Quick answer
Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Oxnard as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Installation
- Area
- Oxnard, Ventura County, CA (93030, 93033, 93035, 93036)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What lock installation involves
- Customers we serve in Oxnard
- When you need lock installation service
- Lock Installation across Oxnard
- Our lock installation process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- Trade terms explained
- Cost factors for lock installation service
- What you can expect from us
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Choosing a locksmith: a short checklist
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Oxnard
- Lock Installation near Oxnard
- Lock Installation in Oxnard: frequently asked questions
What lock installation involves
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our lock installation service in Oxnard is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Customers we serve in Oxnard
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Oxnard. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Oxnard.
When you need lock installation service
People in Oxnard usually call us for lock installation service in situations like these:
- A door has a knob but no deadbolt
- You added a home office or rental unit
- A new or replacement door arrived without hardware
- A garage entry or side door has no lock
Lock Installation across Oxnard
Located in Ventura County, Oxnard is an incorporated city within our Ventura County service area. Customers anywhere in Oxnard, including RiverPark, Downtown Oxnard, Silver Strand, Hollywood Beach, Mandalay Bay, La Colonia, South Oxnard, and Sea View Estates, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 93030, 93033, 93035, and 93036.
Oxnard is Ventura County’s largest city, combining a working harbor, beach neighborhoods, agricultural operations and a major auto center, so marine keys, farm equipment locks and car key programming all apply.
Whether you are at home, at work, or stuck near Channel Islands Harbor, The Collection at RiverPark, Heritage Square, the Oxnard Auto Center, or the Oxnard Transit Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Oxnard by US-101, Pacific Coast Highway, Rice Avenue, Rose Avenue, Ventura Road, and Victoria Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our lock installation process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- Each door in the house takes a different key and the ring keeps growing.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A roommate, partner or tenant has moved out and still has a key.
- A handbag with house keys and a driver’s license was stolen from a car.
- An older parent is having trouble with a round knob and needs lever handles.
Tools, parts and hardware we carry
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyed alike
- Several locks set to operate with the same key.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
Cost factors for lock installation service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Oxnard.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Tips to avoid problems
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Oxnard
Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Oxnard.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Apartment Locksmith Service
Lockouts, rekeys, lock changes and key copies for apartments and rental units.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
Lock Installation near Oxnard
We provide the same lock installation service in the communities around Oxnard. See the main lock installation page or the full list of service areas.
- Lock Installation in Port Hueneme
- Lock Installation in Ventura
- Lock Installation in Camarillo
- Lock Installation in Santa Paula
- Lock Installation in Ojai
- Lock Installation in Moorpark
- Lock Installation in Thousand Oaks
- Lock Installation in Fillmore
- Lock Installation in Westlake Village
- Lock Installation in Simi Valley
- Lock Installation in Agoura Hills
- Lock Installation in Malibu
Lock Installation in Oxnard: frequently asked questions
Can you install a lock on a door that has never had one?
Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Should I rekey or replace the locks in my Oxnard home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can you make car keys in Oxnard?
Yes. We cut and program car keys on site anywhere in Oxnard, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Oxnard?
Yes. We take calls and dispatch to Oxnard 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Oxnard?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Oxnard and the rest of the Ventura County area. All work is done at your location.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
