Quick answer
Pick-Resistant Lock Installation: Installing locks with higher resistance to picking. Big Daddy Car Key Replacement provides pick-resistant lock installation service in Inglewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Pick-Resistant Lock Installation
- Area
- Inglewood, Los Angeles County, CA (90301, 90302, 90303, 90304, 90305)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Security Upgrade Services
- Phone
- (562) 550-7206
On this page
- About our pick-resistant lock installation service
- Who uses this service
- Reasons to call for pick-resistant lock installation service
- Pick-Resistant Lock Installation across Inglewood
- Our pick-resistant lock installation process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- Cost factors for pick-resistant lock installation service
- Why call Big Daddy Car Key Replacement
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Inglewood
- Pick-Resistant Lock Installation near Inglewood
- Pick-Resistant Lock Installation in Inglewood: frequently asked questions
About our pick-resistant lock installation service
Installing locks with higher resistance to picking. Pick resistance comes from tighter manufacturing tolerances, security pins such as spools and serrated pins, restrictive keyways, and added locking elements. The more a lock has, the more skill and time picking requires. We fit pick-resistant cylinders into your existing hardware where compatible, or supply complete locks.

Whether you want the strongest practical lock on a front door or key control for an entire business, our pick-resistant lock installation service in Inglewood starts with an honest look at what you have. Call (562) 550-7206 and we will explain what matters and what does not.
Who uses this service
Security upgrades in Inglewood are requested by new homeowners, people who have experienced or witnessed a break-in, landlords meeting their obligations, and businesses responding to theft, an insurance requirement or a contract that demands key control.
This service is part of our security upgrade services in Inglewood.
Reasons to call for pick-resistant lock installation service
If any of the following sounds familiar, pick-resistant lock installation service is likely what you need:
- You want better than builder-grade cylinders
- A door is hidden from the street
- You store tools, equipment or stock
- You want an upgrade without replacing all hardware
Pick-Resistant Lock Installation across Inglewood
Located in Los Angeles County, Inglewood is an incorporated city within our South Bay service area. We cover every part of Inglewood, including Morningside Park, Downtown Inglewood, Century Heights, Fairview Heights, Lockhaven, and North Inglewood. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90301, 90302, 90303, 90304, and 90305 ZIP codes.
Inglewood’s stadium district has transformed the city, bringing event-day car lockouts and new retail build-outs alongside established neighborhoods of 1920s-to-1950s homes that need rekeys and security upgrades.
If you are out and about near SoFi Stadium, the Kia Forum, Intuit Dome, Hollywood Park, or YouTube Theater, give us that location when you call and wait somewhere safe and visible. Inglewood is served by I-405, I-105, Century Boulevard, Manchester Boulevard, La Brea Avenue, and Crenshaw Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our pick-resistant lock installation process, step by step
Understand the concern
A recent incident, an insurance request, lost keys or general unease each lead to different priorities. We start by asking what prompted the call.
Walk the entry points
Every exterior door, sliding door, gate and garage entry is checked for lock grade, bolt throw, strike and frame strength, and exposure.
Review key control
We ask who has keys, whether they can be copied freely, and whether anyone who should not have access still might.
Prioritize the recommendations
You receive a ranked list: the inexpensive fixes with the biggest effect first, then upgrades that are worthwhile but optional.
Install the upgrades
High-security cylinders, deadbolts, reinforced strikes, door wraps and latch guards are fitted, and locks are rekeyed to the new system.
Register and hand over
For restricted key systems we record the authorized signers and issue numbered keys, so every copy from then on is accounted for.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A door was kicked in once and repaired with nothing stronger than before.
- Keys have been issued for years and no one can say how many exist.
- An insurer or client contract requires documented key control.
- A neighbor was burgled through the back door and you want to check your own.
- You are away for long periods and want the house properly secured.
- You suspect someone entered without leaving any sign of force.
Tools, parts and hardware we carry
Security upgrades draw on a specific set of products: deadbolts and cylinders tested to UL 437 and the higher ANSI/BHMA grades, with hardened steel inserts, sidebars or other secondary locking and patent-protected keyways; heavy security strikes; full-length jamb reinforcement; wrap-around door plates; latch guards for out-swinging doors; hinge security studs; and secondary locks for sliding doors. We supply and install these and register key authorization for restricted systems.
A short glossary
- Hardened insert
- A piece of hardened steel placed inside a lock to stop drill bits.
- Security pins
- Specially shaped pins, such as spools, that make a lock harder to pick.
- UL 437
- A standard for key locks covering resistance to picking, drilling, prying and similar attacks.
- Patented keyway
- A key profile protected by patent, so blanks are legally restricted.
- Reinforced strike
- A heavy strike plate fastened with long screws into the wall framing.
- High-security lock
- A lock independently tested to resist picking, drilling and forcing, usually with restricted keys.
- Key control
- Knowing how many keys exist and who holds them, supported by keys that cannot be freely copied.
- Lock bumping
- Opening a pin tumbler lock with a specially cut key and a light tap.
