Quick answer
Access Code Programming: Adding, removing or changing access codes. Big Daddy Car Key Replacement provides access code programming service in Lakewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Code Programming
- Area
- Lakewood, Los Angeles County, CA (90712, 90713, 90715)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What access code programming involves
- Who uses this service
- Signs you need access code programming service
- Access Code Programming across Lakewood
- Our access code programming process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- Cost factors for access code programming service
- Why Lakewood customers choose Big Daddy
- Advice worth knowing
- Professional service compared with doing it yourself
- How we work on every job
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Lakewood
- Access Code Programming near Lakewood
- Access Code Programming in Lakewood: frequently asked questions
What access code programming involves
Adding, removing or changing access codes. Good code management keeps an electronic lock secure. We add and delete user codes, change master and programming codes, set passage mode and auto-relock, and document the settings for you. For businesses we program codes per person so the audit trail means something.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our access code programming service in Lakewood takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Lakewood range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Lakewood.
Signs you need access code programming service
People in Lakewood usually call us for access code programming service in situations like these:
- An employee or tenant has left
- The master code was shared too widely
- New users need codes today
- You need codes that expire automatically
Access Code Programming across Lakewood
Located in Los Angeles County, Lakewood is an incorporated city within our Gateway Cities service area. Customers anywhere in Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, Lakewood Country Club Estates, and the Carson Park edge, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90712, 90713, and 90715.
Lakewood is the original postwar planned suburb, with thousands of similar 1950s homes whose original doors and hardware are now being rekeyed, repaired or replaced with modern deadbolts.
Whether you are at home, at work, or stuck near Lakewood Center, the Lakewood Civic Center, Mayfair Park, or the neighboring Long Beach Airport, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Lakewood by I-605, SR-91, I-405, Lakewood Boulevard, Bellflower Boulevard, and Del Amo Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our access code programming process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A homeowner wants to let a contractor in while at work.
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
- Children get home from school before their parents and keep losing keys.
- A short-term rental needs a new code for every guest.
- A smart lock reports "jammed" every evening when the door swells.
- An apartment building wants to replace a shared entry key with fobs.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Audit trail
- A stored record of which credential opened a door and when.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
Cost factors for access code programming service
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Lakewood customers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lakewood.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Review the user list every few months and remove anyone who no longer needs access.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Turn on two-factor authentication for any account that can unlock your door.
- Delete factory default codes on the day of installation.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Lakewood
Customers who need access code programming service often ask about these as well. Each can usually be handled in the same visit to Lakewood.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Audit Trail Lock Systems
Installing locks that track access history.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
Access Code Programming near Lakewood
We provide the same access code programming service in the communities around Lakewood. See the main access code programming page or the full list of service areas.
- Access Code Programming in Bellflower
- Access Code Programming in Paramount
- Access Code Programming in Artesia
- Access Code Programming in Hawaiian Gardens
- Access Code Programming in Signal Hill
- Access Code Programming in Cerritos
- Access Code Programming in Norwalk
- Access Code Programming in Compton
- Access Code Programming in Downey
- Access Code Programming in Long Beach
- Access Code Programming in Lynwood
- Access Code Programming in Santa Fe Springs
Access Code Programming in Lakewood: frequently asked questions
How often should door codes be changed?
Delete a person’s code as soon as they no longer need access, and change shared codes every few months. Individual codes that can be removed one at a time are better than one code for everyone.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Which smart lock is best for a home in Lakewood?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Which parts of Lakewood do you serve?
All of Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, and Lakewood Country Club Estates, and addresses in ZIP codes 90712, 90713, and 90715.
Do you have a locksmith shop in Lakewood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lakewood and the rest of the Gateway Cities area. All work is done at your location.
Is there a travel charge for Lakewood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lakewood, so you know the cost in advance.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
