Quick answer
Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Fullerton as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Installation
- Area
- Fullerton, Orange County, CA (92831, 92832, 92833, 92835)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What lock installation means
- Customers we serve in Fullerton
- Signs you need lock installation service
- Lock Installation across Fullerton
- Our lock installation process, step by step
- Situations we handle regularly
- What our technicians bring
- Trade terms explained
- Cost factors for lock installation service
- What you can expect from us
- Tips to avoid problems
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Fullerton
- Lock Installation near Fullerton
- Lock Installation in Fullerton: frequently asked questions
What lock installation means
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our lock installation service in Fullerton is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Customers we serve in Fullerton
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Fullerton. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Fullerton.
Signs you need lock installation service
If any of the following sounds familiar, lock installation service is likely what you need:
- A door has a knob but no deadbolt
- You added a home office or rental unit
- A new or replacement door arrived without hardware
- A garage entry or side door has no lock
Lock Installation across Fullerton
Fullerton is an incorporated city in Orange County, part of the area we cover every day. We cover every part of Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, the Cal State Fullerton area, the Coyote Hills area, and the Orangethorpe Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 92831, 92832, 92833, and 92835 ZIP codes.
Fullerton pairs a historic downtown and streets of pre-war bungalows with a large university, a community college and the hillside homes of Sunny Hills, so student rental lockouts, original door hardware that needs careful repair and late-night car lockouts downtown are all familiar calls.
Whether you are at home, at work, or stuck near Cal State Fullerton, Fullerton College, the Fullerton Transportation Center, the Fullerton Arboretum, or the Muckenthaler Cultural Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Fullerton by SR-91, SR-57, I-5, Harbor Boulevard, Commonwealth Avenue, and Chapman Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our lock installation process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- A handbag with house keys and a driver’s license was stolen from a car.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
- Each door in the house takes a different key and the ring keeps growing.
- A roommate, partner or tenant has moved out and still has a key.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Keyed alike
- Several locks set to operate with the same key.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Cost factors for lock installation service
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Fullerton. The technician confirms the figure before starting.
What you can expect from us
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fullerton.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Tips to avoid problems
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
Professional service compared with doing it yourself
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Fullerton
Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Fullerton.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Security Door Lock Service
Installing, repairing and rekeying locks for security screen doors and metal security doors.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Deadbolt Repair
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
Lock Installation near Fullerton
We provide the same lock installation service in the communities around Fullerton. See the main lock installation page or the full list of service areas.
- Lock Installation in Anaheim
- Lock Installation in Placentia
- Lock Installation in Buena Park
- Lock Installation in La Mirada
- Lock Installation in Stanton
- Lock Installation in La Habra Heights
- Lock Installation in Yorba Linda
- Lock Installation in Garden Grove
- Lock Installation in Orange
- Lock Installation in Rowland Heights
- Lock Installation in Cypress
- Lock Installation in Cerritos
Lock Installation in Fullerton: frequently asked questions
Can you install a lock on a door that has never had one?
Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Should I rekey or replace the locks in my Fullerton home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you have a locksmith shop in Fullerton?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Fullerton and the surrounding communities. All work is done at your location.
Is there a travel charge for Fullerton?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Fullerton, so you know the cost in advance.
Which parts of Fullerton do you serve?
All of Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, and the Cal State Fullerton area, and addresses in ZIP codes 92831, 92832, 92833, and 92835.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
