Quick answer
Access Code Programming: Adding, removing or changing access codes. Big Daddy Car Key Replacement provides access code programming service in Manhattan Beach as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Code Programming
- Area
- Manhattan Beach, Los Angeles County, CA (90266)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our access code programming service
- Who uses this service
- When you need access code programming service
- Access Code Programming across Manhattan Beach
- Our access code programming process, step by step
- Common situations in Manhattan Beach
- Equipment and hardware on the van
- Terms worth knowing
- How access code programming service is priced
- Why Manhattan Beach customers choose Big Daddy
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Manhattan Beach
- Access Code Programming near Manhattan Beach
- Access Code Programming in Manhattan Beach: frequently asked questions
About our access code programming service
Adding, removing or changing access codes. Good code management keeps an electronic lock secure. We add and delete user codes, change master and programming codes, set passage mode and auto-relock, and document the settings for you. For businesses we program codes per person so the audit trail means something.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our access code programming service in Manhattan Beach takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Manhattan Beach range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Manhattan Beach.
When you need access code programming service
If any of the following sounds familiar, access code programming service is likely what you need:
- An employee or tenant has left
- The master code was shared too widely
- New users need codes today
- You need codes that expire automatically
Access Code Programming across Manhattan Beach
Located in Los Angeles County, Manhattan Beach is an incorporated city within our South Bay service area. Customers anywhere in Manhattan Beach, including the Sand Section, the Tree Section, the Hill Section, East Manhattan, Manhattan Village, and El Porto, can have a mobile technician sent directly to them. That includes addresses in ZIP code 90266.
Manhattan Beach’s multi-level beach homes and walk-street properties often have several exterior doors, garage entries and gates, which makes keyed-alike rekeys and weather-resistant smart locks popular.
If you are out and about near the Manhattan Beach Pier and Roundhouse Aquarium, The Strand, Manhattan Village, Polliwog Park, or Metlox Plaza, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Manhattan Beach follows Sepulveda Boulevard, Manhattan Beach Boulevard, Rosecrans Avenue, Highland Avenue, Aviation Boulevard, and Marine Avenue. You get a realistic arrival estimate when you call.
Our access code programming process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Manhattan Beach
- A homeowner wants to let a contractor in while at work.
- An office wants to stop rekeying each time an employee leaves.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
- A business needs to know who entered the stockroom and when.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Audit trail
- A stored record of which credential opened a door and when.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
How access code programming service is priced
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Manhattan Beach customers choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Practical advice from our locksmiths
- Turn on two-factor authentication for any account that can unlock your door.
- Give each person their own code or credential so access can be removed individually.
- Review the user list every few months and remove anyone who no longer needs access.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Delete factory default codes on the day of installation.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Keep the mechanical override key somewhere accessible outside the locked area.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Manhattan Beach
Customers who need access code programming service often ask about these as well. Each can usually be handled in the same visit to Manhattan Beach.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Audit Trail Lock Systems
Installing locks that track access history.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
Access Code Programming near Manhattan Beach
We provide the same access code programming service in the communities around Manhattan Beach. See the main access code programming page or the full list of service areas.
- Access Code Programming in Hermosa Beach
- Access Code Programming in El Segundo
- Access Code Programming in Redondo Beach
- Access Code Programming in Lawndale
- Access Code Programming in Hawthorne
- Access Code Programming in Torrance
- Access Code Programming in Gardena
- Access Code Programming in Palos Verdes Estates
- Access Code Programming in Inglewood
- Access Code Programming in Athens
- Access Code Programming in Marina del Rey
- Access Code Programming in Rolling Hills Estates
Access Code Programming in Manhattan Beach: frequently asked questions
How often should door codes be changed?
Delete a person’s code as soon as they no longer need access, and change shared codes every few months. Individual codes that can be removed one at a time are better than one code for everyone.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Which smart lock is best for a home in Manhattan Beach?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can you make car keys in Manhattan Beach?
Yes. We cut and program car keys on site anywhere in Manhattan Beach, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Manhattan Beach do you serve?
All of Manhattan Beach, including the Sand Section, the Tree Section, the Hill Section, and East Manhattan, and addresses in ZIP code 90266.
Is there a travel charge for Manhattan Beach?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Manhattan Beach, so you know the cost in advance.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
