Quick answer
The 2000 Acura Integra typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2000 Acura Integra keys on site in La Verne, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Acura Integra
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Acura Integra use?
- How we make a 2000 Acura Integra key
- How Acura key and immobilizer systems work
- Common Acura key and lock problems
- All keys lost or just need a spare?
- Stranded with your Acura right now?
- 2000 Acura Integra key replacement across La Verne
- Getting a 2000 Acura Integra key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Acura key?
- What affects the cost of a 2000 Acura Integra key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in La Verne choose Big Daddy
- Looking after your Acura key
- Choosing a car locksmith you can trust
- Other Acura Integra years
- Other Acura models
- Related automotive locksmith services in La Verne
- 2000 Acura Integra keys near La Verne
- 2000 Acura Integra key replacement in La Verne: frequently asked questions
What kind of key does a 2000 Acura Integra use?
The 2000 Acura Integra typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2000 Acura Integra key
For the 2000 Acura Integra we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2000 model year. For other years, see the Acura Integra key replacement overview, or browse all Acura models.
How Acura key and immobilizer systems work
Honda and Acura immobilizers register each key’s transponder in the engine computer or immobilizer unit. There is no owner self-programming; a diagnostic tool is always required. Most models from the early 2000s use a laser-cut blade, later ones a remote-head key, and Smart Entry proximity keys appear from the mid-2010s. When adding a key, existing keys are usually re-registered in the same session.
Acura adopted laser-cut keys and immobilizers earlier than most brands, and its Keyless Access proximity system spread across the range from the RL in 2005. Many Acura smart keys are tied to driver memory positions, so each key is numbered.
Common Acura key and lock problems
These are the issues we see most often on Acura vehicles in La Verne:
- Worn laser-cut keys that stop turning the ignition smoothly
- Ignition cylinders with sticking wafers on high-mileage Accord, Civic and CR-V models
- A flashing green key light when the chip is not recognized
- Remote-head keys with cracked cases or worn buttons
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Acura right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2000 Acura Integra key replacement across La Verne
Located in Los Angeles County, La Verne is an incorporated city within our Pomona Valley service area. Customers anywhere in La Verne, including Old Town La Verne, La Verne Heights, Marshall Canyon, Live Oak, and the Foothill Boulevard corridor, can have a mobile technician sent directly to them. We serve the 91750 ZIP code.
La Verne pairs a historic Old Town and university campus with hillside estates and mobile-home communities, so the work ranges from vintage door hardware to gate locks and student car keys.
People call us from all over La Verne, including the areas around the University of La Verne, Old Town La Verne, Brackett Field Airport, Marshall Canyon Regional Park, and the neighboring Fairplex. A landmark or cross street helps the technician reach you quickly. La Verne is served by I-210, SR-57, Foothill Boulevard, Arrow Highway, D Street, and White Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 2000 Acura Integra key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Acura Integra, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Acura key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Acura Integra key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
Why drivers in La Verne choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Looking after your Acura key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Acura Integra years
- 2026 Integra
- 2025 Integra
- 2024 Integra
- 2023 Integra
- 2001 Integra
- 1999 Integra
- 1998 Integra
- 1997 Integra
- 1996 Integra
- 1995 Integra
- 1994 Integra
- 1993 Integra
- 1992 Integra
- 1991 Integra
- 1990 Integra
Other Acura models
- Acura MDX keys
- Acura NSX keys
- Acura RDX keys
- Acura TL keys
- Acura RL keys
- Acura TLX keys
- Acura TSX keys
- Acura ILX keys
- Acura CL keys
- Acura RLX keys
- Acura ZDX keys
- Acura Legend keys
- Acura RSX keys
Related automotive locksmith services in La Verne
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Spare Car Key
Creating duplicate or backup keys.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
2000 Acura Integra keys near La Verne
We make 2000 Acura Integra keys in the communities around La Verne as well. See the main 2000 Acura Integra key replacement page or the La Verne locksmith page.
- 2000 Acura Integra keys in San Dimas
- 2000 Acura Integra keys in Claremont
- 2000 Acura Integra keys in Pomona
- 2000 Acura Integra keys in Diamond Bar
- 2000 Acura Integra keys in Glendora
- 2000 Acura Integra keys in Covina
- 2000 Acura Integra keys in Walnut
- 2000 Acura Integra keys in Azusa
- 2000 Acura Integra keys in Irwindale
- 2000 Acura Integra keys in West Covina
- 2000 Acura Integra keys in Baldwin Park
- 2000 Acura Integra keys in Rowland Heights
2000 Acura Integra key replacement in La Verne: frequently asked questions
Does my 2000 Acura Integra key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2000 Acura Integra key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Acura crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
What does the blinking green key light on my Acura dashboard mean?
The immobilizer is not recognizing the key’s transponder. The chip may be damaged, the key may be unprogrammed, or another chip key on the ring may be interfering.
Can I program a Acura key myself?
No. The immobilizer requires a diagnostic tool to register keys. Remote buttons on some older models can be paired by a manual sequence, but the chip cannot.
Can you make a key for a 2000 Acura Integra if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you unlock my 2000 Acura Integra if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
How much does a 2000 Acura Integra key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do I have to tow my 2000 Acura Integra to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
What do you need from me to make a 2000 Acura Integra key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do you have a locksmith shop in La Verne?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout La Verne and the rest of the Pomona Valley area. All work is done at your location.
Can you make car keys in La Verne?
Yes. We cut and program car keys on site anywhere in La Verne, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
