Quick answer
Key Fob Programming: Programming new or replacement key fobs. Big Daddy Car Key Replacement provides key fob programming service in Granada Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Key Fob Programming
- Area
- Granada Hills, Los Angeles County, CA (91344)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Automotive Locksmith Services
- Phone
- (562) 550-7206
On this page
- What key fob programming means
- Who we help in Granada Hills
- Reasons to call for key fob programming service
- Key Fob Programming across Granada Hills
- How our key fob programming service works
- Situations we handle regularly
- Equipment and hardware on the van
- Trade terms explained
- How key fob programming service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- How to choose a locksmith you can trust
- How to prepare for the visit
- After the visit
- Car keys by make in Granada Hills
- Related locksmith services in Granada Hills
- Key Fob Programming near Granada Hills
- Key Fob Programming in Granada Hills: frequently asked questions
What key fob programming means
Programming new or replacement key fobs. Fob programming pairs a remote’s rolling code with the car’s receiver. Some older vehicles allow an on-board procedure with ignition cycles; most newer ones require a diagnostic tool and a security PIN or online authorization. The fob must be the right frequency and part number, or it will never pair.

If your car will not open or will not start because of a key problem, a tow to the dealership is not the only option. For key fob programming service in Granada Hills, a mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car’s immobilizer on site.
Who we help in Granada Hills
Drivers of every kind call us in Granada Hills: commuters who have lost their only key, parents with keys locked in the car, used-car buyers who received a single worn key, rideshare and delivery drivers who cannot afford downtime, dealers and repair shops that need keys for inventory, and fleet managers keeping work vehicles on the road.
This service is part of our automotive locksmith services in Granada Hills.
Reasons to call for key fob programming service
If any of the following sounds familiar, key fob programming service is likely what you need:
- You bought a fob online and it will not pair
- A replaced battery left the remote unresponsive
- A used fob from another car needs to be tested
- The car’s remote memory needs lost fobs erased
Key Fob Programming across Granada Hills
Located in Los Angeles County, Granada Hills is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Customers anywhere in Granada Hills, including Old Granada Hills, Knollwood, Balboa Highlands, and the Chatsworth Street village, can have a mobile technician sent directly to them. That includes addresses in ZIP code 91344.
Granada Hills is known for well-kept 1950s and 1960s ranch homes, including the Balboa Highlands Eichler tract, where original door hardware often needs careful repair or period-appropriate replacement.
Whether you are at home, at work, or stuck near O’Melveny Park, Bee Canyon Park, Granada Hills Charter High School, or Knollwood Country Club, tell the dispatcher the nearest landmark and we will find you. Granada Hills is served by SR-118, I-405, I-5, Balboa Boulevard, Chatsworth Street, and Zelzah Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our key fob programming service works
Call with year, make and model
Tell us the vehicle, where it is, and whether you have any working key. With that we can identify the key type and give you a price range.
Ownership is verified
The technician checks your photo ID against the registration, title or insurance card before making a key or opening the vehicle.
The key system is identified
Using the VIN and the vehicle, we confirm the blank, the chip, the remote frequency and the programming method for your exact year and trim.
The blade is cut by code
The key is cut on a code machine to factory depths, either from the VIN-derived code or by decoding a lock, then tested in the door and ignition.
Chip and remote are programmed
We connect to the vehicle’s diagnostic port, obtain security access and register the key. Lost keys can usually be erased so they will not start the car.
Everything is tested
The engine is started several times, each remote button is checked, and existing keys are confirmed to still work before we leave.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- The ignition will not turn and the key will not come out.
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
- A hardware-store copy opens the door but the engine will not start.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
Equipment and hardware on the van
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Trade terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
How key fob programming service is priced
- Type of key
- A basic metal key costs least, then transponder keys, remote head keys and proximity smart keys, in that order.
- Whether a working key remains
- Adding a spare is cheaper and quicker than replacing keys when all are lost, which requires generating the code and security access.
- Condition of locks and ignition
- A worn ignition or a damaged door lock may need repair for the new key to operate properly.
