Quick answer
The 1997 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1997 Chrysler Sebring keys on site in Paramount, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Chrysler Sebring
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Chrysler Sebring use?
- How we make a 1997 Chrysler Sebring key
- How Chrysler key and immobilizer systems work
- Common Chrysler key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chrysler right now?
- 1997 Chrysler Sebring key replacement across Paramount
- Getting a 1997 Chrysler Sebring key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chrysler key?
- What affects the cost of a 1997 Chrysler Sebring key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Paramount choose Big Daddy
- Looking after your Chrysler key
- Choosing a car locksmith you can trust
- Other Chrysler Sebring years
- Other Chrysler models
- Related automotive locksmith services in Paramount
- 1997 Chrysler Sebring keys near Paramount
- 1997 Chrysler Sebring key replacement in Paramount: frequently asked questions
What kind of key does a 1997 Chrysler Sebring use?
The 1997 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Chrysler Sebring key
For the 1997 Chrysler Sebring we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Chrysler Sebring key replacement overview, or browse all Chrysler models.
How Chrysler key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.
Common Chrysler key and lock problems
These are the issues we see most often on Chrysler vehicles in Paramount:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chrysler right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1997 Chrysler Sebring key replacement across Paramount
Paramount is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our Chrysler key replacement service reaches all of Paramount, including the Paramount Boulevard corridor, the Somerset corridor, the industrial district along Garfield, and the Alondra corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 90723.
Paramount mixes compact residential neighborhoods with metal shops, manufacturers and warehouses, so industrial padlocks, roll-up door locks and work-truck keys are as common as house calls.
If you are out and about near the Paramount Swap Meet, Paramount Iceland, Paramount Park, or Progress Park, give us that location when you call and wait somewhere safe and visible. Paramount is served by I-105, I-710, SR-91, Paramount Boulevard, Rosecrans Avenue, and Alondra Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1997 Chrysler Sebring key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Chrysler Sebring, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chrysler key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Chrysler Sebring key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
Why drivers in Paramount choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Paramount.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Chrysler key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Chrysler Sebring years
- 2010 Sebring
- 2009 Sebring
- 2008 Sebring
- 2007 Sebring
- 2006 Sebring
- 2005 Sebring
- 2004 Sebring
- 2003 Sebring
- 2002 Sebring
- 2001 Sebring
- 2000 Sebring
- 1999 Sebring
- 1998 Sebring
- 1996 Sebring
- 1995 Sebring
Other Chrysler models
- Chrysler Town & Country keys
- Chrysler 300 keys
- Chrysler Pacifica keys
- Chrysler Concorde keys
- Chrysler PT Cruiser keys
- Chrysler Voyager keys
- Chrysler LHS keys
- Chrysler 200 keys
- Chrysler 300M keys
- Chrysler Cirrus keys
- Chrysler Crossfire keys
- Chrysler Aspen keys
Related automotive locksmith services in Paramount
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Key Fob Programming
Programming new or replacement key fobs.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Spare Car Key
Creating duplicate or backup keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
1997 Chrysler Sebring keys near Paramount
We make 1997 Chrysler Sebring keys in the communities around Paramount as well. See the main 1997 Chrysler Sebring key replacement page or the Paramount locksmith page.
- 1997 Chrysler Sebring keys in Bellflower
- 1997 Chrysler Sebring keys in Lakewood
- 1997 Chrysler Sebring keys in Compton
- 1997 Chrysler Sebring keys in Downey
- 1997 Chrysler Sebring keys in Lynwood
- 1997 Chrysler Sebring keys in Norwalk
- 1997 Chrysler Sebring keys in Artesia
- 1997 Chrysler Sebring keys in Cudahy
- 1997 Chrysler Sebring keys in Bell Gardens
- 1997 Chrysler Sebring keys in South Gate
- 1997 Chrysler Sebring keys in Willowbrook
- 1997 Chrysler Sebring keys in Santa Fe Springs
1997 Chrysler Sebring key replacement in Paramount: frequently asked questions
Does a 1997 Chrysler Sebring key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Chrysler Sebring key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chrysler key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Chrysler key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Chrysler with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Can you make a 1997 Chrysler Sebring key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
What do you need from me to make a 1997 Chrysler Sebring key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Does car insurance cover a replacement Chrysler key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Is a locksmith-made Chrysler key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you program a key I bought online for my 1997 Chrysler Sebring?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Is there a travel charge for Paramount?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Paramount, so you know the cost in advance.
How long does it take a locksmith to reach me in Paramount?
It depends on where the nearest technician is and on traffic along I-105, I-710, or SR-91. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
