Quick answer
The 1990 Mercedes-Benz SL typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 Mercedes-Benz SL keys on site in Oxnard, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1990 Mercedes-Benz SL
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1990 Mercedes-Benz SL use?
- How we make a 1990 Mercedes-Benz SL key
- How Mercedes-Benz key and immobilizer systems work
- Common Mercedes-Benz key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mercedes-Benz right now?
- 1990 Mercedes-Benz SL key replacement across Oxnard
- Getting a 1990 Mercedes-Benz SL key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mercedes-Benz key?
- What affects the cost of a 1990 Mercedes-Benz SL key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Oxnard choose Big Daddy
- Looking after your Mercedes-Benz key
- Choosing a car locksmith you can trust
- Other Mercedes-Benz SL years
- Other Mercedes-Benz models
- Related automotive locksmith services in Oxnard
- 1990 Mercedes-Benz SL keys near Oxnard
- 1990 Mercedes-Benz SL key replacement in Oxnard: frequently asked questions
What kind of key does a 1990 Mercedes-Benz SL use?
The 1990 Mercedes-Benz SL typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1990 Mercedes-Benz SL key
For the 1990 Mercedes-Benz SL we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1990 model year. For other years, see the Mercedes-Benz SL key replacement overview, or browse all Mercedes-Benz models.
How Mercedes-Benz key and immobilizer systems work
Mercedes-Benz calls its immobilizer the Drive Authorization System. From the late 1990s the SmartKey, an infrared electronic key, replaced the metal ignition key and is read by the electronic ignition switch. Key data lives in the ignition switch and is tied to the VIN. Keys for the FBS3 generation can often be made on site; FBS4 vehicles, roughly 2015 and newer, generally require a dealer-supplied key.
Since the late 1990s Mercedes-Benz has used the SmartKey, an electronic key with no conventional ignition blade, with Keyless-Go as an option. Keys for many 2015-and-newer models are supplied only by the dealer against the VIN.
Common Mercedes-Benz key and lock problems
These are the issues we see most often on Mercedes-Benz vehicles in Oxnard:
- Electronic ignition switches that stop reading the key
- Electronic steering lock failures that prevent the key from turning
- Keys that work the remote functions but will not start the car
- Late-model keys available only through the dealer
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mercedes-Benz right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1990 Mercedes-Benz SL key replacement across Oxnard
Located in Ventura County, Oxnard is an incorporated city within our service area. Our Mercedes-Benz key replacement service reaches all of Oxnard, including RiverPark, Downtown Oxnard, Silver Strand, Hollywood Beach, Mandalay Bay, La Colonia, South Oxnard, and Sea View Estates, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 93030, 93033, 93035, and 93036.
Oxnard is Ventura County’s largest city, combining a working harbor, beach neighborhoods, agricultural operations and a major auto center, so marine keys, farm equipment locks and car key programming all apply.
Whether you are at home, at work, or stuck near Channel Islands Harbor, The Collection at RiverPark, Heritage Square, the Oxnard Auto Center, or the Oxnard Transit Center, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Oxnard follows US-101, Pacific Coast Highway, Rice Avenue, Rose Avenue, Ventura Road, and Victoria Avenue. You get a realistic arrival estimate when you call.
Getting a 1990 Mercedes-Benz SL key made, step by step
Call with the year, make and model
Tell us you need a key for a 1990 Mercedes-Benz SL, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mercedes-Benz key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1990 Mercedes-Benz SL key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Oxnard choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Mercedes-Benz key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Mercedes-Benz SL years
- 2026 SL
- 2025 SL
- 2024 SL
- 2023 SL
- 2022 SL
- 2021 SL
- 2020 SL
- 2019 SL
- 2018 SL
- 2017 SL
- 2016 SL
- 2015 SL
- 2014 SL
- 2013 SL
- 2012 SL
- 2011 SL
- 2010 SL
- 2009 SL
- 2008 SL
- 2007 SL
- 2006 SL
- 2005 SL
- 2004 SL
- 2003 SL
- 2002 SL
- 2001 SL
- 2000 SL
- 1999 SL
- 1998 SL
- 1997 SL
- 1996 SL
- 1995 SL
- 1994 SL
- 1993 SL
- 1992 SL
- 1991 SL
Other Mercedes-Benz models
- Mercedes-Benz S-Class keys
- Mercedes-Benz C-Class keys
- Mercedes-Benz E-Class keys
- Mercedes-Benz G-Class keys
- Mercedes-Benz SLK keys
- Mercedes-Benz CLS keys
- Mercedes-Benz M-Class keys
- Mercedes-Benz Sprinter keys
- Mercedes-Benz CLA keys
- Mercedes-Benz CLK keys
- Mercedes-Benz GLA keys
- Mercedes-Benz GLC keys
- Mercedes-Benz GLE keys
Related automotive locksmith services in Oxnard
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
1990 Mercedes-Benz SL keys near Oxnard
We make 1990 Mercedes-Benz SL keys in the communities around Oxnard as well. See the main 1990 Mercedes-Benz SL key replacement page or the Oxnard locksmith page.
- 1990 Mercedes-Benz SL keys in Port Hueneme
- 1990 Mercedes-Benz SL keys in Ventura
- 1990 Mercedes-Benz SL keys in Camarillo
- 1990 Mercedes-Benz SL keys in Santa Paula
- 1990 Mercedes-Benz SL keys in Ojai
- 1990 Mercedes-Benz SL keys in Moorpark
- 1990 Mercedes-Benz SL keys in Thousand Oaks
- 1990 Mercedes-Benz SL keys in Fillmore
- 1990 Mercedes-Benz SL keys in Westlake Village
- 1990 Mercedes-Benz SL keys in Simi Valley
- 1990 Mercedes-Benz SL keys in Agoura Hills
- 1990 Mercedes-Benz SL keys in Malibu
1990 Mercedes-Benz SL key replacement in Oxnard: frequently asked questions
Does a 1990 Mercedes-Benz SL key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1990 Mercedes-Benz SL key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Mercedes-Benz key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can you make a key for my Mercedes-Benz?
For many models through the mid-2010s, yes. Newer vehicles on the FBS4 system usually need a key ordered from the dealer with proof of ownership. Give us the year and VIN and we will tell you straight.
My Mercedes-Benz key will not turn in the ignition. Is it the key?
It may be the key, the electronic ignition switch or the steering lock. Each produces similar symptoms, so proper diagnosis comes before any key is ordered.
Can you make a key for a 1990 Mercedes-Benz SL if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Is a locksmith-made Mercedes-Benz key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Does car insurance cover a replacement Mercedes-Benz key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How much does a 1990 Mercedes-Benz SL key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
What do you need from me to make a 1990 Mercedes-Benz SL key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Is there a travel charge for Oxnard?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Oxnard, so you know the cost in advance.
How long does it take a locksmith to reach me in Oxnard?
It depends on where the nearest technician is and on traffic along US-101, Pacific Coast Highway, or Rice Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
