Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2000 Mitsubishi Eclipse Key Replacement in Ojai, CA

Lost or broken 2000 Mitsubishi Eclipse key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle in Ojai, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2000 Mitsubishi Eclipse Key Replacement in Ojai, CA by Big Daddy Car Key Replacement

Quick answer

The 2000 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Mitsubishi Eclipse keys on site in Ojai, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2000 Mitsubishi Eclipse
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2000 Mitsubishi Eclipse use?

The 2000 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

2000 Mitsubishi Eclipse key replacement in Ojai
Traditional metal key for a 2000 Mitsubishi Eclipse, made on site in Ojai.

How we make a 2000 Mitsubishi Eclipse key

For the 2000 Mitsubishi Eclipse we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 2000 model year. For other years, see the Mitsubishi Eclipse key replacement overview, or browse all Mitsubishi models.

How Mitsubishi key and immobilizer systems work

Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.

Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.

Common Mitsubishi key and lock problems

These are the issues we see most often on Mitsubishi vehicles in Ojai:

  • Remotes that stop working while the chip still starts the car
  • Lost keys on models that need a PIN for programming
  • FAST-Key fobs not detected with a weak battery
  • Worn ignition cylinders on older Galant and Eclipse models

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Mitsubishi right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

2000 Mitsubishi Eclipse key replacement across Ojai

Ojai is an incorporated city in Ventura County, part of the area we cover every day. We cover every part of Ojai, including Downtown Ojai, the Arbolada, the East End, Meiners Oaks, Mira Monte, and Persimmon Hill. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 93023 ZIP code.

Ojai is a valley town of Spanish Revival buildings, ranches and vacation rentals, where rental keypad locks, gate hardware for rural properties and antique lock repair all come up.

People call us from all over Ojai, including the areas around Libbey Park and Libbey Bowl, the Ojai Arcade and Post Office Tower, the Ojai Valley Inn, Bart’s Books, and the Ojai Valley Trail. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Ojai follows SR-33, SR-150, Ojai Avenue, Ventura Avenue, Grand Avenue, and Signal Street. You get a realistic arrival estimate when you call.

Getting a 2000 Mitsubishi Eclipse key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2000 Mitsubishi Eclipse, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2000 Mitsubishi Eclipse key in Ojai
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Mitsubishi key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2000 Mitsubishi Eclipse key

Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.

Situations we are called to most often

  • The dash reads "key not detected" and the start button does nothing.
  • The key is locked in the trunk and the trunk release is disabled.
  • The key fob went through the washing machine.
  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.

Why drivers in Ojai choose Big Daddy

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Ojai.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Mitsubishi car key service in Ojai
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Mitsubishi key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.

Choosing a car locksmith you can trust

  • Get an itemized receipt showing labor, parts and the business details.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.

Other Mitsubishi Eclipse years

Other Mitsubishi models

2000 Mitsubishi Eclipse keys near Ojai

We make 2000 Mitsubishi Eclipse keys in the communities around Ojai as well. See the main 2000 Mitsubishi Eclipse key replacement page or the Ojai locksmith page.

2000 Mitsubishi Eclipse key replacement in Ojai: frequently asked questions

Does a 2000 Mitsubishi Eclipse key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 2000 Mitsubishi Eclipse key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Mitsubishi key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Can you program a key for my Mitsubishi?

Yes for most models. We cut the key, program the transponder and pair the remote on site.

Why does my Mitsubishi remote not work after the key was programmed?

The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.

Is a locksmith-made Mitsubishi key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Do you also repair the ignition on a 2000 Mitsubishi Eclipse?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

How many keys should I have for my 2000 Mitsubishi Eclipse?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Can you make a key for a 2000 Mitsubishi Eclipse if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Does car insurance cover a replacement Mitsubishi key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Which parts of Ojai do you serve?

All of Ojai, including Downtown Ojai, the Arbolada, the East End, and Meiners Oaks, and addresses in ZIP code 93023.

Are you open 24 hours in Ojai?

Yes. We take calls and dispatch to Ojai 24 hours a day, including weekends and holidays.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Call Now (562) 550-7206Open 24 hours · mobile locksmith