Quick answer
Big Daddy Car Key Replacement cuts and programs Oldsmobile Cutlass keys on site in Granada Hills, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Oldsmobile Cutlass
- Model years covered
- 1990–1999
- Service area
- Granada Hills, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Oldsmobile Cutlass keys made and programmed on site
- Oldsmobile Cutlass key types by model year
- Choose your Oldsmobile Cutlass year
- Types of Oldsmobile Cutlass keys
- How Oldsmobile key and immobilizer systems work
- Common Oldsmobile key and lock problems
- All keys lost or just need a spare?
- Stranded with your Oldsmobile right now?
- Oldsmobile Cutlass key replacement across Granada Hills
- Getting a Oldsmobile Cutlass key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Oldsmobile key?
- What affects the cost of a Oldsmobile Cutlass key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Granada Hills choose Big Daddy
- Looking after your Oldsmobile key
- Choosing a car locksmith you can trust
- Other Oldsmobile models
- Related automotive locksmith services in Granada Hills
- Oldsmobile Cutlass keys near Granada Hills
- Oldsmobile Cutlass key replacement in Granada Hills: frequently asked questions
Oldsmobile Cutlass keys made and programmed on site
The Oldsmobile Cutlass was sold in the United States for model years 1990–1999, and its key technology changed along the way. We make keys for every one of those years in Granada Hills: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Most Oldsmobiles relied on GM’s PASS-Key resistor keys or Passlock, not a transponder chip. Blanks and resistor values are still available, so keys can be made for these cars even though the brand closed in 2004.

Oldsmobile Cutlass key types by model year
The table shows the key most Oldsmobile Cutlass models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1990–1999 | Traditional metal key | No | Edge-cut |
Choose your Oldsmobile Cutlass year
Select a model year for the exact key type, programming method and what to expect.
- 1999 Oldsmobile Cutlass
- 1998 Oldsmobile Cutlass
- 1997 Oldsmobile Cutlass
- 1996 Oldsmobile Cutlass
- 1995 Oldsmobile Cutlass
- 1994 Oldsmobile Cutlass
- 1993 Oldsmobile Cutlass
- 1992 Oldsmobile Cutlass
- 1991 Oldsmobile Cutlass
- 1990 Oldsmobile Cutlass
Types of Oldsmobile Cutlass keys
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Oldsmobile Cutlass we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Oldsmobile key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Common Oldsmobile key and lock problems
These are the issues we see most often on Oldsmobile vehicles in Granada Hills:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Oldsmobile right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Oldsmobile Cutlass key replacement across Granada Hills
Located in Los Angeles County, Granada Hills is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Customers anywhere in Granada Hills, including Old Granada Hills, Knollwood, Balboa Highlands, and the Chatsworth Street village, can have a mobile technician sent directly to them. We serve the 91344 ZIP code.
Granada Hills is known for well-kept 1950s and 1960s ranch homes, including the Balboa Highlands Eichler tract, where original door hardware often needs careful repair or period-appropriate replacement.
People call us from all over Granada Hills, including the areas around O’Melveny Park, Bee Canyon Park, Granada Hills Charter High School, and Knollwood Country Club. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Granada Hills by SR-118, I-405, I-5, Balboa Boulevard, Chatsworth Street, and Zelzah Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a Oldsmobile Cutlass key made, step by step
Call with the year, make and model
Tell us you need a key for a Oldsmobile Cutlass, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Oldsmobile key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Oldsmobile Cutlass key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
Why drivers in Granada Hills choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Oldsmobile key
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Oldsmobile models
- Oldsmobile Silhouette keys
- Oldsmobile Bravada keys
- Oldsmobile Eighty-Eight keys
- Oldsmobile Aurora keys
- Oldsmobile Alero keys
- Oldsmobile Intrigue keys
Related automotive locksmith services in Granada Hills
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
Oldsmobile Cutlass keys near Granada Hills
We make Oldsmobile Cutlass keys in the communities around Granada Hills as well. See the main Oldsmobile Cutlass key replacement page or the Granada Hills locksmith page.
- Oldsmobile Cutlass keys in Mission Hills
- Oldsmobile Cutlass keys in Porter Ranch
- Oldsmobile Cutlass keys in North Hills
- Oldsmobile Cutlass keys in Sylmar
- Oldsmobile Cutlass keys in San Fernando
- Oldsmobile Cutlass keys in Northridge
- Oldsmobile Cutlass keys in Pacoima
- Oldsmobile Cutlass keys in Arleta
- Oldsmobile Cutlass keys in Panorama City
- Oldsmobile Cutlass keys in Lake Balboa
- Oldsmobile Cutlass keys in Reseda
- Oldsmobile Cutlass keys in Chatsworth
Oldsmobile Cutlass key replacement in Granada Hills: frequently asked questions
Why is the security light flashing on my Oldsmobile and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Oldsmobile key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Can you make a key for a Oldsmobile Cutlass if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you also repair the ignition on a Oldsmobile Cutlass?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost Oldsmobile Cutlass key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you unlock my Oldsmobile Cutlass if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Is a locksmith-made Oldsmobile key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a Oldsmobile Cutlass key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
What do you need from me to make a Oldsmobile Cutlass key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Which parts of Granada Hills do you serve?
All of Granada Hills, including Old Granada Hills, Knollwood, Balboa Highlands, and the Chatsworth Street village, and addresses in ZIP code 91344.
Can you make car keys in Granada Hills?
Yes. We cut and program car keys on site anywhere in Granada Hills, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
