Quick answer
IC Core Lock Systems: Installing and rekeying interchangeable core lock systems for commercial properties. Big Daddy Car Key Replacement provides IC core lock service in Orange as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- IC Core Lock Systems
- Area
- Orange, Orange County, CA (92865, 92866, 92867, 92868, 92869)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What IC core lock systems means
- Customers we serve in Orange
- Reasons to call for IC core lock service
- IC Core Lock Systems across Orange
- Our IC core lock process, step by step
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- What affects the cost of IC core lock service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Orange
- IC Core Lock Systems near Orange
- IC Core Lock Systems in Orange: frequently asked questions
What IC core lock systems means
Installing and rekeying interchangeable core lock systems for commercial properties. Interchangeable core locks let you rekey a door in seconds: a special control key pulls the figure-eight core out and a new core drops in, with no disassembly. Schools, retail chains and property managers use them so staff can swap cores themselves after a key is lost, and send the old cores out to be repinned.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For IC core lock service in Orange, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Customers we serve in Orange
Our commercial customers in Orange include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Orange.
Reasons to call for IC core lock service
These are the most common reasons customers in Orange ask for IC core lock service:
- You rekey often because of staff turnover
- You manage many doors across locations
- You want to rekey without a service call each time
- An existing IC system needs new cores or keys
IC Core Lock Systems across Orange
Orange is an incorporated city in Orange County, part of the area we cover every day. Our IC core lock service reaches all of Orange, including Old Towne Orange, the Chapman University area, El Modena, Orange Park Acres, Santiago Hills, and the area around The Outlets at Orange, as well as the streets in between. You do not need to bring anything to a shop. We serve the 92865, 92866, 92867, 92868, and 92869 ZIP codes.
Orange grew around Old Towne, roughly a square mile of pre-1940 homes and storefronts surrounding the Plaza, and now also takes in a university, a cluster of hospitals, newer hillside neighborhoods and the horse properties of Orange Park Acres, so antique mortise locks, student rentals, medical office hardware and gate locks all turn up.
People call us from all over Orange, including the areas around the Orange Plaza in Old Towne, Chapman University, The Outlets at Orange, UCI Medical Center, and Providence St. Joseph Hospital. A landmark or cross street helps the technician reach you quickly. Orange is served by SR-55, SR-57, SR-22, I-5, Chapman Avenue, and Katella Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our IC core lock process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A manager is let go and returns only some of the keys issued.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The back door shows pry marks around the latch after the weekend.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
What affects the cost of IC core lock service
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Orange. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Practical advice from our locksmiths
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Give each employee access only to the doors their job requires.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Keep a written key log: who holds which key, and the date it was issued and returned.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Orange
Customers who need IC core lock service often ask about these as well. Each can usually be handled in the same visit to Orange.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
IC Core Lock Systems near Orange
We provide the same IC core lock service in the communities around Orange. See the main IC core lock systems page or the full list of service areas.
- IC Core Lock Systems in Santa Ana
- IC Core Lock Systems in Anaheim
- IC Core Lock Systems in Garden Grove
- IC Core Lock Systems in Placentia
- IC Core Lock Systems in Fullerton
- IC Core Lock Systems in Yorba Linda
- IC Core Lock Systems in Stanton
- IC Core Lock Systems in Buena Park
- IC Core Lock Systems in Cypress
- IC Core Lock Systems in La Mirada
- IC Core Lock Systems in Hawaiian Gardens
- IC Core Lock Systems in Cerritos
IC Core Lock Systems in Orange: frequently asked questions
What does IC core mean on a lock?
IC stands for interchangeable core. The keyed portion of the lock is a removable cartridge that a control key releases, so the lock can be rekeyed by swapping the core instead of taking the lock apart.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are you open 24 hours in Orange?
Yes. We take calls and dispatch to Orange 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Orange?
It depends on where the nearest technician is and on traffic along SR-55, SR-57, or SR-22. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for Orange?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Orange, so you know the cost in advance.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
