Quick answer
Magnetic Lock Installation: Installing maglocks for controlled entry doors. Big Daddy Car Key Replacement provides magnetic lock installation service in Glendora as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Magnetic Lock Installation
- Area
- Glendora, Los Angeles County, CA (91740, 91741)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our magnetic lock installation service
- Who we help in Glendora
- Reasons to call for magnetic lock installation service
- Magnetic Lock Installation across Glendora
- Our magnetic lock installation process, step by step
- Situations we handle regularly
- Equipment and hardware on the van
- Terms worth knowing
- How magnetic lock installation service is priced
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- How we work on every job
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Glendora
- Magnetic Lock Installation near Glendora
- Magnetic Lock Installation in Glendora: frequently asked questions
About our magnetic lock installation service
Installing maglocks for controlled entry doors. A maglock holds a door with an electromagnet, commonly rated at 600 or 1,200 pounds, and releases when power is cut. Because it is fail-safe, code requires reliable ways to get out: typically a motion sensor and a push-to-exit button, plus release on fire alarm. We install maglocks with the required egress devices.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our magnetic lock installation service in Glendora takes care of each part and shows you how to use it.
Who we help in Glendora
Electronic lock and access control customers in Glendora range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Glendora.
Reasons to call for magnetic lock installation service
These are the most common reasons customers in Glendora ask for magnetic lock installation service:
- A glass or aluminum door has no room for a strike
- A gate needs electric locking
- You need a door that releases on fire alarm
- An existing maglock no longer holds
Magnetic Lock Installation across Glendora
Glendora is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Our magnetic lock installation service reaches all of Glendora, including Glendora Village, North Glendora, the Route 66 corridor, the Lone Hill area, and Morgan Ranch, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91740 and 91741 ZIP codes.
Glendora, the “Pride of the Foothills,” has a charming village downtown and large homes on the slopes above, where homeowners value tidy workmanship on deadbolts, gates and keyless entry.
Whether you are at home, at work, or stuck near Glendora Village, Citrus College, Rubel Castle, Glendora Mountain Road, or Louie Pompei Memorial Sports Park, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Glendora follows I-210, SR-57, Route 66, Grand Avenue, Glendora Avenue, and Lone Hill Avenue. You get a realistic arrival estimate when you call.
Our magnetic lock installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- An office wants to stop rekeying each time an employee leaves.
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- A homeowner wants to let a contractor in while at work.
- A smart lock reports "jammed" every evening when the door swells.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Audit trail
- A stored record of which credential opened a door and when.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
How magnetic lock installation service is priced
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Glendora. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Advice worth knowing
- Keep the mechanical override key somewhere accessible outside the locked area.
- Keep firmware up to date. Updates often fix security issues.
- Give each person their own code or credential so access can be removed individually.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Review the user list every few months and remove anyone who no longer needs access.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Delete factory default codes on the day of installation.
- Turn on two-factor authentication for any account that can unlock your door.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Glendora
Customers who need magnetic lock installation service often ask about these as well. Each can usually be handled in the same visit to Glendora.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Access Code Programming
Adding, removing or changing access codes.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
Magnetic Lock Installation near Glendora
We provide the same magnetic lock installation service in the communities around Glendora. See the main magnetic lock installation page or the full list of service areas.
- Magnetic Lock Installation in Azusa
- Magnetic Lock Installation in Covina
- Magnetic Lock Installation in San Dimas
- Magnetic Lock Installation in Irwindale
- Magnetic Lock Installation in Bradbury
- Magnetic Lock Installation in La Verne
- Magnetic Lock Installation in West Covina
- Magnetic Lock Installation in Duarte
- Magnetic Lock Installation in Baldwin Park
- Magnetic Lock Installation in Monrovia
- Magnetic Lock Installation in Walnut
- Magnetic Lock Installation in Diamond Bar
Magnetic Lock Installation in Glendora: frequently asked questions
Do maglocks unlock when the power goes out?
Yes. Maglocks are fail-safe and release without power. A battery backup keeps the door secured during outages while still allowing people to exit.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Which smart lock is best for a home in Glendora?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Do you have a locksmith shop in Glendora?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendora and the rest of the San Gabriel Valley area. All work is done at your location.
Which parts of Glendora do you serve?
All of Glendora, including Glendora Village, North Glendora, the Route 66 corridor, and the Lone Hill area, and addresses in ZIP codes 91740 and 91741.
Is there a travel charge for Glendora?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Glendora, so you know the cost in advance.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
