Quick answer
Drill-Resistant Lock Installation: Installing hardened locks and cylinders. Big Daddy Car Key Replacement provides drill-resistant lock installation service in Manhattan Beach as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Drill-Resistant Lock Installation
- Area
- Manhattan Beach, Los Angeles County, CA (90266)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Security Upgrade Services
- Phone
- (562) 550-7206
On this page
- What drill-resistant lock installation means
- Who we help in Manhattan Beach
- When you need drill-resistant lock installation service
- Drill-Resistant Lock Installation across Manhattan Beach
- Our drill-resistant lock installation process, step by step
- Situations we handle regularly
- Equipment and hardware on the van
- Terms worth knowing
- Cost factors for drill-resistant lock installation service
- Why call Big Daddy Car Key Replacement
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- What to have ready when you call
- Once the work is done
- Related locksmith services in Manhattan Beach
- Drill-Resistant Lock Installation near Manhattan Beach
- Drill-Resistant Lock Installation in Manhattan Beach: frequently asked questions
What drill-resistant lock installation means
Installing hardened locks and cylinders. Drilling attacks the shear line or the cylinder’s retaining screws. Drill-resistant locks place hardened steel pins, plates or ball bearings in those paths so bits skate or break. On commercial doors we add hardened cylinder collars and guard rings that also block wrench and pulling attacks.

Whether you want the strongest practical lock on a front door or key control for an entire business, our drill-resistant lock installation service in Manhattan Beach starts with an honest look at what you have. Call (562) 550-7206 and we will explain what matters and what does not.
Who we help in Manhattan Beach
Security upgrades in Manhattan Beach are requested by new homeowners, people who have experienced or witnessed a break-in, landlords meeting their obligations, and businesses responding to theft, an insurance requirement or a contract that demands key control.
This service is part of our security upgrade services in Manhattan Beach.
When you need drill-resistant lock installation service
If any of the following sounds familiar, drill-resistant lock installation service is likely what you need:
- A lock was drilled in a previous break-in
- You have exposed mortise or rim cylinders
- The door protects high-value contents
- You are fitting a new deadbolt and want it hardened
Drill-Resistant Lock Installation across Manhattan Beach
Located in Los Angeles County, Manhattan Beach is an incorporated city within our South Bay service area. Customers anywhere in Manhattan Beach, including the Sand Section, the Tree Section, the Hill Section, East Manhattan, Manhattan Village, and El Porto, can have a mobile technician sent directly to them. We serve the 90266 ZIP code.
Manhattan Beach’s multi-level beach homes and walk-street properties often have several exterior doors, garage entries and gates, which makes keyed-alike rekeys and weather-resistant smart locks popular.
Whether you are at home, at work, or stuck near the Manhattan Beach Pier and Roundhouse Aquarium, The Strand, Manhattan Village, Polliwog Park, or Metlox Plaza, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Manhattan Beach follows Sepulveda Boulevard, Manhattan Beach Boulevard, Rosecrans Avenue, Highland Avenue, Aviation Boulevard, and Marine Avenue. You get a realistic arrival estimate when you call.
Our drill-resistant lock installation process, step by step
Understand the concern
A recent incident, an insurance request, lost keys or general unease each lead to different priorities. We start by asking what prompted the call.
Walk the entry points
Every exterior door, sliding door, gate and garage entry is checked for lock grade, bolt throw, strike and frame strength, and exposure.
Review key control
We ask who has keys, whether they can be copied freely, and whether anyone who should not have access still might.
Prioritize the recommendations
You receive a ranked list: the inexpensive fixes with the biggest effect first, then upgrades that are worthwhile but optional.
Install the upgrades
High-security cylinders, deadbolts, reinforced strikes, door wraps and latch guards are fitted, and locks are rekeyed to the new system.
Register and hand over
For restricted key systems we record the authorized signers and issue numbered keys, so every copy from then on is accounted for.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- A neighbor was burgled through the back door and you want to check your own.
- You are away for long periods and want the house properly secured.
- You suspect someone entered without leaving any sign of force.
- A door was kicked in once and repaired with nothing stronger than before.
- Keys have been issued for years and no one can say how many exist.
- An insurer or client contract requires documented key control.
Equipment and hardware on the van
Security upgrades draw on a specific set of products: deadbolts and cylinders tested to UL 437 and the higher ANSI/BHMA grades, with hardened steel inserts, sidebars or other secondary locking and patent-protected keyways; heavy security strikes; full-length jamb reinforcement; wrap-around door plates; latch guards for out-swinging doors; hinge security studs; and secondary locks for sliding doors. We supply and install these and register key authorization for restricted systems.
Terms worth knowing
- Key control
- Knowing how many keys exist and who holds them, supported by keys that cannot be freely copied.
- Security pins
- Specially shaped pins, such as spools, that make a lock harder to pick.
- Lock bumping
- Opening a pin tumbler lock with a specially cut key and a light tap.
- Reinforced strike
- A heavy strike plate fastened with long screws into the wall framing.
- Hardened insert
- A piece of hardened steel placed inside a lock to stop drill bits.
- Patented keyway
- A key profile protected by patent, so blanks are legally restricted.
- UL 437
- A standard for key locks covering resistance to picking, drilling, prying and similar attacks.
