Quick answer
Eviction Locksmith Service: Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement. Big Daddy Car Key Replacement provides eviction locksmith service in Lynwood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Eviction Locksmith Service
- Area
- Lynwood, Los Angeles County, CA (90262)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What eviction locksmith service means
- Who uses this service
- Signs you need eviction locksmith service
- Eviction Locksmith Service across Lynwood
- How our eviction locksmith service works
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- Cost factors for eviction locksmith service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Lynwood
- Eviction Locksmith Service near Lynwood
- Eviction Locksmith Service in Lynwood: frequently asked questions
What eviction locksmith service means
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement. In California a landlord cannot lock a tenant out on their own. After a court judgment, the Sheriff enforces the writ of possession and restores the property to the owner; that is the moment locks are changed. We meet the owner or manager at the scheduled lockout time, open the unit if needed, and rekey or replace every lock immediately.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our eviction locksmith service in Lynwood is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Lynwood. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Lynwood.
Signs you need eviction locksmith service
These are the most common reasons customers in Lynwood ask for eviction locksmith service:
- The Sheriff has scheduled a lockout date
- Possession was just returned to the owner
- A unit was abandoned and legally recovered
- A foreclosure or REO property needs securing
Eviction Locksmith Service across Lynwood
Located in Los Angeles County, Lynwood is an incorporated city within our Gateway Cities service area. Customers anywhere in Lynwood, including the Long Beach Boulevard corridor, the Imperial Highway corridor, the Atlantic Avenue corridor, and the Plaza México district, can have a mobile technician sent directly to them. That includes addresses in ZIP code 90262.
Lynwood sits at the 105 and 710 interchange, a city of modest homes and busy commercial boulevards where car lockouts, ignition repairs and security door locks are frequent requests.
People call us from all over Lynwood, including the areas around Plaza México, St. Francis Medical Center, Lynwood City Park, and the Lynwood Civic Center. A landmark or cross street helps the technician reach you quickly. Lynwood is served by I-105, I-710, Long Beach Boulevard, Imperial Highway, Atlantic Avenue, and Martin Luther King Jr. Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our eviction locksmith service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A handbag with house keys and a driver’s license was stolen from a car.
- A roommate, partner or tenant has moved out and still has a key.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- An older parent is having trouble with a round knob and needs lever handles.
- Each door in the house takes a different key and the ring keeps growing.
- A back door has only a locking knob, which can be slipped or forced in seconds.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Keyed alike
- Several locks set to operate with the same key.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
Cost factors for eviction locksmith service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
Doing it yourself versus calling a professional
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Lynwood
Customers who need eviction locksmith service often ask about these as well. Each can usually be handled in the same visit to Lynwood.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
Eviction Locksmith Service near Lynwood
We provide the same eviction locksmith service in the communities around Lynwood. See the main eviction locksmith service page or the full list of service areas.
- Eviction Locksmith Service in South Gate
- Eviction Locksmith Service in Compton
- Eviction Locksmith Service in Cudahy
- Eviction Locksmith Service in Willowbrook
- Eviction Locksmith Service in Bell
- Eviction Locksmith Service in Huntington Park
- Eviction Locksmith Service in Paramount
- Eviction Locksmith Service in Maywood
- Eviction Locksmith Service in Bell Gardens
- Eviction Locksmith Service in Downey
- Eviction Locksmith Service in Athens
- Eviction Locksmith Service in Vernon
Eviction Locksmith Service in Lynwood: frequently asked questions
When can the locks be changed during an eviction?
Only after the Sheriff has carried out the court’s writ of possession and returned the unit to the owner. Changing locks before that is an illegal self-help eviction in California. We schedule our visit to match the Sheriff’s lockout appointment.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Should I rekey or replace the locks in my Lynwood home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Is there a travel charge for Lynwood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lynwood, so you know the cost in advance.
Do you have a locksmith shop in Lynwood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lynwood and the rest of the Gateway Cities area. All work is done at your location.
Can you make car keys in Lynwood?
Yes. We cut and program car keys on site anywhere in Lynwood, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