- Year, make and model
- Some brands and model years use encrypted systems that need specialized equipment or online authorization.
- OEM or aftermarket key
- Quality aftermarket keys are less expensive where available. Some vehicles accept only manufacturer parts.
- Time and distance
- Late-night calls and long drives can affect the price. The range is given before dispatch.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Granada Hills.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Practical advice from our locksmiths
- Check whether your insurance or roadside plan covers lockouts and key replacement.
- Never store the spare inside the vehicle or in a magnetic box under it.
- Change the fob battery at the first low-battery warning.
- Learn where your fob’s emergency blade is and how to start the car with a dead fob battery.
- Keep the ignition key on a light keychain. Heavy key rings wear out ignition cylinders.
- Avoid very cheap online keys. Many have the wrong chip and cannot be programmed.
- After buying a used car, have missing keys erased from its memory.
- If a child or pet is locked in a hot car, call 911 immediately.
Why this is a job for a locksmith
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Car keys by make in Granada Hills
We cut and program keys for nearly every make on the road. Choose a make for details on its key types and immobilizer system, or see the full car key replacement directory.
- Toyota key replacement
- Honda key replacement
- Ford key replacement
- Chevrolet key replacement
- Nissan key replacement
- Hyundai key replacement
- Kia key replacement
- Jeep key replacement
- Dodge key replacement
- BMW key replacement
- Mercedes-Benz key replacement
- Lexus key replacement
- Subaru key replacement
- Mazda key replacement
- Volkswagen key replacement
- GMC key replacement
- Ram key replacement
- Audi key replacement
- Acura key replacement
- Infiniti key replacement
Related locksmith services in Granada Hills
Customers who need key fob programming service often ask about these as well. Each can usually be handled in the same visit to Granada Hills.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Spare Car Key
Creating duplicate or backup keys.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
Key Fob Programming near Granada Hills
We provide the same key fob programming service in the communities around Granada Hills. See the main key fob programming page or the full list of service areas.
- Key Fob Programming in Mission Hills
- Key Fob Programming in Porter Ranch
- Key Fob Programming in North Hills
- Key Fob Programming in Sylmar
- Key Fob Programming in San Fernando
- Key Fob Programming in Northridge
- Key Fob Programming in Pacoima
- Key Fob Programming in Arleta
- Key Fob Programming in Panorama City
- Key Fob Programming in Lake Balboa
- Key Fob Programming in Reseda
- Key Fob Programming in Chatsworth
Key Fob Programming in Granada Hills: frequently asked questions
Can a used key fob be reprogrammed to another car?
Sometimes. Many remotes can be re-paired, but a lot of smart keys lock to the first vehicle and must be unlocked or renewed first, and some cannot be reused at all. We test compatibility before charging for programming.
What do I need to show to have a key made?
A photo ID and proof of ownership such as registration, title or insurance in your name.
How long does it take?
Most keys are cut and programmed in 20 to 45 minutes once we are with the vehicle. Some systems take longer.
Can you unlock my car without damage?
Yes. We use air wedges and reach tools or pick the lock directly, which leaves no marks.
Do I need to tow my car to you?
No. We are fully mobile. The work is done at your home, workplace or wherever the car is.
Can you make a car key without the original in Granada Hills?
Yes. We cut the key from the VIN-based code or by decoding the lock, and program it to the vehicle where it is parked.
Is it cheaper than going to the dealer?
Usually, and you save the tow. Ask for a quote with your year, make and model and compare.
Will my old lost key still work?
For chip and smart keys we can usually erase lost keys from the car’s memory so they no longer start the engine.
Is there a travel charge for Granada Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Granada Hills, so you know the cost in advance.
Which parts of Granada Hills do you serve?
All of Granada Hills, including Old Granada Hills, Knollwood, Balboa Highlands, and the Chatsworth Street village, and addresses in ZIP code 91344.
Are you open 24 hours in Granada Hills?
Yes. We take calls and dispatch to Granada Hills 24 hours a day, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