Cost factors for pick-resistant lock installation service
- Retrofit or full replacement
- Fitting high-security cylinders into existing locks is often cheaper than replacing whole locksets.
- Commercial requirements
- Business upgrades must respect fire and egress codes, which can determine the hardware.
- Door and frame condition
- A weak door or damaged frame needs reinforcement or replacement before a strong lock can help.
- Key system
- Restricted keys cost more per key and are worth it where duplication control matters.
- Level of protection
- A reinforced strike and better deadbolt are modest in cost. UL-listed high-security locks with patented keys cost considerably more.
- Number of doors
- Most properties need the best hardware on two or three primary doors, not on every door.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Tips to avoid problems
- Do not rely on a "Do Not Duplicate" stamp for key control.
- Spend first on the frame: a reinforced strike with three-inch screws does more than an expensive lock on a weak jamb.
- Secure the back and side doors to the same standard as the front. They are attacked more often.
- A deadbolt needs a full one-inch throw and a pocket deep enough to let it extend completely.
- Trim shrubs near doors and keep entries lit. Visibility is a deterrent.
- Rekey after any loss of keys and after any change in who should have access.
- Add secondary locks and anti-lift protection to sliding doors.
- Use restricted keys if you need to know exactly how many copies exist.
Why this is a job for a locksmith
It is easy to spend money on security that does little, such as a premium lock mounted on a jamb that splits with one kick, or a restricted key system undermined by one unprotected door. A locksmith looks at the whole opening and the whole key system, puts the budget where it has the most effect, and installs hardware so that it reaches the building’s structure.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Inglewood
Customers who need pick-resistant lock installation service often ask about these as well. Each can usually be handled in the same visit to Inglewood.
- Drill-Resistant Lock Installation
Installing hardened locks and cylinders.
- Rental Property Security Upgrade
Changing locks, rekeying units, securing mailboxes and upgrading common areas.
- Anti-Bump Lock Installation
Installing locks designed to resist lock bumping.
- Lock Security Assessment
Inspecting locks, doors, frames and access points to recommend improvements.
- Reinforced Door Hardware
Installing heavy-duty hardware for better protection.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Key Control Systems
Installing lock systems that prevent unauthorized key copies.
- Commercial Security Upgrade
Improving locks, access control, exit devices and door hardware for businesses.
- Home Security Lock Upgrade
Upgrading locks to improve safety and reduce break-in risk.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
Pick-Resistant Lock Installation near Inglewood
We provide the same pick-resistant lock installation service in the communities around Inglewood. See the main pick-resistant lock installation page or the full list of service areas.
- Pick-Resistant Lock Installation in View Park–Windsor Hills
- Pick-Resistant Lock Installation in Ladera Heights
- Pick-Resistant Lock Installation in Hawthorne
- Pick-Resistant Lock Installation in Westmont
- Pick-Resistant Lock Installation in Athens
- Pick-Resistant Lock Installation in El Segundo
- Pick-Resistant Lock Installation in Culver City
- Pick-Resistant Lock Installation in Lawndale
- Pick-Resistant Lock Installation in Gardena
- Pick-Resistant Lock Installation in Marina del Rey
- Pick-Resistant Lock Installation in Manhattan Beach
- Pick-Resistant Lock Installation in Willowbrook
Pick-Resistant Lock Installation in Inglewood: frequently asked questions
Do burglars really pick locks?
Rarely compared with kicking or prying, but it does happen, and a picked lock leaves no evidence for an insurance claim. Pick-resistant cylinders close that gap and usually add key control as well.
What does UL 437 mean?
It is a standard for key locks that requires resistance to picking, drilling and other attacks for specified times. A lock with that listing has been independently tested.
Do you offer a security assessment?
Yes. We inspect doors, locks, frames and key control and give you a prioritized list of improvements.
What do the ANSI/BHMA grades mean?
They are performance ratings. Grade 1 is the highest for strength and durability, Grade 2 is solid residential quality, and Grade 3 is basic.
How do burglars usually get in?
Most often by forcing a door, kicking or prying at the latch side, or through an unlocked door or window. Reinforcing the door and frame addresses the most common method.
What is the best security upgrade for a property in Inglewood?
For most homes: a quality deadbolt with a one-inch bolt on each exterior door, reinforced strikes with long screws, and a rekey so only known keys exist. Businesses add high-security cylinders, latch guards and key control.
Will better locks lower my insurance?
Some insurers offer discounts for deadbolts and other protective devices. Ask your insurer what they recognize; we can document what was installed.
Are high-security locks worth the price?
On primary doors, yes. They resist picking, bumping and drilling, and their restricted keys cannot be copied without your authorization.
Is there a travel charge for Inglewood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Inglewood, so you know the cost in advance.
Which parts of Inglewood do you serve?
All of Inglewood, including Morningside Park, Downtown Inglewood, Century Heights, and Fairview Heights, and addresses in ZIP codes 90301, 90302, 90303, 90304, and 90305.
Can you make car keys in Inglewood?
Yes. We cut and program car keys on site anywhere in Inglewood, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
