Quick answer
Mortise Lock Repair: Repairing or replacing worn, jammed or damaged mortise lock systems. Big Daddy Car Key Replacement provides mortise lock repair service in Inglewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Mortise Lock Repair
- Area
- Inglewood, Los Angeles County, CA (90301, 90302, 90303, 90304, 90305)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What mortise lock repair involves
- Customers we serve in Inglewood
- Signs you need mortise lock repair service
- Mortise Lock Repair across Inglewood
- Our mortise lock repair process, step by step
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- What affects the cost of mortise lock repair service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Inglewood
- Mortise Lock Repair near Inglewood
- Mortise Lock Repair in Inglewood: frequently asked questions
What mortise lock repair involves
Repairing or replacing worn, jammed or damaged mortise lock systems. Mortise locks are built to be rebuilt. Springs, hubs, latches and deadbolt assemblies can be replaced individually, which matters on older buildings where a new lock would not fit the existing pocket. We open the case, replace worn parts, clean and lubricate, and reset the cylinder cam and trim.

Every business in Inglewood eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our mortise lock repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Inglewood
Our commercial customers in Inglewood include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Inglewood.
Signs you need mortise lock repair service
These are the most common reasons customers in Inglewood ask for mortise lock repair service:
- The lever droops or the latch drags
- The deadbolt will not throw with the key
- The thumbturn or lever spins freely
- An antique mortise lock has stopped working
Mortise Lock Repair across Inglewood
Inglewood is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Customers anywhere in Inglewood, including Morningside Park, Downtown Inglewood, Century Heights, Fairview Heights, Lockhaven, and North Inglewood, can have a mobile technician sent directly to them. We serve the 90301, 90302, 90303, 90304, and 90305 ZIP codes.
Inglewood’s stadium district has transformed the city, bringing event-day car lockouts and new retail build-outs alongside established neighborhoods of 1920s-to-1950s homes that need rekeys and security upgrades.
If you are out and about near SoFi Stadium, the Kia Forum, Intuit Dome, Hollywood Park, or YouTube Theater, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Inglewood follows I-405, I-105, Century Boulevard, Manchester Boulevard, La Brea Avenue, and Crenshaw Boulevard. You get a realistic arrival estimate when you call.
Our mortise lock repair process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
What affects the cost of mortise lock repair service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Inglewood. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Advice worth knowing
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Give each employee access only to the doors their job requires.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Consider keypad or card access for doors with frequent staff turnover.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Store spare keys in a locked key cabinet, not a desk drawer.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Inglewood
Customers who need mortise lock repair service often ask about these as well. Each can usually be handled in the same visit to Inglewood.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
Mortise Lock Repair near Inglewood
We provide the same mortise lock repair service in the communities around Inglewood. See the main mortise lock repair page or the full list of service areas.
- Mortise Lock Repair in View Park–Windsor Hills
- Mortise Lock Repair in Ladera Heights
- Mortise Lock Repair in Hawthorne
- Mortise Lock Repair in Westmont
- Mortise Lock Repair in Athens
- Mortise Lock Repair in El Segundo
- Mortise Lock Repair in Culver City
- Mortise Lock Repair in Lawndale
- Mortise Lock Repair in Gardena
- Mortise Lock Repair in Marina del Rey
- Mortise Lock Repair in Manhattan Beach
- Mortise Lock Repair in Willowbrook
Mortise Lock Repair in Inglewood: frequently asked questions
Can an old mortise lock be repaired instead of replaced?
Very often. Most failures are a broken spring or worn hub, both replaceable. Repair keeps the original door prep and trim, which is important on historic doors where modern locks would not fit.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you work outside our business hours in Inglewood?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How long does it take a locksmith to reach me in Inglewood?
It depends on where the nearest technician is and on traffic along I-405, I-105, or Century Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Inglewood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Inglewood and the rest of the South Bay area. All work is done at your location.
Can you make car keys in Inglewood?
Yes. We cut and program car keys on site anywhere in Inglewood, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
