Quick answer
Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in Lomita as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Repair
- Area
- Lomita, Los Angeles County, CA (90717)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What deadbolt repair involves
- Customers we serve in Lomita
- When you need deadbolt repair service
- Deadbolt Repair across Lomita
- Our deadbolt repair process, step by step
- Typical calls we receive
- Equipment and hardware on the van
- Trade terms explained
- Cost factors for deadbolt repair service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Lomita
- Deadbolt Repair near Lomita
- Deadbolt Repair in Lomita: frequently asked questions
What deadbolt repair involves
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Homes change hands, tenants come and go, doors settle and locks wear. For deadbolt repair service in Lomita, we bring the workshop to your driveway: rekeying kits, deadbolts, locksets, strike plates and key machines. You get a clear recommendation, a price before work begins, and locks that are tested with you before we leave.
Customers we serve in Lomita
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Lomita. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Lomita.
When you need deadbolt repair service
People in Lomita usually call us for deadbolt repair service in situations like these:
- You have to push or pull the door to lock it
- The key turns but the bolt does not move
- The thumbturn is stiff or spins freely
- The deadbolt will not extend all the way
Deadbolt Repair across Lomita
Lomita is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. We cover every part of Lomita, including the Narbonne Avenue corridor, the Lomita Boulevard corridor, the Pacific Coast Highway corridor, and the hillside streets below Palos Verdes. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90717 ZIP code.
Lomita is a small residential city at the foot of the Palos Verdes hills, with older single-family homes and small businesses that favor straightforward, durable lock repairs and rekeys.
Whether you are at home, at work, or stuck near the Lomita Railroad Museum, Lomita Park, the neighboring Zamperini Field, or the Pacific Coast Highway business strip, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Lomita follows Pacific Coast Highway, Lomita Boulevard, Narbonne Avenue, Western Avenue, Crenshaw Boulevard, and Eshelman Avenue. You get a realistic arrival estimate when you call.
Our deadbolt repair process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A handbag with house keys and a driver’s license was stolen from a car.
- Each door in the house takes a different key and the ring keeps growing.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A roommate, partner or tenant has moved out and still has a key.
- An older parent is having trouble with a round knob and needs lever handles.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Keyed alike
- Several locks set to operate with the same key.
Cost factors for deadbolt repair service
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Lomita. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lomita.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
Doing it yourself versus calling a professional
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Lomita
Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to Lomita.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Eviction Locksmith Service
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
Deadbolt Repair near Lomita
We provide the same deadbolt repair service in the communities around Lomita. See the main deadbolt repair page or the full list of service areas.
- Deadbolt Repair in West Carson
- Deadbolt Repair in Rolling Hills Estates
- Deadbolt Repair in Rolling Hills
- Deadbolt Repair in Carson
- Deadbolt Repair in Torrance
- Deadbolt Repair in Palos Verdes Estates
- Deadbolt Repair in Rancho Palos Verdes
- Deadbolt Repair in Redondo Beach
- Deadbolt Repair in Gardena
- Deadbolt Repair in Hermosa Beach
- Deadbolt Repair in Lawndale
- Deadbolt Repair in Long Beach
Deadbolt Repair in Lomita: frequently asked questions
Why do I have to lift my door to lock the deadbolt?
The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Should I rekey or replace the locks in my Lomita home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can you make car keys in Lomita?
Yes. We cut and program car keys on site anywhere in Lomita, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Lomita?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lomita and the rest of the South Bay area. All work is done at your location.
Is there a travel charge for Lomita?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lomita, so you know the cost in advance.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
