitsubishi Eclipse we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 1990 model year. For other years, see the Mitsubishi Eclipse key replacement overview, or browse all Mitsubishi models.

How Mitsubishi key and immobilizer systems work

Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.

Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.

Common Mitsubishi key and lock problems

These are the issues we see most often on Mitsubishi vehicles in Fullerton:

  • Remotes that stop working while the chip still starts the car
  • Lost keys on models that need a PIN for programming
  • FAST-Key fobs not detected with a weak battery
  • Worn ignition cylinders on older Galant and Eclipse models

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Mitsubishi right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

1990 Mitsubishi Eclipse key replacement across Fullerton

Located in Orange County, Fullerton is an incorporated city within our service area. Customers anywhere in Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, the Cal State Fullerton area, the Coyote Hills area, and the Orangethorpe Avenue corridor, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 92831, 92832, 92833, and 92835.

Fullerton pairs a historic downtown and streets of pre-war bungalows with a large university, a community college and the hillside homes of Sunny Hills, so student rental lockouts, original door hardware that needs careful repair and late-night car lockouts downtown are all familiar calls.

If you are out and about near Cal State Fullerton, Fullerton College, the Fullerton Transportation Center, the Fullerton Arboretum, or the Muckenthaler Cultural Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Fullerton follows SR-91, SR-57, I-5, Harbor Boulevard, Commonwealth Avenue, and Chapman Avenue. You get a realistic arrival estimate when you call.

Getting a 1990 Mitsubishi Eclipse key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1990 Mitsubishi Eclipse, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1990 Mitsubishi Eclipse key in Fullerton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Mitsubishi key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1990 Mitsubishi Eclipse key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.
  • A used car was sold with one worn key and no spare.
  • The ignition will not turn and the key will not come out.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.

Why drivers in Fullerton choose Big Daddy

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fullerton.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Mitsubishi car key service in Fullerton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Mitsubishi key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.

Choosing a car locksmith you can trust

  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Mitsubishi Eclipse years

Other Mitsubishi models

1990 Mitsubishi Eclipse keys near Fullerton

We make 1990 Mitsubishi Eclipse keys in the communities around Fullerton as well. See the main 1990 Mitsubishi Eclipse key replacement page or the Fullerton locksmith page.

1990 Mitsubishi Eclipse key replacement in Fullerton: frequently asked questions

Does a 1990 Mitsubishi Eclipse key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 1990 Mitsubishi Eclipse key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Mitsubishi key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Can you program a key for my Mitsubishi?

Yes for most models. We cut the key, program the transponder and pair the remote on site.

Why does my Mitsubishi remote not work after the key was programmed?

The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.

Can you make a key for a 1990 Mitsubishi Eclipse if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Is a locksmith-made Mitsubishi key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Do you also repair the ignition on a 1990 Mitsubishi Eclipse?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

How many keys should I have for my 1990 Mitsubishi Eclipse?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Can you program a key I bought online for my 1990 Mitsubishi Eclipse?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Can you make car keys in Fullerton?

Yes. We cut and program car keys on site anywhere in Fullerton, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

How long does it take a locksmith to reach me in Fullerton?

It depends on where the nearest technician is and on traffic along SR-91, SR-57, or I-5. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Call Now (562) 550-7206Open 24 hours · mobile locksmith