Quick answer
Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in Montebello as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Repair
- Area
- Montebello, Los Angeles County, CA (90640)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What exit device repair means
- Who we help in Montebello
- When you need exit device repair service
- Exit Device Repair across Montebello
- How our exit device repair service works
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- What affects the cost of exit device repair service
- Why Montebello customers choose Big Daddy
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Montebello
- Exit Device Repair near Montebello
- Exit Device Repair in Montebello: frequently asked questions
What exit device repair means
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Every business in Montebello eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Montebello
Our commercial customers in Montebello include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Montebello.
When you need exit device repair service
These are the most common reasons customers in Montebello ask for exit device repair service:
- Top or bottom rods do not engage
- The outside lever no longer opens the door
- The dogging key will not hold the bar down
- The device rattles or the end cap is missing
Exit Device Repair across Montebello
Located in Los Angeles County, Montebello is an incorporated city within our Gateway Cities service area. We cover every part of Montebello, including North Montebello, South Montebello, the Whittier Boulevard corridor, and the Montebello Hills. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 90640.
Montebello has established hillside neighborhoods in the north, industrial parks in the south and a traditional downtown on Whittier Boulevard, so residential, retail and warehouse jobs all come from the same city.
If you are out and about near The Shops at Montebello, the Montebello Golf Course, the Juan Matias Sanchez Adobe, or Montebello City Park, give us that location when you call and wait somewhere safe and visible. Montebello is served by SR-60, I-5, Whittier Boulevard, Beverly Boulevard, Montebello Boulevard, and Garfield Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our exit device repair service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- A manager is let go and returns only some of the keys issued.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The back door shows pry marks around the latch after the weekend.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
What affects the cost of exit device repair service
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Montebello customers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Montebello.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Advice worth knowing
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Give each employee access only to the doors their job requires.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Consider keypad or card access for doors with frequent staff turnover.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Montebello
Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to Montebello.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
Exit Device Repair near Montebello
We provide the same exit device repair service in the communities around Montebello. See the main exit device repair page or the full list of service areas.
- Exit Device Repair in Pico Rivera
- Exit Device Repair in Commerce
- Exit Device Repair in Monterey Park
- Exit Device Repair in East Los Angeles
- Exit Device Repair in Bell Gardens
- Exit Device Repair in South El Monte
- Exit Device Repair in Maywood
- Exit Device Repair in Bell
- Exit Device Repair in Rosemead
- Exit Device Repair in Santa Fe Springs
- Exit Device Repair in Whittier
- Exit Device Repair in Downey
Exit Device Repair in Montebello: frequently asked questions
Can vertical rod exit devices be adjusted?
Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you work outside our business hours in Montebello?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How long does it take a locksmith to reach me in Montebello?
It depends on where the nearest technician is and on traffic along SR-60, I-5, or Whittier Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Montebello?
Yes. We cut and program car keys on site anywhere in Montebello, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Montebello?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Montebello, so you know the cost in advance.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
