Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Strike Plate Adjustment in Lancaster, CA

For strike plate adjustment service in Lancaster, one call brings a fully equipped mobile locksmith to your location, day or night. Adjusting strike plates so doors latch and lock properly.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Strike Plate Adjustment in Lancaster, CA by Big Daddy Car Key Replacement

Quick answer

Strike Plate Adjustment: Adjusting strike plates so doors latch and lock properly. Big Daddy Car Key Replacement provides strike plate adjustment service in Lancaster as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Strike Plate Adjustment
Area
Lancaster, Los Angeles County, CA (93534, 93535, 93536)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

What strike plate adjustment means

Adjusting strike plates so doors latch and lock properly. The strike plate is the metal plate on the frame that receives the latch or bolt. If it sits a few millimetres off, the door rattles, will not latch, or the deadbolt binds. We reposition the plate, deepen the bolt pocket if it is too shallow, and secure it with long screws into the stud.

Strike Plate Adjustment in Lancaster, CA by Big Daddy Car Key Replacement
Strike Plate Adjustment in Lancaster: mobile service, carried out at your location.

If you have to lift, push or slam a door to get it to lock, something is out of line. For strike plate adjustment service in Lancaster, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.

Customers we serve in Lancaster

Door hardware calls in Lancaster come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Lancaster.

Reasons to call for strike plate adjustment service

People in Lancaster usually call us for strike plate adjustment service in situations like these:

  • The door rattles when closed
  • The latch hits the plate instead of entering
  • The deadbolt only extends partway
  • Scrape marks show above or below the strike hole

Strike Plate Adjustment across Lancaster

Located in Los Angeles County, Lancaster is an incorporated city within our Antelope Valley service area. Customers anywhere in Lancaster, including Downtown Lancaster and The BLVD, West Lancaster, East Lancaster, the Quartz Hill edge, and the Avenue K corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 93534, 93535, and 93536.

Lancaster is the Antelope Valley’s largest city, with wide streets of 1980s-to-2000s tract homes and long commutes, where desert heat and dust are hard on lock cylinders and car remotes alike.

If you are out and about near The BLVD, the Lancaster Performing Arts Center, Antelope Valley College, the Antelope Valley California Poppy Reserve, or the Lancaster Metrolink station, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Lancaster by SR-14, SR-138, Avenue K, Avenue L, Avenue J, and 10th Street West. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Our strike plate adjustment process, step by step

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Locksmith providing strike plate adjustment service in Lancaster, California
Our technicians work from fully equipped vans throughout Lancaster.

Common situations in Lancaster

  • A previous break-in left the jamb cracked around the strike.
  • The door drifts open by itself because the latch no longer catches.
  • A latch has jammed and someone is stuck in a room.
  • The back door swings outward and its latch is visible through the gap.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • The deadbolt only turns if you pull the door hard toward you.

Equipment and hardware on the van

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Trade terms explained

Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Strike plate
The plate on the frame that receives the latch or bolt.

How strike plate adjustment service is priced

Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Number of doors
Several doors in one visit cost less per door than separate calls.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.

We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.

Why call Big Daddy Car Key Replacement

Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lancaster.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Door Hardware locksmith work in Lancaster, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Practical advice from our locksmiths

  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.

Doing it yourself versus calling a professional

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

How we work on every job

Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.

Questions to ask any locksmith

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Get an itemized receipt showing labor, parts and the business details.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.

How to prepare for the visit

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.

Customers who need strike plate adjustment service often ask about these as well. Each can usually be handled in the same visit to Lancaster.

Strike Plate Adjustment near Lancaster

We provide the same strike plate adjustment service in the communities around Lancaster. See the main strike plate adjustment page or the full list of service areas.

Strike Plate Adjustment in Lancaster: frequently asked questions

How do I know if my strike plate is misaligned?

Look for shiny rub marks on the plate above or below the opening, or a bolt that stops short. Those marks show exactly how far the plate needs to move.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Do you have a locksmith shop in Lancaster?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lancaster and the rest of the Antelope Valley area. All work is done at your location.

How long does it take a locksmith to reach me in Lancaster?

It depends on where the nearest technician is and on traffic along SR-14, SR-138, or Avenue K. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Can you make car keys in Lancaster?

Yes. We cut and program car keys on site anywhere in Lancaster, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Call Now (562) 550-7206Open 24 hours · mobile locksmith