Quick answer
The 1997 Acura RL typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Acura RL keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Acura RL
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Acura RL use?
- How we make a 1997 Acura RL key
- How Acura key and immobilizer systems work
- Common Acura key and lock problems
- All keys lost or just need a spare?
- Stranded with your Acura right now?
- 1997 Acura RL key replacement across Pasadena
- Getting a 1997 Acura RL key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Acura key?
- What affects the cost of a 1997 Acura RL key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pasadena choose Big Daddy
- Looking after your Acura key
- Choosing a car locksmith you can trust
- Other Acura RL years
- Other Acura models
- Related automotive locksmith services in Pasadena
- 1997 Acura RL keys near Pasadena
- 1997 Acura RL key replacement in Pasadena: frequently asked questions
What kind of key does a 1997 Acura RL use?
The 1997 Acura RL typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Acura RL key
For the 1997 Acura RL we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Acura RL key replacement overview, or browse all Acura models.
How Acura key and immobilizer systems work
Honda and Acura immobilizers register each key’s transponder in the engine computer or immobilizer unit. There is no owner self-programming; a diagnostic tool is always required. Most models from the early 2000s use a laser-cut blade, later ones a remote-head key, and Smart Entry proximity keys appear from the mid-2010s. When adding a key, existing keys are usually re-registered in the same session.
Acura adopted laser-cut keys and immobilizers earlier than most brands, and its Keyless Access proximity system spread across the range from the RL in 2005. Many Acura smart keys are tied to driver memory positions, so each key is numbered.
Common Acura key and lock problems
These are the issues we see most often on Acura vehicles in Pasadena:
- Worn laser-cut keys that stop turning the ignition smoothly
- Ignition cylinders with sticking wafers on high-mileage Accord, Civic and CR-V models
- A flashing green key light when the chip is not recognized
- Remote-head keys with cracked cases or worn buttons
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Acura right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1997 Acura RL key replacement across Pasadena
Pasadena is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
Whether you are at home, at work, or stuck near the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, or Pasadena City Hall, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.
Getting a 1997 Acura RL key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Acura RL, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Acura key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Acura RL key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Pasadena choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.

Looking after your Acura key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Acura RL years
- 2012 RL
- 2011 RL
- 2010 RL
- 2009 RL
- 2008 RL
- 2007 RL
- 2006 RL
- 2005 RL
- 2004 RL
- 2003 RL
- 2002 RL
- 2001 RL
- 2000 RL
- 1999 RL
- 1998 RL
- 1996 RL
Other Acura models
- Acura MDX keys
- Acura NSX keys
- Acura RDX keys
- Acura TL keys
- Acura Integra keys
- Acura TLX keys
- Acura TSX keys
- Acura ILX keys
- Acura CL keys
- Acura RLX keys
- Acura ZDX keys
- Acura Legend keys
- Acura RSX keys
Related automotive locksmith services in Pasadena
- Key Fob Programming
Programming new or replacement key fobs.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
1997 Acura RL keys near Pasadena
We make 1997 Acura RL keys in the communities around Pasadena as well. See the main 1997 Acura RL key replacement page or the Pasadena locksmith page.
- 1997 Acura RL keys in South Pasadena
- 1997 Acura RL keys in San Marino
- 1997 Acura RL keys in Altadena
- 1997 Acura RL keys in Alhambra
- 1997 Acura RL keys in San Gabriel
- 1997 Acura RL keys in La Cañada Flintridge
- 1997 Acura RL keys in Sierra Madre
- 1997 Acura RL keys in Temple City
- 1997 Acura RL keys in Monterey Park
- 1997 Acura RL keys in Rosemead
- 1997 Acura RL keys in Arcadia
- 1997 Acura RL keys in Glendale
1997 Acura RL key replacement in Pasadena: frequently asked questions
Does a 1997 Acura RL key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Acura RL key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Acura key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
What does the blinking green key light on my Acura dashboard mean?
The immobilizer is not recognizing the key’s transponder. The chip may be damaged, the key may be unprogrammed, or another chip key on the ring may be interfering.
Can I program a Acura key myself?
No. The immobilizer requires a diagnostic tool to register keys. Remote buttons on some older models can be paired by a manual sequence, but the chip cannot.
What do you need from me to make a 1997 Acura RL key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you unlock my 1997 Acura RL if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Can you program a key I bought online for my 1997 Acura RL?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you make a key for a 1997 Acura RL if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you make a 1997 Acura RL key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you make car keys in Pasadena?
Yes. We cut and program car keys on site anywhere in Pasadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Pasadena?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Pasadena and the rest of the San Gabriel Valley area. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
