Quick answer
Exit Device Installation: Installing code-compliant exit devices for commercial emergency exits. Big Daddy Car Key Replacement provides exit device installation service in Mission Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Installation
- Area
- Mission Hills, Los Angeles County, CA (91345)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What exit device installation involves
- Who uses this service
- Reasons to call for exit device installation service
- Exit Device Installation across Mission Hills
- Our exit device installation process, step by step
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- How exit device installation service is priced
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Mission Hills
- Exit Device Installation near Mission Hills
- Exit Device Installation in Mission Hills: frequently asked questions
What exit device installation involves
Installing code-compliant exit devices for commercial emergency exits. Exit device is the industry term for panic and fire exit hardware. Choosing one means matching device type to the door: rim devices for single doors, vertical rods or a mullion for pairs, mortise devices for heavy-use openings, and fire-rated devices without mechanical dogging on fire doors.

Every business in Mission Hills eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Mission Hills include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Mission Hills.
Reasons to call for exit device installation service
These are the most common reasons customers in Mission Hills ask for exit device installation service:
- A pair of doors needs compliant exit hardware
- A fire-rated door has non-rated hardware
- You want delayed egress or an exit alarm
- New construction needs hardware set to plan
Exit Device Installation across Mission Hills
Mission Hills is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our exit device installation service reaches all of Mission Hills, including the San Fernando Mission district, the Sepulveda Boulevard corridor, and the Rinaldi Street corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 91345.
Mission Hills sits where the 405, 5 and 118 meet, a neighborhood of 1950s tract homes and medical offices where commuters regularly need car lockout help and spare transponder keys.
People call us from all over Mission Hills, including the areas around Mission San Fernando Rey de España, Andrés Pico Adobe, Brand Park, and Providence Holy Cross Medical Center. A landmark or cross street helps the technician reach you quickly. Mission Hills is served by I-405, I-5, SR-118, Sepulveda Boulevard, San Fernando Mission Boulevard, and Rinaldi Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our exit device installation process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A manager is let go and returns only some of the keys issued.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- The back door shows pry marks around the latch after the weekend.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
How exit device installation service is priced
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Mission Hills. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Mission Hills.

Advice worth knowing
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Consider keypad or card access for doors with frequent staff turnover.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Mission Hills
Customers who need exit device installation service often ask about these as well. Each can usually be handled in the same visit to Mission Hills.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
Exit Device Installation near Mission Hills
We provide the same exit device installation service in the communities around Mission Hills. See the main exit device installation page or the full list of service areas.
- Exit Device Installation in North Hills
- Exit Device Installation in Arleta
- Exit Device Installation in Pacoima
- Exit Device Installation in San Fernando
- Exit Device Installation in Panorama City
- Exit Device Installation in Granada Hills
- Exit Device Installation in Sylmar
- Exit Device Installation in Lake Balboa
- Exit Device Installation in Northridge
- Exit Device Installation in Van Nuys
- Exit Device Installation in Valley Glen
- Exit Device Installation in Porter Ranch
Exit Device Installation in Mission Hills: frequently asked questions
What is the difference between panic hardware and fire exit hardware?
Both open with a push bar. Fire exit hardware is additionally tested and labeled for fire doors and cannot be mechanically dogged open, so the door always latches during a fire.
Can you work outside our business hours in Mission Hills?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How long does it take a locksmith to reach me in Mission Hills?
It depends on where the nearest technician is and on traffic along I-405, I-5, or SR-118. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for Mission Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Mission Hills, so you know the cost in advance.
Which parts of Mission Hills do you serve?
All of Mission Hills, including the San Fernando Mission district, the Sepulveda Boulevard corridor, and the Rinaldi Street corridor, and addresses in ZIP code 91345.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
