Quick answer
Retail Store Locksmith Service: Lock repair, rekeying, high-security locks and emergency unlocking for retail stores. Big Daddy Car Key Replacement provides retail store locksmith service in Lakewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Retail Store Locksmith Service
- Area
- Lakewood, Los Angeles County, CA (90712, 90713, 90715)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our retail store locksmith service
- Customers we serve in Lakewood
- Signs you need retail store locksmith service
- Retail Store Locksmith Service across Lakewood
- Our retail store locksmith process, step by step
- Typical calls we receive
- What our technicians bring
- A short glossary
- What affects the cost of retail store locksmith service
- What you can expect from us
- Advice worth knowing
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Lakewood
- Retail Store Locksmith Service near Lakewood
- Retail Store Locksmith Service in Lakewood: frequently asked questions
About our retail store locksmith service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores. Retail security starts at the storefront door and continues to the stockroom, office, display cases and cash wrap. We service storefront locks and exit devices, rekey after manager changes, install high-security cylinders and latch guards against pry attacks, and replace showcase and cabinet locks.

Every business in Lakewood eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our retail store locksmith service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Lakewood
Our commercial customers in Lakewood include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Lakewood.
Signs you need retail store locksmith service
If any of the following sounds familiar, retail store locksmith service is likely what you need:
- A manager or keyholder changed
- The storefront lock is sticking at open or close
- A smash or pry attempt damaged the door
- Display case keys are lost
Retail Store Locksmith Service across Lakewood
Located in Los Angeles County, Lakewood is an incorporated city within our Gateway Cities service area. Customers anywhere in Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, Lakewood Country Club Estates, and the Carson Park edge, can have a mobile technician sent directly to them. We serve the 90712, 90713, and 90715 ZIP codes.
Lakewood is the original postwar planned suburb, with thousands of similar 1950s homes whose original doors and hardware are now being rekeyed, repaired or replaced with modern deadbolts.
Whether you are at home, at work, or stuck near Lakewood Center, the Lakewood Civic Center, Mayfair Park, or the neighboring Long Beach Airport, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Lakewood by I-605, SR-91, I-405, Lakewood Boulevard, Bellflower Boulevard, and Del Amo Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our retail store locksmith process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The back door shows pry marks around the latch after the weekend.
- A closer has failed and the front door slams hard enough to rattle the glass.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
What affects the cost of retail store locksmith service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lakewood.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Store spare keys in a locked key cabinet, not a desk drawer.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Consider keypad or card access for doors with frequent staff turnover.
- Give each employee access only to the doors their job requires.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Lakewood
Customers who need retail store locksmith service often ask about these as well. Each can usually be handled in the same visit to Lakewood.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Retail Store Locksmith Service near Lakewood
We provide the same retail store locksmith service in the communities around Lakewood. See the main retail store locksmith service page or the full list of service areas.
- Retail Store Locksmith Service in Bellflower
- Retail Store Locksmith Service in Paramount
- Retail Store Locksmith Service in Artesia
- Retail Store Locksmith Service in Hawaiian Gardens
- Retail Store Locksmith Service in Signal Hill
- Retail Store Locksmith Service in Cerritos
- Retail Store Locksmith Service in Norwalk
- Retail Store Locksmith Service in Compton
- Retail Store Locksmith Service in Downey
- Retail Store Locksmith Service in Cypress
- Retail Store Locksmith Service in Long Beach
- Retail Store Locksmith Service in Lynwood
Retail Store Locksmith Service in Lakewood: frequently asked questions
What locks are best for a retail storefront?
A hook-bolt or long-throw deadbolt in the storefront stile, a high-security mortise cylinder with a hardened collar, and a latch guard on any out-swinging back door give strong protection against the common attacks.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Which parts of Lakewood do you serve?
All of Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, and Lakewood Country Club Estates, and addresses in ZIP codes 90712, 90713, and 90715.
Do you have a locksmith shop in Lakewood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lakewood and the rest of the Gateway Cities area. All work is done at your location.
Is there a travel charge for Lakewood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lakewood, so you know the cost in advance.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
