Quick answer
Access Control Installation: Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Big Daddy Car Key Replacement provides access control installation service in Manhattan Beach as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Control Installation
- Area
- Manhattan Beach, Los Angeles County, CA (90266)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our access control installation service
- Customers we serve in Manhattan Beach
- Signs you need access control installation service
- Access Control Installation across Manhattan Beach
- What happens when you call
- Common situations in Manhattan Beach
- Equipment and hardware on the van
- Terms worth knowing
- Cost factors for access control installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Manhattan Beach
- Access Control Installation near Manhattan Beach
- Access Control Installation in Manhattan Beach: frequently asked questions
About our access control installation service
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Access control replaces keys with credentials, cards, fobs, codes or phones, managed from software. Each door gets a reader, an electric lock, a door sensor and a request-to-exit device, wired to a controller. You decide who can enter which door at what times, and see a log of every entry.

Codes, cards, fobs and phones have made keys optional. For access control installation service in Manhattan Beach, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Customers we serve in Manhattan Beach
Electronic lock and access control customers in Manhattan Beach range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Manhattan Beach.
Signs you need access control installation service
People in Manhattan Beach usually call us for access control installation service in situations like these:
- Rekeying after every staff change is costing you
- You need to know who entered and when
- Different people need different door schedules
- Several doors or sites need central management
Access Control Installation across Manhattan Beach
Manhattan Beach is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. We cover every part of Manhattan Beach, including the Sand Section, the Tree Section, the Hill Section, East Manhattan, Manhattan Village, and El Porto. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 90266.
Manhattan Beach’s multi-level beach homes and walk-street properties often have several exterior doors, garage entries and gates, which makes keyed-alike rekeys and weather-resistant smart locks popular.
Whether you are at home, at work, or stuck near the Manhattan Beach Pier and Roundhouse Aquarium, The Strand, Manhattan Village, Polliwog Park, or Metlox Plaza, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Manhattan Beach by Sepulveda Boulevard, Manhattan Beach Boulevard, Rosecrans Avenue, Highland Avenue, Aviation Boulevard, and Marine Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Manhattan Beach
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
- An apartment building wants to replace a shared entry key with fobs.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Audit trail
- A stored record of which credential opened a door and when.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
Cost factors for access control installation service
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Manhattan Beach. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Manhattan Beach.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Advice worth knowing
- Review the user list every few months and remove anyone who no longer needs access.
- Delete factory default codes on the day of installation.
- Keep firmware up to date. Updates often fix security issues.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Turn on two-factor authentication for any account that can unlock your door.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Give each person their own code or credential so access can be removed individually.
- Avoid obvious codes such as birth years, addresses or repeated digits.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Manhattan Beach
Customers who need access control installation service often ask about these as well. Each can usually be handled in the same visit to Manhattan Beach.
- Key Fob Access Systems
Installing and programming key fob systems.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
Access Control Installation near Manhattan Beach
We provide the same access control installation service in the communities around Manhattan Beach. See the main access control installation page or the full list of service areas.
- Access Control Installation in Hermosa Beach
- Access Control Installation in El Segundo
- Access Control Installation in Redondo Beach
- Access Control Installation in Lawndale
- Access Control Installation in Hawthorne
- Access Control Installation in Torrance
- Access Control Installation in Gardena
- Access Control Installation in Palos Verdes Estates
- Access Control Installation in Inglewood
- Access Control Installation in Athens
- Access Control Installation in Marina del Rey
- Access Control Installation in Rolling Hills Estates
Access Control Installation in Manhattan Beach: frequently asked questions
How does an access control system work?
A reader checks a credential with a controller, which releases an electric lock if that person is allowed through that door at that time. The event is logged, and access can be changed or revoked instantly in software.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Which smart lock is best for a home in Manhattan Beach?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Do you have a locksmith shop in Manhattan Beach?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Manhattan Beach and the rest of the South Bay area. All work is done at your location.
Can you make car keys in Manhattan Beach?
Yes. We cut and program car keys on site anywhere in Manhattan Beach, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Manhattan Beach do you serve?
All of Manhattan Beach, including the Sand Section, the Tree Section, the Hill Section, and East Manhattan, and addresses in ZIP code 90266.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