- High-security lock
- A lock independently tested to resist picking, drilling and forcing, usually with restricted keys.
Cost factors for drill-resistant lock installation service
- Number of doors
- Most properties need the best hardware on two or three primary doors, not on every door.
- Door and frame condition
- A weak door or damaged frame needs reinforcement or replacement before a strong lock can help.
- Commercial requirements
- Business upgrades must respect fire and egress codes, which can determine the hardware.
- Key system
- Restricted keys cost more per key and are worth it where duplication control matters.
- Retrofit or full replacement
- Fitting high-security cylinders into existing locks is often cheaper than replacing whole locksets.
- Level of protection
- A reinforced strike and better deadbolt are modest in cost. UL-listed high-security locks with patented keys cost considerably more.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Manhattan Beach.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Tips to avoid problems
- Use restricted keys if you need to know exactly how many copies exist.
- Treat the door from the garage to the house as an exterior door.
- Add secondary locks and anti-lift protection to sliding doors.
- A deadbolt needs a full one-inch throw and a pocket deep enough to let it extend completely.
- Rekey after any loss of keys and after any change in who should have access.
- Solid-core or metal doors are a prerequisite. Hardware cannot rescue a hollow door.
- Secure the back and side doors to the same standard as the front. They are attacked more often.
- Trim shrubs near doors and keep entries lit. Visibility is a deterrent.
Why this is a job for a locksmith
It is easy to spend money on security that does little, such as a premium lock mounted on a jamb that splits with one kick, or a restricted key system undermined by one unprotected door. A locksmith looks at the whole opening and the whole key system, puts the budget where it has the most effect, and installs hardware so that it reaches the building’s structure.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Manhattan Beach
Customers who need drill-resistant lock installation service often ask about these as well. Each can usually be handled in the same visit to Manhattan Beach.
- Commercial Security Upgrade
Improving locks, access control, exit devices and door hardware for businesses.
- Lock Security Assessment
Inspecting locks, doors, frames and access points to recommend improvements.
- Reinforced Door Hardware
Installing heavy-duty hardware for better protection.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Home Security Lock Upgrade
Upgrading locks to improve safety and reduce break-in risk.
- Anti-Bump Lock Installation
Installing locks designed to resist lock bumping.
- Key Control Systems
Installing lock systems that prevent unauthorized key copies.
- Pick-Resistant Lock Installation
Installing locks with higher resistance to picking.
- Rental Property Security Upgrade
Changing locks, rekeying units, securing mailboxes and upgrading common areas.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
Drill-Resistant Lock Installation near Manhattan Beach
We provide the same drill-resistant lock installation service in the communities around Manhattan Beach. See the main drill-resistant lock installation page or the full list of service areas.
- Drill-Resistant Lock Installation in Hermosa Beach
- Drill-Resistant Lock Installation in El Segundo
- Drill-Resistant Lock Installation in Redondo Beach
- Drill-Resistant Lock Installation in Lawndale
- Drill-Resistant Lock Installation in Hawthorne
- Drill-Resistant Lock Installation in Torrance
- Drill-Resistant Lock Installation in Gardena
- Drill-Resistant Lock Installation in Palos Verdes Estates
- Drill-Resistant Lock Installation in Inglewood
- Drill-Resistant Lock Installation in Athens
- Drill-Resistant Lock Installation in Marina del Rey
- Drill-Resistant Lock Installation in Rolling Hills Estates
Drill-Resistant Lock Installation in Manhattan Beach: frequently asked questions
How do I know if my lock is drill resistant?
Look for a UL 437 listing or a manufacturer statement of hardened steel inserts. Standard residential locks are plain brass and have little drill resistance.
What does UL 437 mean?
It is a standard for key locks that requires resistance to picking, drilling and other attacks for specified times. A lock with that listing has been independently tested.
Do you offer a security assessment?
Yes. We inspect doors, locks, frames and key control and give you a prioritized list of improvements.
How do burglars usually get in?
Most often by forcing a door, kicking or prying at the latch side, or through an unlocked door or window. Reinforcing the door and frame addresses the most common method.
What do the ANSI/BHMA grades mean?
They are performance ratings. Grade 1 is the highest for strength and durability, Grade 2 is solid residential quality, and Grade 3 is basic.
What is the best security upgrade for a property in Manhattan Beach?
For most homes: a quality deadbolt with a one-inch bolt on each exterior door, reinforced strikes with long screws, and a rekey so only known keys exist. Businesses add high-security cylinders, latch guards and key control.
Will better locks lower my insurance?
Some insurers offer discounts for deadbolts and other protective devices. Ask your insurer what they recognize; we can document what was installed.
Are high-security locks worth the price?
On primary doors, yes. They resist picking, bumping and drilling, and their restricted keys cannot be copied without your authorization.
Do you have a locksmith shop in Manhattan Beach?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Manhattan Beach and the rest of the South Bay area. All work is done at your location.
How long does it take a locksmith to reach me in Manhattan Beach?
It depends on where the nearest technician is and on traffic along Sepulveda Boulevard, Manhattan Beach Boulevard, or Rosecrans Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Manhattan Beach?
Yes. We cut and program car keys on site anywhere in Manhattan Beach, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
