Quick answer
Lock Maintenance: Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation. Big Daddy Car Key Replacement provides lock maintenance service in Oxnard as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Maintenance
- Area
- Oxnard, Ventura County, CA (93030, 93033, 93035, 93036)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What lock maintenance means
- Customers we serve in Oxnard
- Reasons to call for lock maintenance service
- Lock Maintenance across Oxnard
- Our lock maintenance process, step by step
- Typical calls we receive
- Equipment and hardware on the van
- Terms worth knowing
- How lock maintenance service is priced
- What you can expect from us
- Advice worth knowing
- Doing it yourself versus calling a professional
- Our service standards
- Questions to ask any locksmith
- What to have ready when you call
- After the visit
- Related locksmith services in Oxnard
- Lock Maintenance near Oxnard
- Lock Maintenance in Oxnard: frequently asked questions
What lock maintenance means
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation. Locks are small machines that live outdoors. A maintenance visit includes cleaning and dry-lubricating cylinders, tightening mounting screws and set screws, checking bolt throw and strike alignment, lubricating latches and hinges, and flagging any lock that is close to failure so you can plan the fix.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our lock maintenance service in Oxnard is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Customers we serve in Oxnard
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Oxnard. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Oxnard.
Reasons to call for lock maintenance service
People in Oxnard usually call us for lock maintenance service in situations like these:
- Locks have never been serviced since installation
- Keys feel gritty or stiff in several doors
- You live near the coast or in a dusty area
- You manage a rental and want fewer lockout calls
Lock Maintenance across Oxnard
Oxnard is an incorporated city in Ventura County, part of the Ventura County area we cover every day. We cover every part of Oxnard, including RiverPark, Downtown Oxnard, Silver Strand, Hollywood Beach, Mandalay Bay, La Colonia, South Oxnard, and Sea View Estates. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 93030, 93033, 93035, and 93036.
Oxnard is Ventura County’s largest city, combining a working harbor, beach neighborhoods, agricultural operations and a major auto center, so marine keys, farm equipment locks and car key programming all apply.
If you are out and about near Channel Islands Harbor, The Collection at RiverPark, Heritage Square, the Oxnard Auto Center, or the Oxnard Transit Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Oxnard follows US-101, Pacific Coast Highway, Rice Avenue, Rose Avenue, Ventura Road, and Victoria Avenue. You get a realistic arrival estimate when you call.
Our lock maintenance process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- Each door in the house takes a different key and the ring keeps growing.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A roommate, partner or tenant has moved out and still has a key.
- An older parent is having trouble with a round knob and needs lever handles.
- A handbag with house keys and a driver’s license was stolen from a car.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Keyed alike
- Several locks set to operate with the same key.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
How lock maintenance service is priced
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Oxnard. The technician confirms the figure before starting.
What you can expect from us
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Advice worth knowing
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
Doing it yourself versus calling a professional
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Oxnard
Customers who need lock maintenance service often ask about these as well. Each can usually be handled in the same visit to Oxnard.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
Lock Maintenance near Oxnard
We provide the same lock maintenance service in the communities around Oxnard. See the main lock maintenance page or the full list of service areas.
- Lock Maintenance in Port Hueneme
- Lock Maintenance in Ventura
- Lock Maintenance in Camarillo
- Lock Maintenance in Santa Paula
- Lock Maintenance in Ojai
- Lock Maintenance in Moorpark
- Lock Maintenance in Thousand Oaks
- Lock Maintenance in Fillmore
- Lock Maintenance in Westlake Village
- Lock Maintenance in Simi Valley
- Lock Maintenance in Agoura Hills
- Lock Maintenance in Malibu
Lock Maintenance in Oxnard: frequently asked questions
How often should door locks be serviced?
Once a year is enough for most homes. Coastal properties and high-traffic doors benefit from service every six months, because salt, sand and constant use wear cylinders and latches faster.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Should I rekey or replace the locks in my Oxnard home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
How long does it take a locksmith to reach me in Oxnard?
It depends on where the nearest technician is and on traffic along US-101, Pacific Coast Highway, or Rice Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Oxnard do you serve?
All of Oxnard, including RiverPark, Downtown Oxnard, Silver Strand, and Hollywood Beach, and addresses in ZIP codes 93030, 93033, 93035, and 93036.
Can you make car keys in Oxnard?
Yes. We cut and program car keys on site anywhere in Oxnard, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
