Quick answer
Commercial Door Hardware: Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Big Daddy Car Key Replacement provides commercial door hardware service in North Hollywood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware
- Area
- North Hollywood, Los Angeles County, CA (91601, 91602, 91605, 91606)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our commercial door hardware service
- Who uses this service
- Reasons to call for commercial door hardware service
- Commercial Door Hardware across North Hollywood
- Our commercial door hardware process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- How commercial door hardware service is priced
- Why North Hollywood customers choose Big Daddy
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Choosing a locksmith: a short checklist
- How to prepare for the visit
- Once the work is done
- Related locksmith services in North Hollywood
- Commercial Door Hardware near North Hollywood
- Commercial Door Hardware in North Hollywood: frequently asked questions
About our commercial door hardware service
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Commercial door hardware is specified by opening: the right hinge type and count, a closer, a lock or exit device with the correct function, and protection such as kick plates and latch guards. We supply and install complete hardware sets for tenant improvements and replace individual components that have worn out.

Every business in North Hollywood eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial door hardware service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in North Hollywood include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in North Hollywood.
Reasons to call for commercial door hardware service
People in North Hollywood usually call us for commercial door hardware service in situations like these:
- A build-out needs complete hardware sets
- Hardware finishes or functions do not match
- Doors lack kick plates or latch protection
- Hinges are worn and doors are sagging
Commercial Door Hardware across North Hollywood
North Hollywood is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our commercial door hardware service reaches all of North Hollywood, including the NoHo Arts District, Toluca Woods, the Lankershim corridor, and the Laurel Canyon corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 91601, 91602, 91605, and 91606.
North Hollywood has added thousands of apartments around the Metro station alongside older bungalows and production studios, creating a constant need for lockouts, access control service and keys for cars parked on busy streets.
Whether you are at home, at work, or stuck near the NoHo Arts District, El Portal Theatre, the North Hollywood Metro station, North Hollywood Park, or the Television Academy, tell the dispatcher the nearest landmark and we will find you. North Hollywood is served by SR-170, SR-134, US-101, Lankershim Boulevard, Magnolia Boulevard, and Victory Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our commercial door hardware process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
How commercial door hardware service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to North Hollywood. The technician confirms the figure before starting.
Why North Hollywood customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to North Hollywood.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Tips to avoid problems
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Consider keypad or card access for doors with frequent staff turnover.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in North Hollywood
Customers who need commercial door hardware service often ask about these as well. Each can usually be handled in the same visit to North Hollywood.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
Commercial Door Hardware near North Hollywood
We provide the same commercial door hardware service in the communities around North Hollywood. See the main commercial door hardware page or the full list of service areas.
- Commercial Door Hardware in Valley Village
- Commercial Door Hardware in Sun Valley
- Commercial Door Hardware in Valley Glen
- Commercial Door Hardware in Toluca Lake
- Commercial Door Hardware in Studio City
- Commercial Door Hardware in Van Nuys
- Commercial Door Hardware in Burbank
- Commercial Door Hardware in Sherman Oaks
- Commercial Door Hardware in Panorama City
- Commercial Door Hardware in Arleta
- Commercial Door Hardware in Pacoima
- Commercial Door Hardware in Lake View Terrace
Commercial Door Hardware in North Hollywood: frequently asked questions
What hardware does a commercial door need?
Typically hinges or pivots rated for the door’s weight, a closer, a Grade 1 lock or exit device with the right function, a strike, and weatherstripping and threshold on exterior doors. Fire-rated doors need labeled hardware throughout.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in North Hollywood?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Is there a travel charge for North Hollywood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to North Hollywood, so you know the cost in advance.
Are you open 24 hours in North Hollywood?
Yes. We take calls and dispatch to North Hollywood 24 hours a day, including weekends and holidays.
Can you make car keys in North Hollywood?
Yes. We cut and program car keys on site anywhere in North Hollywood, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
