Quick answer
Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in Marina del Rey as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Repair
- Area
- Marina del Rey, Los Angeles County, CA (90292)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What exit device repair means
- Who we help in Marina del Rey
- When you need exit device repair service
- Exit Device Repair across Marina del Rey
- Our exit device repair process, step by step
- Common situations in Marina del Rey
- Equipment and hardware on the van
- A short glossary
- Cost factors for exit device repair service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Marina del Rey
- Exit Device Repair near Marina del Rey
- Exit Device Repair in Marina del Rey: frequently asked questions
What exit device repair means
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Every business in Marina del Rey eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Marina del Rey
Our commercial customers in Marina del Rey include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Marina del Rey.
When you need exit device repair service
These are the most common reasons customers in Marina del Rey ask for exit device repair service:
- Top or bottom rods do not engage
- The outside lever no longer opens the door
- The dogging key will not hold the bar down
- The device rattles or the end cap is missing
Exit Device Repair across Marina del Rey
Located in Los Angeles County, Marina del Rey is an unincorporated community within our Westside service area. We cover every part of Marina del Rey, including the marina basins, the Admiralty Way corridor, the Via Marina peninsula, and the Oxford Triangle edge. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 90292.
Marina del Rey is built around one of the largest small-craft harbors in the country, so boat ignition and cabin keys, dock box locks and waterfront apartment lockouts are everyday jobs.
Whether you are at home, at work, or stuck near Marina del Rey Harbor, Fisherman’s Village, Burton Chace Park, Mother’s Beach, or Waterside at Marina del Rey, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Marina del Rey by SR-90, Lincoln Boulevard, Admiralty Way, Via Marina, Washington Boulevard, and Mindanao Way. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our exit device repair process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Marina del Rey
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
Cost factors for exit device repair service
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Marina del Rey.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Advice worth knowing
- Give each employee access only to the doors their job requires.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Consider keypad or card access for doors with frequent staff turnover.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Marina del Rey
Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to Marina del Rey.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Exit Device Repair near Marina del Rey
We provide the same exit device repair service in the communities around Marina del Rey. See the main exit device repair page or the full list of service areas.
- Exit Device Repair in Santa Monica
- Exit Device Repair in Culver City
- Exit Device Repair in Ladera Heights
- Exit Device Repair in El Segundo
- Exit Device Repair in Inglewood
- Exit Device Repair in View Park–Windsor Hills
- Exit Device Repair in Manhattan Beach
- Exit Device Repair in Beverly Hills
- Exit Device Repair in Hawthorne
- Exit Device Repair in Lawndale
- Exit Device Repair in Hermosa Beach
- Exit Device Repair in Westmont
Exit Device Repair in Marina del Rey: frequently asked questions
Can vertical rod exit devices be adjusted?
Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in Marina del Rey?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Do you have a locksmith shop in Marina del Rey?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Marina del Rey and the rest of the Westside area. All work is done at your location.
Is there a travel charge for Marina del Rey?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Marina del Rey, so you know the cost in advance.
Which parts of Marina del Rey do you serve?
All of Marina del Rey, including the marina basins, the Admiralty Way corridor, the Via Marina peninsula, and the Oxford Triangle edge, and addresses in ZIP code 90292.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
