Quick answer
Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Maywood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Installation
- Area
- Maywood, Los Angeles County, CA (90270)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What lock installation involves
- Who uses this service
- Reasons to call for lock installation service
- Lock Installation across Maywood
- How our lock installation service works
- Situations we handle regularly
- Equipment and hardware on the van
- A short glossary
- What affects the cost of lock installation service
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- How we work on every job
- How to choose a locksmith you can trust
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Maywood
- Lock Installation near Maywood
- Lock Installation in Maywood: frequently asked questions
What lock installation involves
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our lock installation service in Maywood is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Maywood. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Maywood.
Reasons to call for lock installation service
These are the most common reasons customers in Maywood ask for lock installation service:
- A door has a knob but no deadbolt
- You added a home office or rental unit
- A new or replacement door arrived without hardware
- A garage entry or side door has no lock
Lock Installation across Maywood
Located in Los Angeles County, Maywood is an incorporated city within our Gateway Cities service area. We cover every part of Maywood, including the Slauson Avenue corridor, the Atlantic Boulevard corridor, and the riverfront blocks. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90270.
Maywood is barely over one square mile yet home to tens of thousands of residents, so most calls involve apartments, shared gates, mailbox locks and cars parked on crowded streets.
People call us from all over Maywood, including the areas around Maywood Riverfront Park, Maywood Park, the Slauson Avenue shopping strip, and the Maywood Civic Center. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Maywood follows I-710, Atlantic Boulevard, Slauson Avenue, Maywood Avenue, District Boulevard, and Randolph Street. You get a realistic arrival estimate when you call.
How our lock installation service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- Each door in the house takes a different key and the ring keeps growing.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A handbag with house keys and a driver’s license was stolen from a car.
- A roommate, partner or tenant has moved out and still has a key.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
A short glossary
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyed alike
- Several locks set to operate with the same key.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
What affects the cost of lock installation service
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Practical advice from our locksmiths
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Maywood
Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Maywood.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Apartment Locksmith Service
Lockouts, rekeys, lock changes and key copies for apartments and rental units.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Deadbolt Repair
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
Lock Installation near Maywood
We provide the same lock installation service in the communities around Maywood. See the main lock installation page or the full list of service areas.
- Lock Installation in Bell
- Lock Installation in Commerce
- Lock Installation in Cudahy
- Lock Installation in Huntington Park
- Lock Installation in Bell Gardens
- Lock Installation in East Los Angeles
- Lock Installation in South Gate
- Lock Installation in Vernon
- Lock Installation in Lynwood
- Lock Installation in Downey
- Lock Installation in Montebello
- Lock Installation in Pico Rivera
Lock Installation in Maywood: frequently asked questions
Can you install a lock on a door that has never had one?
Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Should I rekey or replace the locks in my Maywood home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
How long does it take a locksmith to reach me in Maywood?
It depends on where the nearest technician is and on traffic along I-710, Atlantic Boulevard, or Slauson Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Maywood do you serve?
All of Maywood, including the Slauson Avenue corridor, the Atlantic Boulevard corridor, and the riverfront blocks, and addresses in ZIP code 90270.
Do you have a locksmith shop in Maywood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Maywood and the rest of the Gateway Cities area. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
