Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Exit Device Repair in Lakewood, CA

Need exit device repair service in Lakewood? Big Daddy Car Key Replacement sends a mobile locksmith to your home, business or vehicle, 24 hours a day. Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Exit Device Repair in Lakewood, CA by Big Daddy Car Key Replacement

Quick answer

Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in Lakewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Exit Device Repair
Area
Lakewood, Los Angeles County, CA (90712, 90713, 90715)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Commercial Locksmith Services
Phone
(562) 550-7206
On this page

What exit device repair means

Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Exit Device Repair in Lakewood, CA by Big Daddy Car Key Replacement
Exit Device Repair in Lakewood: mobile service, carried out at your location.

Every business in Lakewood eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.

Who we help in Lakewood

Our commercial customers in Lakewood include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.

This service is part of our commercial locksmith services in Lakewood.

Signs you need exit device repair service

If any of the following sounds familiar, exit device repair service is likely what you need:

  • Top or bottom rods do not engage
  • The outside lever no longer opens the door
  • The dogging key will not hold the bar down
  • The device rattles or the end cap is missing

Exit Device Repair across Lakewood

Lakewood is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our exit device repair service reaches all of Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, Lakewood Country Club Estates, and the Carson Park edge, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90712, 90713, and 90715 ZIP codes.

Lakewood is the original postwar planned suburb, with thousands of similar 1950s homes whose original doors and hardware are now being rekeyed, repaired or replaced with modern deadbolts.

Whether you are at home, at work, or stuck near Lakewood Center, the Lakewood Civic Center, Mayfair Park, or the neighboring Long Beach Airport, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Lakewood by I-605, SR-91, I-405, Lakewood Boulevard, Bellflower Boulevard, and Del Amo Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

How our exit device repair service works

  1. Discuss the need and the site

    We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.

  2. Verify authority

    Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.

  3. Survey the openings

    Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.

  4. Agree scope and price

    You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.

  5. Carry out the work around your schedule

    Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.

  6. Test, document and hand over

    Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing exit device repair service in Lakewood, California
Our technicians work from fully equipped vans throughout Lakewood.

Common situations in Lakewood

  • You are taking over a suite and need the previous tenant’s keys cut off before move-in.
  • The back door shows pry marks around the latch after the weekend.
  • A closer has failed and the front door slams hard enough to rattle the glass.
  • Staff need access to the sales floor but not the office, stockroom or IT closet.
  • A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
  • A manager is let go and returns only some of the keys issued.
  • The storefront door will not latch and the shop cannot be left for the night.

Equipment and hardware on the van

Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.

Trade terms explained

Exit device
Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
Cylindrical lock
A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Interchangeable core
A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
Master key system
A planned arrangement in which each lock has its own key and a master key opens all of them.
Lock function
How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
Mortise lock
A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
Door closer
A hydraulic device that closes a door at a controlled speed and holds it latched.
Restricted keyway
A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.

How exit device repair service is priced

After-hours scheduling
Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
Restricted or high-security keys
Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Electrified hardware
Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
Key system complexity
A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
Number and type of doors
Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
Hardware grade and function
Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Lakewood. The technician confirms the figure before starting.

Why Lakewood customers choose Big Daddy

One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lakewood.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Commercial locksmith work in Lakewood, CA
Commercial Locksmith Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
  • Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
  • Keep a written key log: who holds which key, and the date it was issued and returned.
  • Consider keypad or card access for doors with frequent staff turnover.
  • Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
  • Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
  • Never chain, padlock or bolt a required exit door while the building is occupied.
  • Test exit devices and door closers monthly. A door that does not latch is an unlocked door.

Doing it yourself versus calling a professional

Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.

What we commit to

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Questions to ask any locksmith

  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to Lakewood.

  • Storefront Lock Repair

    Repairing locks on glass storefront doors, aluminum doors and commercial entryways.

  • Rim Cylinder Replacement

    Replacing rim cylinders used with panic bars, exit devices and commercial doors.

  • Door Closer Repair

    Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.

  • Panic Bar Installation

    Installing panic bars, push bars and crash bars for emergency exits.

  • High-Security Commercial Locks

    Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.

  • Master Key System

    Creating a key hierarchy where owners, managers and employees have different levels of access.

  • Apartment Building Locksmith

    Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.

  • Mortise Lock Repair

    Repairing or replacing worn, jammed or damaged mortise lock systems.

  • Commercial Door Hardware

    Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.

  • Desk Lock Repair

    Repairing locks for desks, drawers and office furniture.

  • Deadbolt Installation

    Installing single-cylinder, double-cylinder, high-security or smart deadbolts.

  • Locksmith Near Me

    A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.

  • Car Lockout

    Unlocking vehicles when keys are locked inside.

  • Lock Rekey

    Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.

  • House Lockout

    Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.

Exit Device Repair near Lakewood

We provide the same exit device repair service in the communities around Lakewood. See the main exit device repair page or the full list of service areas.

Exit Device Repair in Lakewood: frequently asked questions

Can vertical rod exit devices be adjusted?

Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.

Do you offer ongoing service for multiple locations?

Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.

Who is allowed to authorize lock changes for a business?

The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.

Can you provide documentation for our records?

Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.

Can you work outside our business hours in Lakewood?

Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.

How long does it take to rekey a business?

A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.

How do we stop employees from copying keys?

Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.

What brands of commercial hardware do you service?

We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.

Are you open 24 hours in Lakewood?

Yes. We take calls and dispatch to Lakewood 24 hours a day, including weekends and holidays.

How long does it take a locksmith to reach me in Lakewood?

It depends on where the nearest technician is and on traffic along I-605, SR-91, or I-405. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Do you have a locksmith shop in Lakewood?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lakewood and the rest of the Gateway Cities area. All work is done at your location.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Call Now (562) 550-7206Open 24 hours · mobile locksmith