Quick answer
Lock Repair: Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate. Big Daddy Car Key Replacement provides lock repair service in Lomita as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Repair
- Area
- Lomita, Los Angeles County, CA (90717)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our lock repair service
- Customers we serve in Lomita
- Signs you need lock repair service
- Lock Repair across Lomita
- What happens when you call
- Situations we handle regularly
- What our technicians bring
- Terms worth knowing
- Cost factors for lock repair service
- What you can expect from us
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- How to choose a locksmith you can trust
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Lomita
- Lock Repair near Lomita
- Lock Repair in Lomita: frequently asked questions
About our lock repair service
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate. A lock that sticks is warning you before it fails, usually at the worst time. Common causes are worn pins, a dry or dirty cylinder, a loose cylinder set screw, a bent tailpiece or a misaligned strike. We diagnose which it is and repair that part, which is typically much cheaper than a new lock.

Your locks are only as good as their condition and the keys in circulation. Our lock repair service in Lomita deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Customers we serve in Lomita
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Lomita. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Lomita.
Signs you need lock repair service
These are the most common reasons customers in Lomita ask for lock repair service:
- The key is hard to insert or remove
- You need to wiggle the key to make it turn
- The whole lock moves when you turn the key
- The latch does not catch when the door closes
Lock Repair across Lomita
Lomita is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Our lock repair service reaches all of Lomita, including the Narbonne Avenue corridor, the Lomita Boulevard corridor, the Pacific Coast Highway corridor, and the hillside streets below Palos Verdes, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 90717.
Lomita is a small residential city at the foot of the Palos Verdes hills, with older single-family homes and small businesses that favor straightforward, durable lock repairs and rekeys.
If you are out and about near the Lomita Railroad Museum, Lomita Park, the neighboring Zamperini Field, or the Pacific Coast Highway business strip, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Lomita follows Pacific Coast Highway, Lomita Boulevard, Narbonne Avenue, Western Avenue, Crenshaw Boulevard, and Eshelman Avenue. You get a realistic arrival estimate when you call.
What happens when you call
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
- Each door in the house takes a different key and the ring keeps growing.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A handbag with house keys and a driver’s license was stolen from a car.
- A roommate, partner or tenant has moved out and still has a key.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyed alike
- Several locks set to operate with the same key.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Cost factors for lock repair service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Lomita. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lomita.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Advice worth knowing
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Lomita
Customers who need lock repair service often ask about these as well. Each can usually be handled in the same visit to Lomita.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Lock Maintenance
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation.
- Eviction Locksmith Service
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
Lock Repair near Lomita
We provide the same lock repair service in the communities around Lomita. See the main lock repair page or the full list of service areas.
- Lock Repair in West Carson
- Lock Repair in Rolling Hills Estates
- Lock Repair in Rolling Hills
- Lock Repair in Carson
- Lock Repair in Torrance
- Lock Repair in Palos Verdes Estates
- Lock Repair in Rancho Palos Verdes
- Lock Repair in Redondo Beach
- Lock Repair in Gardena
- Lock Repair in Hermosa Beach
- Lock Repair in Lawndale
- Lock Repair in Long Beach
Lock Repair in Lomita: frequently asked questions
Should I spray WD-40 in a sticky lock?
No. Oil-based sprays attract dust and gum up the pins over time. Use a dry graphite or PTFE lock lubricant, and if the lock still sticks, the pins or key are worn and it is time for a repair.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Should I rekey or replace the locks in my Lomita home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Is there a travel charge for Lomita?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lomita, so you know the cost in advance.
Can you make car keys in Lomita?
Yes. We cut and program car keys on site anywhere in Lomita, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Lomita?
It depends on where the nearest technician is and on traffic along Pacific Coast Highway, Lomita Boulevard, or Narbonne Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
